[FW ide-cs] Re: jvc cdrom drive lockup

Thu May 10 02:06:54 EDT 2007

On Sun, 2007-05-06 at 16:00 +0100, Richard Kennedy wrote:
> On Fri, 2007-05-04 at 23:32 +0900, Komuro wrote:
> > On Thu, 03 May 2007 15:29:19 +0100
> > Richard Kennedy <richard at rsk.demon.co.uk> wrote:
> > 
> > 
> > IDE bugs should be posted to the linux-ide mailing list.
> > 
> > 
> > > Hi all, 
> > > I have a JVC MP-CDX1 cdrom drive that came with my laptop which used to
> > > work with ide-cs but stopped working with newer kernels.
> > > 
> > > I added its ident to ide-cs.c (see patch below) and the drive now is
> > > detected and gets mounted when plugged in and seems to work correctly.
> > > 
> > > But when I eject the card, pccardctl eject 0, the laptop locks up
> > > completely, there are no messages in the log, and the fan goes to full
> > > speed so I guess the cpu is running at 100%.
> > > Any ideas what's going wrong or how to debug it ? 
> > > Is there anything else I need to patch to get this working ?
> > > 
> > > Thanks
> > > Richard
> > > 
> > > card info :- 
> > > 
> > > May  3 11:22:52 mininote kernel: pccard: PCMCIA card inserted into slot 0
> > > May  3 11:22:52 mininote kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
> > > May  3 11:22:52 mininote kernel: pcmcia: registering new device pcmcia0.0
> > > May  3 11:22:53 mininote kernel: hdc: UJDB130, ATAPI CD/DVD-ROM drive
> > > May  3 11:22:53 mininote kernel: ide1 at 0x190-0x197,0x396 on irq 3
> > > May  3 11:22:53 mininote kernel: ide-cs: hdc: Vpp = 0.0
> > > May  3 11:22:54 mininote kernel: hdc: ATAPI 20X CD-ROM drive, 128kB Cache
> > > May  3 11:22:54 mininote kernel: Uniform CD-ROM driver Revision: 3.20
> > > May  3 11:23:04 mininote hald: mounted /dev/hdc on behalf of uid 500
> > > May  3 11:23:34 mininote hald: unmounted /dev/hdc from '/media/FC_4 i386 ftp #1' on behalf of uid 500
> > > May  3 11:24:17 mininote kernel: pccard: card ejected from slot 0
> > > << lockup happened here >>

> I rebuilt the kernel with the lock dependency checking turned on, which
> shows up 2 problems (and also breaks the deadlock).
> 
> kernel: pccard: card ejected from slot 0
> kernel: 

> kernel: BUG: sleeping function called from invalid context at kernel/rwsem.c:20
> kernel: in_atomic():0, irqs_disabled():1
> kernel: INFO: lockdep is turned off.
> kernel: irq event stamp: 2258
> kernel: hardirqs last  enabled at (2257): [<c0462050>] kfree+0x78/0x7f
> kernel: hardirqs last disabled at (2258): [<c0600db5>] _spin_lock_irq+0xc/0x3a
> kernel: softirqs last  enabled at (2252): [<c0406b41>] do_softirq+0x4d/0xb6
> kernel: softirqs last disabled at (2243): [<c0406b41>] do_softirq+0x4d/0xb6
> kernel:  [<c042fda6>] down_read+0x15/0x4d
> kernel:  [<c04e2498>] pci_get_subsys+0x68/0xea
> kernel:  [<c04e2530>] pci_get_device+0x16/0x19
> kernel:  [<c054b6f6>] init_hwif_default+0x28/0xf0
> kernel:  [<c054c3d5>] ide_unregister+0x242/0x573
> kernel:  [<d7b68018>] ide_release+0x18/0x28 [ide_cs]
> kernel:  [<d7b68030>] ide_detach+0x8/0x14 [ide_cs]
> kernel:  [<c055cd0c>] pcmcia_device_remove+0x50/0xb5
> kernel:  [<c0543c50>] __device_release_driver+0x71/0x8e
> kernel:  [<c05440a5>] device_release_driver+0x31/0x46
> kernel:  [<c0543678>] bus_remove_device+0x70/0x80
> kernel:  [<c0541d87>] device_del+0x162/0x1c6
> kernel:  [<c0541df3>] device_unregister+0x8/0x10
> kernel:  [<c055c95c>] pcmcia_card_remove+0x58/0x77
> kernel:  [<c055d4da>] ds_event+0x56/0x87
> kernel:  [<c04d5181>] kobject_get+0xf/0x13
> kernel:  [<c05590e2>] send_event+0x31/0x49
> kernel:  [<c05592c1>] socket_shutdown+0xc/0xb3
> kernel:  [<c0559384>] socket_remove+0x1c/0x26
> kernel:  [<c05593cd>] pcmcia_eject_card+0x3f/0x4c
> kernel:  [<c055bcfc>] pccard_store_eject+0x1b/0x22
> kernel:  [<c055bce1>] pccard_store_eject+0x0/0x22
> kernel:  [<c054172b>] dev_attr_store+0x27/0x2c
> kernel:  [<c049b74b>] sysfs_write_file+0xbf/0xe8
> kernel:  [<c049b68c>] sysfs_write_file+0x0/0xe8
> kernel:  [<c0465ef1>] vfs_write+0xa8/0x154
> kernel:  [<c0466430>] sys_write+0x41/0x67
> kernel:  [<c0404c1a>] sysenter_past_esp+0x5f/0x99
> kernel:  =======================
Before calling init_hwif_default, ide_unregister gets lock ide_lock and disables irq.
init_hwif_default calls ide_default_io_base which calls pci_get_device and later
pci_get_subsys tries to apply for semaphore pci_bus_sem and goes to sleep.

