[RFC v3] PCMCIA locking updates for 2.6.34

[Komuro]

Hi,
 
> >these were, again, very valuable debug hints. Based on those I've upgraded
> >my patches in the git repository. It'd be great if yo could re-run the test
> >once again, ad still with the debug patch applied.

(1) it seems the 3c562 multi_function card works now.


(2) but another 3com card 3CXEM556 (multi_function + cis override) does not work.
     This card works fine with kernel 2.6.33-rc8.


pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia 0.0: pcmcia: registering new device pcmcia0.0
pcmcia 0.0: firmware: requesting cis/3CXEM556.cis
pcmcia_socket pcmcia_socket0: Using replacement CIS
eth0: 3Com 3c589, io 0x300, irq 3, hw_addr 00:00:86:32:c1:b5
  8K FIFO split 5:3 Rx:Tx, auto xcvr
pcmcia 0.1: pcmcia: registering new device pcmcia0.1
0.1: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
udev: renamed network interface eth0 to eth8
eth8: command 0x5800 did not complete!
eth8: command 0x5800 did not complete!
eth8: command 0x5800 did not complete!
eth8: command 0x5800 did not complete!
....