[PATCH 10/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless)
Dominik Brodowski
linux at dominikbrodowski.net
Sat Oct 24 15:43:00 EDT 2009
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-wireless at vger.kernel.org
CC: netdev at vger.kernel.org
Signed-off-by: Dominik Brodowski <linux at dominikbrodowski.net>
---
drivers/net/wireless/airo_cs.c | 48 +++++----------
drivers/net/wireless/atmel_cs.c | 46 +++++----------
drivers/net/wireless/hostap/hostap_cs.c | 23 +++-----
drivers/net/wireless/netwave_cs.c | 88 +++++++++++----------------
drivers/net/wireless/orinoco/orinoco_cs.c | 27 +++-----
drivers/net/wireless/orinoco/spectrum_cs.c | 54 +++++++++---------
drivers/net/wireless/wavelan_cs.c | 24 --------
drivers/net/wireless/wl3501_cs.c | 67 ++++++++--------------
8 files changed, 136 insertions(+), 241 deletions(-)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d0593ed..a1b84fc 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -43,21 +43,6 @@
#include "airo.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -145,7 +130,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "airo_attach()\n");
+ dev_dbg(&p_dev->dev, "airo_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -184,7 +169,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
static void airo_detach(struct pcmcia_device *link)
{
- DEBUG(0, "airo_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_detach\n");
airo_release(link);
@@ -204,9 +189,6 @@ static void airo_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int airo_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -291,11 +273,11 @@ static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
win_req_t *req;
- int last_fn, last_ret;
+ int ret;
dev = link->priv;
- DEBUG(0, "airo_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_config\n");
req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
if (!req)
@@ -315,8 +297,8 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
- if (last_ret)
+ ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (ret)
goto failed;
/*
@@ -324,21 +306,25 @@ static int airo_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq.AssignedIRQ,
link->io.BasePort1, 1, &handle_to_dev(link));
if (!((local_info_t *)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@@ -368,8 +354,6 @@ static int airo_config(struct pcmcia_device *link)
kfree(req);
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
airo_release(link);
kfree(req);
@@ -386,7 +370,7 @@ static int airo_config(struct pcmcia_device *link)
static void airo_release(struct pcmcia_device *link)
{
- DEBUG(0, "airo_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_release\n");
pcmcia_disable_device(link);
}
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ddaa859..7838572 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -55,22 +55,6 @@
#include "atmel.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -155,7 +139,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "atmel_attach()\n");
+ dev_dbg(&p_dev->dev, "atmel_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -194,7 +178,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
static void atmel_detach(struct pcmcia_device *link)
{
- DEBUG(0, "atmel_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_detach\n");
atmel_release(link);
@@ -209,9 +193,6 @@ static void atmel_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -275,13 +256,13 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
static int atmel_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int last_fn, last_ret;
+ int ret;
struct pcmcia_device_id *did;
dev = link->priv;
did = dev_get_drvdata(&handle_to_dev(link));
- DEBUG(0, "atmel_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_config\n");
/*
In this loop, we scan the CIS for configuration table entries,
@@ -303,20 +284,25 @@ static int atmel_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
"atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
- goto cs_failed;
+ goto failed;
}
((local_info_t*)link->priv)->eth_dev =
@@ -327,7 +313,7 @@ static int atmel_config(struct pcmcia_device *link)
card_present,
link);
if (!((local_info_t*)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
@@ -340,8 +326,6 @@ static int atmel_config(struct pcmcia_device *link)
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
atmel_release(link);
return -ENODEV;
@@ -359,7 +343,7 @@ static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
- DEBUG(0, "atmel_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_release\n");
if (dev)
stop_atmel_card(dev);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 31b60dd..ca3ab84 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -510,10 +510,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
@@ -605,7 +601,6 @@ static int prism2_config(struct pcmcia_device *link)
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- int last_fn, last_ret;
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -617,13 +612,12 @@ static int prism2_config(struct pcmcia_device *link)