Mostly, pci_get_device should be called when irq is turned on.

I still don't understand an issue. If you test it on a mobile, mostly, the process won't
sleep when applying for pci_bus_sem because there is no too many opportunities for 2 processes
to apply for the semaphore at the same time.

As just needing know if pci is initiated, ide_default_io_base just needs find if list
pci_devices is empty.

Could you try below patch against 2.6.21?

Signed-off-by: Zhang Yanmin <yanmin.zhang at intel.com>

---

diff -Nraup linux-2.6.21/drivers/pci/probe.c linux-2.6.21_fix/drivers/pci/probe.c

--- linux-2.6.21/drivers/pci/probe.c	2007-05-10 11:35:06.000000000 +0800
+++ linux-2.6.21_fix/drivers/pci/probe.c	2007-05-10 13:33:57.000000000 +0800
@@ -22,6 +22,18 @@ EXPORT_SYMBOL(pci_root_buses);
 
 LIST_HEAD(pci_devices);
 
+/*
+ * Some device drivers need know if pci is initiated.
+ * Basically, we think pci is not initiated when there
+ * is no device in list of pci_devices.
+ */
+int no_pci_devices(void)
+{
+	return list_empty(&pci_devices);
+}
+
+EXPORT_SYMBOL(no_pci_devices);
+
 #ifdef HAVE_PCI_LEGACY
 /**
  * pci_create_legacy_files - create legacy I/O port and memory files
diff -Nraup linux-2.6.21/include/asm-i386/ide.h linux-2.6.21_fix/include/asm-i386/ide.h
--- linux-2.6.21/include/asm-i386/ide.h	2007-02-05 02:44:54.000000000 +0800
+++ linux-2.6.21_fix/include/asm-i386/ide.h	2007-05-10 13:15:57.000000000 +0800
@@ -40,14 +40,13 @@ static __inline__ int ide_default_irq(un
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
-	struct pci_dev *pdev;
 	/*
 	 *	If PCI is present then it is not safe to poke around
 	 *	the other legacy IDE ports. Only 0x1f0 and 0x170 are
 	 *	defined compatibility mode ports for PCI. A user can 
 	 *	override this using ide= but we must default safe.
 	 */
-	if ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL)) == NULL) {
+	if (no_pci_devices()) {
 		switch(index) {
 			case 2: return 0x1e8;
 			case 3: return 0x168;
@@ -55,7 +54,6 @@ static __inline__ unsigned long ide_defa
 			case 5: return 0x160;
 		}
 	}
-	pci_dev_put(pdev);
 	switch (index) {
 		case 0:	return 0x1f0;
 		case 1:	return 0x170;
diff -Nraup linux-2.6.21/include/linux/pci.h linux-2.6.21_fix/include/linux/pci.h
--- linux-2.6.21/include/linux/pci.h	2007-05-10 11:35:07.000000000 +0800
+++ linux-2.6.21_fix/include/linux/pci.h	2007-05-10 13:33:43.000000000 +0800
@@ -424,6 +424,8 @@ extern struct bus_type pci_bus_type;
  * code, or pci core code. */
 extern struct list_head pci_root_buses;	/* list of all known PCI buses */
 extern struct list_head pci_devices;	/* list of all devices */
+/* Some device drivers need know if pci is initiated */
+extern int no_pci_devices(void);
 
 void pcibios_fixup_bus(struct pci_bus *);
 int __must_check pcibios_enable_device(struct pci_dev *, int mask);
@@ -709,6 +711,7 @@ static inline struct pci_dev *pci_get_cl
 { return NULL; }
 
 #define pci_dev_present(ids)	(0)
+#define no_pci_devices()	(1)
 #define pci_find_present(ids)	(NULL)
 #define pci_dev_put(dev)	do { } while (0)
 

