Unable to access PCMCIA with O2 Micro OZ711MP1/MS1

Mon Feb 4 11:28:58 EST 2008

On Mon, 04 Feb 2008 15:01:44 +0100
"Mader, Alexander (N-MSR)" <Alexander.Mader at niles.de> wrote:

> Hello,
> 
> I hope I am contacting the appropriate list for this. Please, let me 
> know if I should search somewhere else.
> 
> There seems to be a problem accessing PCMCIA cards with O2 Micro 
> OZ711MP1/MS1 Controller and it would be really great if I could get some 
> hints from this list to get around it.
> 
> On a Fujitsu Siemens Celsius H240 a 2.6.22-3-amd64 kernel from Debian 
> testing is in use. PCMCIA utilities for Linux 2.6 version 014-4 are 
> installed. I concatenated the the output of lspci and lshal below.
> 
> When I insert a CardBus adapter, for instance a CNET CNF401 fast 
> ethernet, everything works fine and the adapter becomes available to the 
> system -- in this example the NIC with working LAN access. The lspci and 
> lshal output then reflects the new hardware.
> 
> When I insert a PCMCIA adapter, for instance a 3com 3CCE589EC or an 
> compact flash adapter, almost nothing happens: In the case of the 3com I 
> just get (dmesg):

Just out of interest, have you tried any other besides 3com 3CCE589EC?

