Thanks for your precious help!! PCMCIA USB2 ADAPTER U9.10 issue ;-(
ccpgrinner at free.fr
ccpgrinner at free.fr
Thu Mar 18 02:31:26 EDT 2010
Hi!
Here are the outputs...
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory
Controller Hub (rev 11)
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics
Controller (CGC) (rev 11)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801BAM IDE U100 Controller (rev 03)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 03)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 03)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio
Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem Controller (rev 03)
01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller
(PHY/Link Integrated) (rev 02)
01:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
*******
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory
Controller Hub (rev 11)
Subsystem: Sony Corporation Device 80df
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics
Controller (CGC) (rev 11)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=09, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4100000-f41fffff
Prefetchable memory behind bridge: 20000000-27ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801BAM IDE U100 Controller (rev 03)
(prog-if 80 [Master])
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1]
Region 4: I/O ports at 1800 [size=16]
Kernel driver in use: ata_piix
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 03)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 03)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1810 [size=16]
Kernel modules: i2c-i801
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 03)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 2400 [size=32]
Kernel driver in use: uhci_hcd
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio
Controller (rev 03)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1840 [size=64]
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem Controller (rev 03)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 1880 [size=128]
Kernel modules: snd-intel8x0m
01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller
(PHY/Link Integrated) (rev 02) (prog-if 10)
Subsystem: Sony Corporation Device 80df
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f4104000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f4100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: firewire-ohci, ohci1394
01:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f4105000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
01:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: Sony Corporation Device 80df
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 0
Region 0: Memory at f4106000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
More information about the linux-pcmcia
mailing list