PCMCIA cards not detected

raraks raraks at gmail.com
Tue Mar 9 19:16:28 EST 2010 

I am trying to develop a driver for a 16-bit PCMCIA card on Ubuntu 
(v2.6.31-17) and have a desktop machine with an ActionTec PCI card to pcmcia 
adapter. So far I havent gotten anywhere with it. It appears that the card 
is not even identified correctly and I dont know what options to change or 
set. I would expect that at least the card identification information like 
manufacturer would be read correctly .. but I get nothing. This appears to 
be the case for every single card that I insert.

dmesg indicates that a card was inserted or removed .. but nothing else 
happens.

So how do I go about debugging this ? Any help would be appreciated.

Thanks

Relevant Outputs  from pccardctl, lspci, etc. follow:
-------------------------------------------------------------------------------------------------------
sudo pccardctl ident
Socket 0:
no product info available
Socket 1:
no product info available

-------------------------------------------------------------------------------------------------------

sudo pccardctl status
Socket 0:
5.0V 16-bit PC Card
Socket 1:
no card
------------------------------------------------------------------------------------------------------------

sudo cat /proc/iomem gives the foll:

00000000-00000fff : System RAM

00001000-00005fff : reserved

00006000-0008efff : System RAM

0008f000-0009ffff : reserved

000c0000-000dffff : pnp 00:01

000e0000-000fffff : reserved

00100000-ce5fafff : System RAM

01000000-01530f79 : Kernel code

01530f7a-018236ef : Kernel data

018d5000-019e4ccb : Kernel bss

ce5fb000-ce68ffff : ACPI Non-volatile Storage

ce690000-cf612fff : System RAM

cf613000-cf61efff : reserved

cf61f000-cf692fff : System RAM

cf693000-cf6e7fff : ACPI Non-volatile Storage

cf6e8000-cf6ebfff : System RAM

cf6ec000-cf6f0fff : ACPI Tables

cf6f1000-cf6f1fff : System RAM

cf6f2000-cf6fefff : ACPI Tables

cf6ff000-cf6fffff : System RAM

cf700000-cfffffff : reserved

d0000000-dfffffff : 0000:00:02.0

e0000000-e3ffffff : PCI Bus 0000:04

e0000000-e3ffffff : PCI CardBus 0000:05

e4000000-e80fffff : PCI Bus 0000:04

e4000000-e7ffffff : PCI CardBus 0000:05

e8000000-e8000fff : 0000:04:03.1

e8000000-e8000fff : yenta_socket

e8001000-e8001fff : 0000:04:03.0

e8001000-e8001fff : yenta_socket

e8100000-e81fffff : 0000:00:02.1

e8200000-e82fffff : 0000:00:02.0

e8300000-e831ffff : 0000:00:19.0

e8300000-e831ffff : e1000e

e8320000-e8320fff : 0000:00:19.0

e8320000-e8320fff : e1000e

e8321000-e83213ff : 0000:00:1d.7

e8321000-e83213ff : ehci_hcd

e8321400-e83217ff : 0000:00:1a.7

e8321400-e83217ff : ehci_hcd

e8321800-e83218ff : 0000:00:1f.3

e8322000-e8322fff : Intel Flush Page

e8400000-e84fffff : PCI Bus 0000:03

e8400000-e840ffff : 0000:03:00.0

ec000000-efffffff : PCI CardBus 0000:06

f0000000-f7ffffff : PCI MMCONFIG 0 [00-7f]

f0000000-f7ffffff : pnp 00:01

f8000000-fbffffff : PCI CardBus 0000:06

fec00000-fec00fff : IOAPIC 0

fed13000-fed13fff : pnp 00:01

fed14000-fed17fff : pnp 00:01

fed18000-fed18fff : pnp 00:01

fed19000-fed19fff : pnp 00:01

fed1c000-fed1ffff : pnp 00:01

fed20000-fed3ffff : pnp 00:01

fed45000-fed99fff : pnp 00:01

fee00000-fee00fff : Local APIC

fff00000-ffffffff : reserved

100000000-12fffffff : System RAM

-------------------------------------------------------------------------------------------------------
lspci -vvv

00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 
03)

Subsystem: Intel Corporation Device d701

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-

Latency: 0

Capabilities: [e0] Vendor Specific Information <?>

Kernel driver in use: agpgart-intel

Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation 82G35 Express 
Integrated Graphics Controller (rev 03)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 28

Region 0: Memory at e8200000 (32-bit, non-prefetchable) [size=1M]

Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]

Region 4: I/O ports at 3440 [size=8]

Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+

Address: fee0f00c Data: 41a1

Capabilities: [d0] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: i915

Kernel modules: i915

00:02.1 Display controller: Intel Corporation 82G35 Express Integrated 
Graphics Controller (rev 03)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=1M]

Capabilities: [d0] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network 
Connection (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 27

Region 0: Memory at e8300000 (32-bit, non-prefetchable) [size=128K]

Region 1: Memory at e8320000 (32-bit, non-prefetchable) [size=4K]