> 
> 	pccard: PCMCIA card inserted into slot 0
> 
> In the case of the compact flash adapter at the first insert dmesg gives:
> 
> pccard: PCMCIA card inserted into slot 0
> cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
> cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
> cs: memory probe 0x88000000-0x8fffffff: excluding 0x88000000-0x8fffffff
> cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
> cs: memory probe 0xf0300000-0xf03fffff: excluding 0xf0300000-0xf03fffff
> 
> Later dmesg issues just "pccard: PCMCIA card inserted into slot 0"
> 
> In both PCMCIA examples the lshal output doesn't change, in the lspci 
> output the original line:
> 
> 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
> 	PostWrite+                                  ^^^^^^
> 
> changes to:
> 
> 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
> 	PostWrite+                                  ^^^^^^
> 
> In the case of the compact flash neither "modprobe ide_cs" nor "modprobe 
> pata_pcmcia" yield anything -- not even in dmesg.
> 
> As I do not want to access a SmartCard I did not try the o2scr driver 
> from gna.org/projects/o2scr.
> 
> Now the command output will follow, but before that:
> 
> Best regards, Alexander.
> ========================================================================
> 
> According to lspci -vv the card reader is:
> 
> 8< ------------------------------------------------------------------ >8
> 08:03.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus 
> Controller (rev 21)
> 	Subsystem: Fujitsu Limited. Unknown device 131e
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping+ SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
> 	Latency: 168
> 	Interrupt: pin A routed to IRQ 16
> 	Region 0: Memory at f0303000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
> 	Memory window 0: 88000000-8bfff000 (prefetchable)
> 	Memory window 1: 94000000-97fff000
> 	I/O window 0: 00004000-000040ff
> 	I/O window 1: 00004400-000044ff
> 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> 	16-bit legacy interface ports at 0001
> 	Kernel driver in use: yenta_cardbus
> 	Kernel modules: yenta_socket
> 
> 08:03.1 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus 
> Controller (rev 21)
> 	Subsystem: Fujitsu Limited. Unknown device 131e
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping+ SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
> 	Latency: 168
> 	Interrupt: pin A routed to IRQ 16
> 	Region 0: Memory at f0304000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=08, secondary=0d, subordinate=10, sec-latency=176
> 	Memory window 0: 8c000000-8ffff000 (prefetchable)
> 	Memory window 1: 98000000-9bfff000
> 	I/O window 0: 00004800-000048ff
> 	I/O window 1: 00004c00-00004cff
> 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> 	16-bit legacy interface ports at 0001
> 	Kernel driver in use: yenta_cardbus
> 	Kernel modules: yenta_socket
> 
> 8< ------------------------------------------------------------------ >8
> 
> According to lshal -vv we have:
> 
> 8< ------------------------------------------------------------------ >8
> udi = '/org/freedesktop/Hal/devices/pci_1217_7134_0'
>    info.bus = 'pci'  (string)
>    info.linux.driver = 'yenta_cardbus'  (string)
>    info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
>    info.product = 'OZ711MP1/MS1 MemoryCardBus Controller'  (string)
>    info.subsystem = 'pci'  (string)
>    info.udi = '/org/freedesktop/Hal/devices/pci_1217_7134_0'  (string)
>    info.vendor = 'O2 Micro, Inc.'  (string)
>    linux.hotplug_type = 2  (0x2)  (int)
>    linux.subsystem = 'pci'  (string)
>    linux.sysfs_path = 
> '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.1'  (string)
>    pci.device_class = 6  (0x6)  (int)
>    pci.device_protocol = 0  (0x0)  (int)
>    pci.device_subclass = 7  (0x7)  (int)
>    pci.linux.sysfs_path = 
> '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.1'  (string)
>    pci.product = 'OZ711MP1/MS1 MemoryCardBus Controller'  (string)
>    pci.product_id = 28980  (0x7134)  (int)
>    pci.subsys_product_id = 4894  (0x131e)  (int)
>    pci.subsys_vendor = 'Fujitsu Limited.'  (string)
>    pci.subsys_vendor_id = 4303  (0x10cf)  (int)
>    pci.vendor = 'O2 Micro, Inc.'  (string)
>    pci.vendor_id = 4631  (0x1217)  (int)
> 
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'
>    info.bus = 'pcmcia'  (string)
>    info.parent = '/org/freedesktop/Hal/devices/pci_1217_7134_0'  (string)
>    info.product = 'SmartCardBus Reader'  (string)
>    info.subsystem = 'pcmcia'  (string)
>    info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>    info.vendor = 'O2Micro'  (string)
>    linux.hotplug_type = 2  (0x2)  (int)
>    linux.subsystem = 'pcmcia'  (string)
>    linux.sysfs_path = 
> '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.1/1.0'  (string)
>    pcmcia.card_id = 1  (0x1)  (int)
>    pcmcia.manf_id = 65535  (0xffff)  (int)
>    pcmcia.prod_id1 = 'O2Micro'  (string)
>    pcmcia.prod_id2 = 'SmartCardBus Reader'  (string)
>    pcmcia.prod_id3 = 'V1.0'  (string)
>    pcmcia.product = 'O2Micro'  (string)
>    pcmcia.socket_number = 1  (0x1)  (int)
>    pcmcia.vendor = 'O2Micro'  (string)
> 
> udi = '/org/freedesktop/Hal/devices/pci_1217_7134'
>    info.bus = 'pci'  (string)
>    info.linux.driver = 'yenta_cardbus'  (string)
>    info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
>    info.product = 'OZ711MP1/MS1 MemoryCardBus Controller'  (string)
>    info.subsystem = 'pci'  (string)
>    info.udi = '/org/freedesktop/Hal/devices/pci_1217_7134'  (string)
>    info.vendor = 'O2 Micro, Inc.'  (string)
>    linux.hotplug_type = 2  (0x2)  (int)
>    linux.subsystem = 'pci'  (string)
>    linux.sysfs_path = 
> '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.0'  (string)
>    pci.device_class = 6  (0x6)  (int)
>    pci.device_protocol = 0  (0x0)  (int)
>    pci.device_subclass = 7  (0x7)  (int)
>    pci.linux.sysfs_path = 
> '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.0'  (string)
>    pci.product = 'OZ711MP1/MS1 MemoryCardBus Controller'  (string)
>    pci.product_id = 28980  (0x7134)  (int)
>    pci.subsys_product_id = 4894  (0x131e)  (int)
>    pci.subsys_vendor = 'Fujitsu Limited.'  (string)
>    pci.subsys_vendor_id = 4303  (0x10cf)  (int)
>    pci.vendor = 'O2 Micro, Inc.'  (string)
>    pci.vendor_id = 4631  (0x1217)  (int)
> 8< ------------------------------------------------------------------ >8
> 
> 