PCMCIA bring up fails on ide_register()

Kevin Wu kwu at Brocade.com
Fri Oct 2 14:10:00 EDT 2009


Dear Linux PCMCIA experts,

I am trying to bring up PCMCIA code in Linux, but I meet the following error. Could you please help me take a look?

I have my Linux boot up logged messages as attachment.


The current error:
ide-cs: ide_register() at 0x  0 & 0x  e, irq 94 failed

My Linux code is based on revision 2.6.14.2; there are two slots for PCMCIA card, slot 0 and slot 1. Now I have one ATA Flash card in slot 1.

Here is our major PCMCIA controller hardware information:
1)       CPU: MPC7447A
2)       PCI Bridge: Marvell Discovery III MV64460
3)       PCMCIA (CARDBUS) controller: TI PCI1520
4)       ATA/IDE Card: ATA FLASH STORAGE128MB SLATA128MM1CU STEC

Thanks,
Kevin Wu
Phone: 408-333-4052
Email: kwu at brocade.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20091002/11b5fbb2/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: XtermLog.PEiDq
Type: application/octet-stream
Size: 19299 bytes
Desc: XtermLog.PEiDq
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20091002/11b5fbb2/attachment-0001.obj>


More information about the linux-pcmcia mailing list