[PATCH] Alchemy: fix PCMCIA warnings

[Sergei Shtylyov]

Fix the following warnings:

drivers/pcmcia/au1000_generic.c: In function `au1x00_pcmcia_socket_probe':
drivers/pcmcia/au1000_generic.c:405: warning: integer constant is too large for
"long" type
drivers/pcmcia/au1000_generic.c:413: warning: integer constant is too large for
"long" type

by properly postfixing the socket constants. While at it, fix the lines over 80
characters long in the vicinity...

Signed-off-by: Sergei Shtylyov <sshtylyov at ru.mvista.com>

 drivers/pcmcia/au1000_generic.h |   26 +++++++++++++++-----------
 1 files changed, 15 insertions(+), 11 deletions(-)

Index: linux-2.6/drivers/pcmcia/au1000_generic.h
===================================================================
--- linux-2.6.orig/drivers/pcmcia/au1000_generic.h
+++ linux-2.6/drivers/pcmcia/au1000_generic.h
@@ -34,9 +34,9 @@
 #define AU1000_PCMCIA_IO_SPEED       (255)
 #define AU1000_PCMCIA_MEM_SPEED      (300)
 
-#define AU1X_SOCK0_IO        0xF00000000
-#define AU1X_SOCK0_PHYS_ATTR 0xF40000000
-#define AU1X_SOCK0_PHYS_MEM  0xF80000000
+#define AU1X_SOCK0_IO        0xF00000000ULL
+#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
+#define AU1X_SOCK0_PHYS_MEM  0xF80000000ULL
 /* pseudo 32 bit phys addresses, which get fixed up to the
  * real 36 bit address in fixup_bigphys_addr() */
 #define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000
@@ -45,16 +45,20 @@
 /* pcmcia socket 1 needs external glue logic so the memory map
  * differs from board to board.
  */
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_PB1200)
-#define AU1X_SOCK1_IO        0xF08000000
-#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
-#define AU1X_SOCK1_PHYS_MEM  0xF88000000
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || \
+    defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || \
+    defined(CONFIG_MIPS_PB1200)
+#define AU1X_SOCK1_IO        0xF08000000ULL
+#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
+#define AU1X_SOCK1_PHYS_MEM  0xF88000000ULL
 #define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
 #define AU1X_SOCK1_PSEUDO_PHYS_MEM  0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || defined(CONFIG_MIPS_DB1200)
-#define AU1X_SOCK1_IO        0xF04000000
-#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
-#define AU1X_SOCK1_PHYS_MEM  0xF84000000
+#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+      defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || \
+      defined(CONFIG_MIPS_DB1200)
+#define AU1X_SOCK1_IO        0xF04000000ULL
+#define AU1X_SOCK1_PHYS_ATTR 0xF44000000ULL
+#define AU1X_SOCK1_PHYS_MEM  0xF84000000ULL
 #define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000
 #define AU1X_SOCK1_PSEUDO_PHYS_MEM  0xF8400000
 #endif