Region 2: I/O ports at 30c0 [size=32]

Capabilities: [c8] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable+

Address: 00000000fee0f00c Data: 41b1

Kernel driver in use: e1000e

Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 16

Region 4: I/O ports at 30a0 [size=32]

Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #5 (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 21

Region 4: I/O ports at 3080 [size=32]

Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #2 (rev 02) (prog-if 20)

Subsystem: Intel Corporation Device d701

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin C routed to IRQ 18

Region 0: Memory at e8321400 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port: BAR=1 offset=00a0

Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 
1 (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 
unlimited

ExtTag- RBE+ FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 
<4us

ClockPM- Suprise- LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- 
ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+

Slot # 1, PowerLimit 10.000000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+

Address: fee0f00c Data: 4161

Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel <?>

Capabilities: [180] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 
2 (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 
unlimited

ExtTag- RBE+ FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 
<4us

ClockPM- Suprise- LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- 
ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+

Slot # 2, PowerLimit 10.000000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+

Address: fee0f00c Data: 4169

Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel <?>

Capabilities: [180] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 
3 (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

I/O behind bridge: 00002000-00002fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: ffffffffe8400000-00000000e84fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 
unlimited

ExtTag- RBE+ FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 
<4us

ClockPM- Suprise- LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- 
ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+

Slot # 3, PowerLimit 10.000000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

Changed: MRL- PresDet+ LinkState+

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+

Address: fee0f00c Data: 4171

Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel <?>

Capabilities: [180] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 4: I/O ports at 3060 [size=32]

Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #2 (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 19

Region 4: I/O ports at 3040 [size=32]

Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #3 (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin C routed to IRQ 18

Region 4: I/O ports at 3020 [size=32]

Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #1 (rev 02) (prog-if 20)

Subsystem: Intel Corporation Device d701

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 0: Memory at e8321000 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port: BAR=1 offset=00a0

Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Bus: primary=00, secondary=04, subordinate=09, sec-latency=32

I/O behind bridge: 00001000-00001fff

Memory behind bridge: e4000000-e80fffff

Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff

Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Subsystem: Intel Corporation Device d701

00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface 
Controller (rev 02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Capabilities: [e0] Vendor Specific Information <?>

Kernel modules: iTCO_wdt

00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA 
IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 19

Region 0: I/O ports at 01f0 [size=8]

Region 1: I/O ports at 03f4 [size=1]

Region 2: I/O ports at 0170 [size=8]

Region 3: I/O ports at 0374 [size=1]

Region 4: I/O ports at 3410 [size=16]

Region 5: I/O ports at 3400 [size=16]

Capabilities: [70] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 
02)

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Interrupt: pin B routed to IRQ 10

Region 0: Memory at e8321800 (32-bit, non-prefetchable) [size=256]

Region 4: I/O ports at 3000 [size=32]

Kernel modules: i2c-i801

00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA 
IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])

Subsystem: Intel Corporation Device d701

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 19

Region 0: I/O ports at 3428 [size=8]

Region 1: I/O ports at 344c [size=4]

Region 2: I/O ports at 3420 [size=8]

Region 3: I/O ports at 3448 [size=4]

Region 4: I/O ports at 30f0 [size=16]

Region 5: I/O ports at 30e0 [size=16]

Capabilities: [70] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: ata_piix

03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 
(prog-if 85 [Master SecO PriO])

Subsystem: JMicron Technology Corp. JMB368 IDE controller

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 18

Region 0: I/O ports at 2018 [size=8]

Region 1: I/O ports at 2024 [size=4]

Region 2: I/O ports at 2010 [size=8]

Region 3: I/O ports at 2020 [size=4]

Region 4: I/O ports at 2000 [size=16]

Expansion ROM at e8400000 [disabled] [size=64K]

Capabilities: [68] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 
unlimited

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- 
ABWMgmt-

Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-

Address: 00000000 Data: 0000

Kernel driver in use: pata_jmicron

04:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)

Subsystem: Actiontec Electronics Inc Device 0293

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 168, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 17

Region 0: Memory at e8001000 (32-bit, non-prefetchable) [size=4K]

Bus: primary=04, secondary=05, subordinate=05, sec-latency=176

Memory window 0: e0000000-e3fff000 (prefetchable)

Memory window 1: e4000000-e7fff000

I/O window 0: 00001000-000010ff

I/O window 1: 00001400-000014ff

BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+

16-bit legacy interface ports at 0001

Kernel driver in use: yenta_cardbus

Kernel modules: yenta_socket

04:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)

Subsystem: Actiontec Electronics Inc Device 0293

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

Latency: 168, Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 18

Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=4K]

Bus: primary=04, secondary=06, subordinate=09, sec-latency=176

Memory window 0: ec000000-effff000 (prefetchable)

Memory window 1: f8000000-fbfff000

I/O window 0: 00001800-000018ff

I/O window 1: 00001c00-00001cff

BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+

16-bit legacy interface ports at 0001

Kernel driver in use: yenta_cardbus

Kernel modules: yenta_socket

More information about the linux-pcmcia mailing list