}
/* Look for an appropriate configuration table entry in the CIS */
- last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -652,8 +646,9 @@ static int prism2_config(struct pcmcia_device *link)
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = prism2_interrupt;
link->irq.Instance = dev;
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
}
/*
@@ -661,8 +656,9 @@ static int prism2_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -695,9 +691,6 @@ static int prism2_config(struct pcmcia_device *link)
}
return ret;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
kfree(hw_priv);
prism2_release((u_long)link);
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 9498b46..cbd85de 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -145,23 +145,6 @@ static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
static const unsigned int txConfKey = 0x02; /* Scramble data packets */
static const unsigned int txConfLoop = 0x01; /* Loopback mode */
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -383,7 +366,7 @@ static int netwave_probe(struct pcmcia_device *link)
struct net_device *dev;
netwave_private *priv;
- DEBUG(0, "netwave_attach()\n");
+ dev_dbg(&link->dev, "netwave_attach()\n");
/* Initialize the struct pcmcia_device structure */
dev = alloc_etherdev(sizeof(netwave_private));
@@ -438,7 +421,7 @@ static void netwave_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "netwave_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_detach\n");
netwave_release(link);
@@ -725,18 +708,15 @@ static const struct iw_handler_def netwave_handler_def =
*
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int netwave_pcmcia_config(struct pcmcia_device *link) {
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- int i, j, last_ret, last_fn;
+ int i, j, ret;
win_req_t req;
memreq_t mem;
u_char __iomem *ramBase = NULL;
- DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_pcmcia_config\n");
/*
* Try allocating IO ports. This tries a few fixed addresses.
@@ -749,22 +729,24 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/*
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*
* Allocate a 32K memory window. Note that the struct pcmcia_device
@@ -772,14 +754,18 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
* device needs several windows, you'll need to keep track of
* the handles in your private data structure, dev->priv.
*/
- DEBUG(1, "Setting mem speed of %d\n", mem_speed);
+ dev_dbg(&link->dev, "Setting mem speed of %d\n", mem_speed);
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
req.Base = 0; req.Size = 0x8000;
req.AccessSpeed = mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x20000; mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
/* Store base address of the common window frame */
ramBase = ioremap(req.Base, 0x8000);
@@ -818,8 +804,6 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
get_uint16(ramBase + NETWAVE_EREG_ARW+2));
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
netwave_release(link);
return -ENODEV;
@@ -837,7 +821,7 @@ static void netwave_release(struct pcmcia_device *link)
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- DEBUG(0, "netwave_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_release\n");
pcmcia_disable_device(link);
if (link->win)
@@ -892,7 +876,7 @@ static void netwave_reset(struct net_device *dev) {
u_char __iomem *ramBase = priv->ramBase;
unsigned int iobase = dev->base_addr;
- DEBUG(0, "netwave_reset: Done with hardware reset\n");
+ pr_debug("netwave_reset: Done with hardware reset\n");
priv->timeoutCounter = 0;
@@ -988,7 +972,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
dev->stats.tx_bytes += len;
- DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+ pr_debug("Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
readb(ramBase + NETWAVE_EREG_SPCQ),
readb(ramBase + NETWAVE_EREG_SPU),
readb(ramBase + NETWAVE_EREG_LIF),
@@ -1000,7 +984,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
- DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
+ pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n",
TxFreeList, MaxData, DataOffset);
/* Copy packet to the adapter fragment buffers */
@@ -1088,7 +1072,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
status = inb(iobase + NETWAVE_REG_ASR);
if (!pcmcia_dev_present(link)) {
- DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
+ pr_debug("netwave_interrupt: Interrupt with status 0x%x "
"from removed or suspended card!\n", status);
break;
}
@@ -1132,7 +1116,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
int txStatus;
txStatus = readb(ramBase + NETWAVE_EREG_TSER);
- DEBUG(3, "Transmit done. TSER = %x id %x\n",
+ pr_debug("Transmit done. TSER = %x id %x\n",
txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
if (txStatus & 0x20) {
@@ -1156,7 +1140,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
* TxGU and TxNOAP is set. (Those are the only ones
* to set TxErr).
