[RFC v3] PCMCIA locking updates for 2.6.34
Komuro
komurojun-mbn at nifty.com
Tue Jan 19 09:13:10 EST 2010
Hi,
> > The 3c589_cs and serial_cs is not loaded at dmesg below.
> > After re-plug, it works.
>
> Strange -- what does "lspcmcia -vvv" look like before and after re-plug?
lspcmcia -vvv is same between before and after re-plug.
By the way, the pcmcia-socket-startup is loaded after registering new device
in this case.
Is it correct?
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd2000000-0xd3eeffff: excluding
0xd2f70000-0xd315dfff 0xd3ee0000-0xd40cdfff
pcmcia 0.0: pcmcia: registering new device pcmcia0.0
pcmcia 0.1: pcmcia: registering new device pcmcia0.1
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding
0xc0000-0xc7fff 0xd0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:04:06.0)
Configuration: state: on ready: yes
Voltage: 5.0V Vcc: 5.0V Vpp: 0.0V
Available IRQs: 3, 5, 7, 10, 11
Available ioports: 0x00000100 - 0x000003af
0x000003e0 - 0x000004cf
0x000004d8 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
0x00001000 - 0x00001fff
Available iomem: 0x000c8000 - 0x000cffff
0x000d4000 - 0x000dffff
0xd2000000 - 0xd2f6ffff
0xd315e000 - 0xd3edffff
Socket 0 Device 0: [3c589_cs] (bus ID: 0.0)
Configuration: state: on
Product Name: 3Com Corporation 3C562D/3C563D EtherLink III LAN+Modem PC Card
Identification: manf_id: 0x0101 card_id: 0x0562
function: 6 (network)
prod_id(1): "3Com Corporation" (0xe1c0d2aa)
prod_id(2): "3C562D/3C563D" (0xaa0fba64)
prod_id(3): "EtherLink III" (0xc9a029c2)
prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
Socket 0 Device 1: [serial_cs] (bus ID: 0.1)
Configuration: state: on
Product Name: 3Com Corporation 3C562D/3C563D EtherLink III LAN+Modem PC Card
Identification: manf_id: 0x0101 card_id: 0x0562
function: 6 (network)
prod_id(1): "3Com Corporation" (0xe1c0d2aa)
prod_id(2): "3C562D/3C563D" (0xaa0fba64)
prod_id(3): "EtherLink III" (0xc9a029c2)
prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
More information about the linux-pcmcia
mailing list