[Bug 7706] PCMCIA bridge not working

[bugme-daemon at bugzilla.kernel.org]

http://bugzilla.kernel.org/show_bug.cgi?id=7706





------- Comment #26 from susemuse27 at gmx.de  2007-08-04 00:30 -------
I did
insert the card, then
linux-s:/home/susanne # modprobe serial_cs
linux-s:/home/susanne # dmesg
and dmesg says:
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff 
0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
pcmcia: registering new device pcmcia0.0
the complete dmesg if needed is here:   http://phpfi.com/254290

bugme-daemon at bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #25 from daniel.ritz at gmx.ch  2007-08-03 16:44 -------
> so you have pcmciautils _and_ pcmcia-cs installed then? this could be the
> actual problem.
>
> what happens if you boot with 2.6.18, insert the card and then
> do a 'modprobe serial_cs'? what does dmesg look after this?
>
>
>   


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.