*/
- DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
+ pr_debug("netwave_interrupt: TxDN with error status %x\n",
txStatus);
/* Clear out TxGU, TxNOAP, TxErr and TxTrys */
@@ -1164,7 +1148,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
++dev->stats.tx_errors;
}
- DEBUG(3, "New status is TSER %x ASR %x\n",
+ pr_debug("New status is TSER %x ASR %x\n",
readb(ramBase + NETWAVE_EREG_TSER),
inb(iobase + NETWAVE_REG_ASR));
@@ -1172,7 +1156,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
}
/* TxBA, this would trigger on all error packets received */
/* if (status & 0x01) {
- DEBUG(4, "Transmit buffers available, %x\n", status);
+ pr_debug("Transmit buffers available, %x\n", status);
}
*/
}
@@ -1190,7 +1174,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
*/
static void netwave_watchdog(struct net_device *dev) {
- DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+ pr_debug("%s: netwave_watchdog: watchdog timer expired\n", dev->name);
netwave_reset(dev);
dev->trans_start = jiffies;
netif_wake_queue(dev);
@@ -1211,7 +1195,7 @@ static int netwave_rx(struct net_device *dev)
int i;
u_char *ptr;
- DEBUG(3, "xinw_rx: Receiving ... \n");
+ pr_debug("xinw_rx: Receiving ... \n");
/* Receive max 10 packets for now. */
for (i = 0; i < 10; i++) {
@@ -1237,7 +1221,7 @@ static int netwave_rx(struct net_device *dev)
skb = dev_alloc_skb(rcvLen+5);
if (skb == NULL) {
- DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
+ pr_debug("netwave_rx: Could not allocate an sk_buff of "
"length %d\n", rcvLen);
++dev->stats.rx_dropped;
/* Tell the adapter to skip the packet */
@@ -1279,7 +1263,7 @@ static int netwave_rx(struct net_device *dev)
wait_WOC(iobase);
writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- DEBUG(3, "Packet reception ok\n");
+ pr_debug("Packet reception ok\n");
}
return 0;
}
@@ -1288,7 +1272,7 @@ static int netwave_open(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_open: starting.\n");
+ dev_dbg(&link->dev, "netwave_open: starting.\n");
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -1305,7 +1289,7 @@ static int netwave_close(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_close: finishing.\n");
+ dev_dbg(&link->dev, "netwave_close: finishing.\n");
link->open--;
netif_stop_queue(dev);
@@ -1358,11 +1342,11 @@ static void set_multicast_list(struct net_device *dev)
u_char rcvMode = 0;
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- static int old;
+ {
+ xstatic int old;
if (old != dev->mc_count) {
old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ pr_debug("%s: setting Rx mode to %d addresses.\n",
dev->name, dev->mc_count);
}
}
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 38c1c9d..da626ec 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -160,12 +160,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
* device available to the system.
*/
-#define CS_CHECK(fn, ret) do { \
- last_fn = (fn); \
- if ((last_ret = (ret)) != 0) \
- goto cs_failed; \
-} while (0)
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -240,7 +234,7 @@ orinoco_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -257,13 +251,12 @@ orinoco_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -272,14 +265,16 @@ orinoco_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -288,8 +283,9 @@ orinoco_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -315,9 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
orinoco_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index c361310..700010e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -73,9 +73,6 @@ static void spectrum_cs_release(struct pcmcia_device *link);
#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/*
* Reset the card using configuration registers COR and CCSR.
* If IDLE is 1, stop the firmware, so that it can be safely rewritten.
