Yenta Socket work with 32-bit card but not 16-bit

[Dominik Brodowski]

Hi,

On Thu, Feb 08, 2007 at 05:24:36PM -0600, David Clark wrote:
> Something is not right!!!  Below is all I'm getting from lspcmcia
> -vvv...one line.  I have a similar result with lspci -vvv except the one
> line lists the pci controller.
> 
> "Socket 0 Bridge:        [yenta_cardbus]         (bus ID: 0000:00:14.0)"
> 
> Have you ever seen this before?  I'll get back to you after I look into
> it further.

It seems that in your case you need "pcmcia-socket-startup" to run -- which
is strange for a PPC. Normally, this call should be handled by udev, but you
might want to try out doing this call manually.

	Dominik