bugreport : pata_pcmcia with Sandisk Extreme III 8GB

[Kristoffer Ericson]

Greetings,

Ive added the id123 strings for a Sandisk Extreme III 8GB. I get this when using pcmcia->CF adapter.

(dmesg)
pcmcia: registering new device pcmcia1.0
scsi3 : pata_pcmcia
ata4: PATA max PIO0 cmd 0x100 ctl 0x10e irq 9
ata4.00: CFA: SanDisk SDCFX3-8192, HDX 4.31, max PIO4
ata4.00: 16007040 sectors, multi 0: LBA
ata4.00: configured for PIO0
ata4.00: configured for PIO0
ata4: EH complete
scsi 3:0:0:0: Direct-Access     ATA      SanDisk SDCFX3-8 HDX  PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 16007040 512-byte hardware sectors (8196 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 16007040 512-byte hardware sectors (8196 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
pcmcia: registering new device pcmcia1.1
1.1: GetNextTuple: No more items
pata_pcmcia: probe of 1.1 failed with error -12

I then do mknod to create sdb1. Nothing works. If i try to cfdisk or mount it just freezes and on ejection I get this.

(dmesg)
pccard: card ejected from slot 0
ata5.00: disabled
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 62
printk: 20 messages suppressed.
Buffer I/O error on device sdb1, logical block 0
Buffer I/O error on device sdb1, logical block 1
Buffer I/O error on device sdb1, logical block 2
Buffer I/O error on device sdb1, logical block 3
Buffer I/O error on device sdb1, logical block 4
Buffer I/O error on device sdb1, logical block 5
Buffer I/O error on device sdb1, logical block 6
Buffer I/O error on device sdb1, logical block 7
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 15231106
Buffer I/O error on device sdb2, logical block 0
Buffer I/O error on device sdb2, logical block 1
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 15230910
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 15231106
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 62
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 15230910
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sdb, sector 62
sd 4:0:0:0: [sdb] READ CAPACITY failed
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 4:0:0:0: [sdb] Sense not available.
sd 4:0:0:0: [sdb] Write Protect is on
sd 4:0:0:0: [sdb] Mode Sense: fe fb fe fb
sd 4:0:0:0: [sdb] Asking for cache data failed
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Stopping disk
sd 4:0:0:0: [sdb] START_STOP FAILED
sd 4:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00

Any input on this?
-- 
Kristoffer Ericson <Kristoffer.Ericson at Gmail.com>