[RFC v3] PCMCIA locking updates for 2.6.34

[Komuro]

Hi,

When the 3com card does not work,
the card_id and prod_id becomes the bogus value.

The card_id should be 0x0562.
the prod_id(2) should be "3C562D/3C563D"


[Socket 0 Bridge:   	[yenta_cardbus] 	(bus ID: 0000:04:06.0)
	Configuration:	state: on	ready: yes
			Voltage: 5.0V Vcc: 5.0V Vpp: 0.0V
Socket 0 Device 0:	[3c589_cs]	(bus ID: 0.0)
	Configuration:	state: on
	Product Name:   3Com Corporation 3C EtherLink III LAN+Modem PC Card 
	Identification:	manf_id: 0x0101	card_id: 0xffff
			function: 6 (network)
			prod_id(1): "3Com Corporation" (0xe1c0d2aa)
			prod_id(2): "3C" (0x1bbe751a)
			prod_id(3): "EtherLink III" (0xc9a029c2)
			prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
Socket 0 Device 1:	[serial_cs]		(bus ID: 0.1)
	Configuration:	state: on
	Product Name:   3Com Corporation 3C EtherLink III LAN+Modem PC Card 
	Identification:	manf_id: 0x0101	card_id: 0xffff
			function: 6 (network)
			prod_id(1): "3Com Corporation" (0xe1c0d2aa)
			prod_id(2): "3C" (0x1bbe751a)
			prod_id(3): "EtherLink III" (0xc9a029c2)
			prod_id(4): "LAN+Modem PC Card" (0x32d830f4)