@@ -83,7 +80,7 @@ static void spectrum_cs_release(struct pcmcia_device *link);
static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
- int last_ret, last_fn;
+ int ret;
conf_reg_t reg;
u_int save_cor;
@@ -95,23 +92,26 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Function = 0;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
save_cor = reg.Value;
/* Soft-Reset card */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor | COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
/* Read CCSR */
reg.Action = CS_READ;
reg.Offset = CISREG_CCSR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
/*
* Start or stop the firmware. Memory width bit should be
@@ -120,21 +120,22 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Action = CS_WRITE;
reg.Offset = CISREG_CCSR;
reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
/* Restore original COR configuration index */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor & ~COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
+failed:
return -ENODEV;
}
@@ -307,7 +308,7 @@ spectrum_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -324,13 +325,12 @@ spectrum_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -339,14 +339,16 @@ spectrum_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -355,8 +357,9 @@ spectrum_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -386,9 +389,6 @@ spectrum_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
spectrum_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 431a20e..2fad4ac 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3656,10 +3656,7 @@ wv_pcmcia_reset(struct net_device * dev)
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
@@ -3670,19 +3667,13 @@ wv_pcmcia_reset(struct net_device * dev)
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
@@ -3857,10 +3848,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
{
i = pcmcia_request_io(link, &link->io);
if (i != 0)
- {
- cs_error(link, RequestIO, i);
break;
- }
/*
* Now allocate an interrupt line. Note that this does not
@@ -3868,10 +3856,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
- {
- cs_error(link, RequestIRQ, i);
break;
- }
/*
* This actually configures the PCMCIA socket -- setting up
@@ -3880,10 +3865,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
- {
- cs_error(link, RequestConfiguration, i);
break;
- }
/*
* Allocate a small memory window. Note that the struct pcmcia_device
@@ -3896,10 +3878,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
if (i != 0)
- {
- cs_error(link, RequestWindow, i);
break;
- }
lp->mem = ioremap(req.Base, req.Size);
dev->mem_start = (u_long)lp->mem;
@@ -3908,10 +3887,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
if (i != 0)
- {
- cs_error(link, MapMemPage, i);
break;
- }
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 4f1e0cf..7e8e269 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
/* For rough constant delay */
#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out. If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
- { if (pc_debug > (n)) \
- printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
int matchflag = 0;
struct wl3501_scan_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
- dprintk(3, "success");
+ pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
(sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
- dprintk(3, "timeout");
+ pr_debug("timeout");
this->join_sta_bss = 0;
for (i = this->join_sta_bss; i < this->bss_cnt; i++)
if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this)
.timeout = 1000,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this)
.cap_info = this->cap_info,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_join_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
{
struct wl3501_md_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
wl3501_free_tx_buffer(this, sig.data);
if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
u16 addr, void *sig, int size)
{
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
sizeof(this->sig_get_confirm));
wake_up(&this->wait);
@@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
{
struct wl3501_start_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_assoc_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
{
struct wl3501_auth_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev)
u8 sig_id;
struct wl3501_card *this = netdev_priv(dev);
- dprintk(3, "entry");
+ pr_debug("entry");
loop:
morepkts = 0;
if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev)
wl3501_ack_interrupt(this);
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
- dprintk(1, "%s: device reset", dev->name);
+ pr_debug("%s: device reset", dev->name);
rc = 0;
out:
return rc;
@@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev)
link->open++;
/* Initial WL3501 firmware */
- dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+ pr_debug("%s: Initialize WL3501 firmware...", dev->name);
if (wl3501_init_firmware(this))
goto fail;
/* Initial device variables */
@@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev)
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
rc = 0;
- dprintk(1, "%s: WL3501 opened", dev->name);
+ pr_debug("%s: WL3501 opened", dev->name);
printk(KERN_INFO "%s: Card Name: %s\n"
"%s: Firmware Date: %s\n",
dev->name, this->card_name,
@@ -1945,9 +1929,6 @@ out_link:
return -ENOMEM;
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/**
* wl3501_config - configure the PCMCIA socket and make eth device available
* @link - FILL_IN
@@ -1959,7 +1940,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- int i = 0, j, last_fn, last_ret;
+ int i = 0, j, ret;
struct wl3501_card *this;
/* Try allocating IO ports. This tries a few fixed addresses. If you
@@ -1975,20 +1956,22 @@ static int wl3501_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -2041,8 +2024,6 @@ static int wl3501_config(struct pcmcia_device *link)
netif_start_queue(dev);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
wl3501_release(link);
return -ENODEV;
--
1.6.0.4
More information about the linux-pcmcia
mailing list