[PATCH] pcmcia: ensure correct logging in do_io_probe [v2]

[Frans Pop]

I've added parens around the conditions. Maybe not strictly needed,
but better readable and consistent with similar usage in cs.c.

Cheers,
FJP

---
From: Frans Pop <elendil at planet.nl>

pcmcia: ensure correct logging in do_io_probe
    
During early probing of the parent PCI bridge I/O window no socket
has been allocated yet.
In that case print &s->cb_dev->dev instead of &s->dev as device.
    
Also properly close previous dev_printk if kzalloc fails.

Signed-off-by: Frans Pop <elendil at planet.nl>
CC: Dominik Brodowski <linux at dominikbrodowski.net>

diff --git a/drivers/pcmcia/rsrc_nonstatic.c 
b/drivers/pcmcia/rsrc_nonstatic.c
index 17f4ecf..2a6a3d1 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -200,14 +200,17 @@ static void do_io_probe(struct pcmcia_socket *s, 
unsigned int base,
     int any;
     u_char *b, hole, most;
 
-    dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
-	       base, base+num-1);
+    dev_printk(KERN_INFO,
+	       (s->state & SOCKET_PRESENT) ? &s->dev : &s->cb_dev->dev,
+	       "cs: IO port probe %#x-%#x:", base, base+num-1);
 
     /* First, what does a floating port look like? */
     b = kzalloc(256, GFP_KERNEL);
     if (!b) {
-	    dev_printk(KERN_ERR, &s->dev,
-		   "do_io_probe: unable to kmalloc 256 bytes");
+	    printk("\n");
+	    dev_printk(KERN_ERR,
+		   (s->state & SOCKET_PRESENT) ? &s->dev : &s->cb_dev->dev,
+		   "cs: do_io_probe: unable to kmalloc 256 bytes");
             return;
     }
     for (i = base, most = 0; i < base+num; i += 8) {