[ANOTHER BUG? kernel 2.6.32] 3com 3c562 card can't access CIS
Komuro
komurojun-mbn at nifty.com
Wed Dec 30 03:24:43 EST 2009
Hi,
>
>what's the difference between "lspcmcia -vvv" when the problem exists, and
>when the problem does not appear? Can you read out the CIS via sysfs even
>when the problem exists, and is it the same as when the problem does not
>appear?
The "lspcmcia -vvv" is same between the problem appear and problem does
not appear.
Actually, this problem appear when I connect the 3com card and boot linux.
Even if the problem appear , after replugging the card, it works well.
I can read the CIS from /sys/class/pcmcia_socket/pcmcia_socket0/cis.
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:04:06.0)
Configuration: state: on ready: yes
Voltage: 5.0V Vcc: 5.0V Vpp: 0.0V
Available IRQs: 3, 5, 7, 10, 11
Available ioports: 0x00000100 - 0x000003af
0x000003e0 - 0x000004cf
0x000004d8 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
0x00001000 - 0x00001fff
Available iomem: 0x000c0000 - 0x000fffff
0xd2000000 - 0xd2e6ffff
0xd3080000 - 0xd3eeffff
Socket 0 Device 0: [3c589_cs] (bus ID: 0.0)
Configuration: state: on
Product Name: 3Com Corporation 3C562D/3C563D EtherLink III LAN+Modem PC Car
d
Identification: manf_id: 0x0101 card_id: 0x0562
function: 6 (network)
prod_id(1): "3Com Corporation" (0xe1c0d2aa)
prod_id(2): "3C562D/3C563D" (0xaa0fba64)
prod_id(3): "EtherLink III" (0xc9a029c2)
prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
Socket 0 Device 1: [serial_cs] (bus ID: 0.1)
Configuration: state: on
Product Name: 3Com Corporation 3C562D/3C563D EtherLink III LAN+Modem PC Car
d
Identification: manf_id: 0x0101 card_id: 0x0562
function: 6 (network)
prod_id(1): "3Com Corporation" (0xe1c0d2aa)
prod_id(2): "3C562D/3C563D" (0xaa0fba64)
prod_id(3): "EtherLink III" (0xc9a029c2)
prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
More information about the linux-pcmcia
mailing list