Cardbus/Yenta/PCI 2.6.22 help

Komuro komurojun-mbn at nifty.com
Sun Feb 10 09:09:04 EST 2008


Please try kernel 2.6.24


Best Regards
komuro

>
>Hi,
>
>I have a problem getting a PCI to Cardbus adapter to work on a dell
>1550 server. I have been truying for days to get this going but
>I cannot figure out what is wrong. As far as I understand, all
>should be ok in terms ok irqs, and resource windows...
>This machine has 2G memory and 2 CPUs.
>Running 2.6.22-14-generic.
>
>But upon card insertion... nil happens. PCI slot, adapter
>and cards are ganuaranteed healthy.
>
>Yenta reports a troublesome (?) socket status:
>
>[  170.575520] Yenta: CardBus bridge found at 0000:02:06.0 [0000:0000]
>[  170.707652] Yenta: ISA IRQ mask 0x0000, PCI irq 16
>[  170.707708] Socket status: ffffffff
>
>
>Thanks for any assistance, I am running out of steam here!
>Attached lspci, dmesg,
>
>Christophe
>
>
>xtof at rover1:~$ lspci
>00:00.0 Host bridge: Broadcom CNB20HE Host Bridge (rev 23)
>00:00.1 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
>00:00.2 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
>00:00.3 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
>00:01.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 
>100 (rev 08)
>00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
>00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
>00:0f.1 IDE interface: Broadcom OSB4 IDE Controller
>02:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
>02:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
>02:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
>
>
>
>xtof at rover1:~$ lspci -v
>00:00.0 Host bridge: Broadcom CNB20HE Host Bridge (rev 23)
>        Flags: fast devsel
>
>00:00.1 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
>        Flags: bus master, medium devsel, latency 32
>
>00:00.2 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
>        Flags: medium devsel
>
>00:00.3 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
>        Flags: medium devsel
>
>00:01.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 
>100 (rev 08)
>        Subsystem: Dell Unknown device 00da
>        Flags: bus master, medium devsel, latency 32, IRQ 17
>        Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
>        I/O ports at ecc0 [size=64]
>        Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
>        Capabilities: <access denied>
>
>00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 
>(prog-if 00 [VGA])
>        Subsystem: Dell Unknown device 00df
>        Flags: bus master, VGA palette snoop, stepping, medium devsel, 
>latency 32
>        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>        I/O ports at e800 [size=256]
>        Memory at fe1fe000 (32-bit, non-prefetchable) [size=4K]
>        [virtual] Expansion ROM at 80000000 [disabled] [size=128K]
>        Capabilities: <access denied>
>
>00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
>        Subsystem: Broadcom OSB4 South Bridge
>        Flags: bus master, medium devsel, latency 0
>
>00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master 
>SecP PriP])
>        Flags: bus master, medium devsel, latency 64
>        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
>[disabled] [size=8]
>        [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
>[disabled] [size=1]
>        [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
>[disabled] [size=8]
>        [virtual] Memory at 00000370 (type 3, non-prefetchable) 
>[disabled] [size=1]
>        I/O ports at 08b0 [size=16]
>
>02:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
>        Subsystem: Dell Unknown device 00df
>        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
>        BIST result: 00
>        I/O ports at dc00 [disabled] [size=256]
>        Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
>        Expansion ROM at feb00000 [disabled] [size=128K]
>        Capabilities: <access denied>
>
>02:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
>        Subsystem: Dell Unknown device 00df
>        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
>        BIST result: 00
>        I/O ports at d800 [disabled] [size=256]
>        Memory at feafe000 (64-bit, non-prefetchable) [size=4K]
>        Expansion ROM at 80020000 [disabled] [size=128K]
>        Capabilities: <access denied>
>
>02:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
>        Flags: bus master, medium devsel, latency 168, IRQ 16
>        Memory at 80040000 (32-bit, non-prefetchable) [size=4K]
>        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>        Memory window 0: 84000000-87fff000 (prefetchable)
>        Memory window 1: 88000000-8bfff000
>        I/O window 0: 00001000-000010ff
>        I/O window 1: 00001400-000014ff
>        16-bit legacy interface ports at 0001
>




More information about the linux-pcmcia mailing list