[PATCH 19/49] pcmcia: remove remaining in-kernel pcmcia_get_configuration_info() users

[Dominik Brodowski]

Remove the three remaining pcmcia_get_configuration_info() users:
- pcmciamtd is marked broken anyway.
- serial_cs.c can access the relevant structs directly
- ipwireless didn't use the output

CC: linux-serial at vger.kernel.org
CC: Russell King <rmk+kernel at arm.linux.org.uk>
Acked-by: David Sterba <dsterba at suse.cz>
Signed-off-by: Dominik Brodowski <linux at dominikbrodowski.net>
---
 drivers/char/pcmcia/ipwireless/main.c |   10 ----------
 drivers/mtd/maps/pcmciamtd.c          |   12 +-----------
 drivers/serial/serial_cs.c            |   18 +++++++++---------
 3 files changed, 10 insertions(+), 30 deletions(-)

diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 5eca7a9..1f520e5 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -83,7 +83,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
 {
 	struct pcmcia_device *link = ipw->link;
 	int ret;
-	config_info_t conf;
 	tuple_t tuple;
 	unsigned short buf[64];
 	cisparse_t parse;
@@ -297,15 +296,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		goto exit3;
 	}
 
-	/* Look up current Vcc */
-
-	ret = pcmcia_get_configuration_info(link, &conf);
-
-	if (ret != CS_SUCCESS) {
-		cs_error(link, GetConfigurationInfo, ret);
-		goto exit4;
-	}
-
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
 			ipw->is_v2_card ? "V2/V3" : "V1");
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 90924fb..8861ca4 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -493,7 +493,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	int last_ret = 0, last_fn = 0;
 	int ret;
 	int i;
-	config_info_t t;
 	static char *probes[] = { "jedec_probe", "cfi_probe" };
 	int new_name = 0;
 
@@ -571,10 +570,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
 	dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
 
-	DEBUG(2, "Getting configuration");
-	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &t));
-	DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
-	dev->vpp = (vpp) ? vpp : t.Vpp1;
+	dev->vpp = (vpp) ? vpp : link->socket.socket.Vpp;
 	link->conf.Attributes = 0;
 	if(setvpp == 2) {
 		link->conf.Vpp = dev->vpp;
@@ -583,13 +579,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	}
 
 	link->conf.IntType = INT_MEMORY;
-	link->conf.ConfigBase = t.ConfigBase;
-	link->conf.Status = t.Status;
-	link->conf.Pin = t.Pin;
-	link->conf.Copy = t.Copy;
-	link->conf.ExtStatus = t.ExtStatus;
 	link->conf.ConfigIndex = 0;
-	link->conf.Present = t.Present;
 	DEBUG(2, "Setting Configuration");
 	ret = pcmcia_request_configuration(link, &link->conf);
 	if(ret != CS_SUCCESS) {
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7e00e67..344e570 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -488,23 +488,23 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 static int simple_config(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
-	config_info_t config;
-	int i, try;
+	int i = -ENODEV, try;
 
 	/* If the card is already configured, look up the port and irq */
-	i = pcmcia_get_configuration_info(link, &config);
-	if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
+	if (link->function_config) {
 		unsigned int port = 0;
-		if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
-			port = config.BasePort2;
+		if ((link->io.BasePort2 != 0) &&
+		    (link->io.NumPorts2 == 8)) {
+			port = link->io.BasePort2;
 			info->slave = 1;
 		} else if ((info->manfid == MANFID_OSITECH) &&
-			   (config.NumPorts1 == 0x40)) {
-			port = config.BasePort1 + 0x28;
+			   (link->io.NumPorts1 == 0x40)) {
+			port = link->io.BasePort1 + 0x28;
 			info->slave = 1;
 		}
 		if (info->slave) {
-			return setup_serial(link, info, port, config.AssignedIRQ);
+			return setup_serial(link, info, port,
+					    link->irq.AssignedIRQ);
 		}
 	}
 
-- 
1.5.4.3