PLEASE HELP! *** DANGER *** unable to remove socket power (***PART 1***)

EX500R ex500r2001 at yahoo.ca
Fri Nov 10 00:34:53 EST 2006


Sorry, for double post, but the mailing system says that the message is to
big, so I divide it in to parts...

PART 1:

Hello,
I try to install SUSE 10.1 on my Toshiba Satellite 5205-S705. There are
several problems, but the most annoying one is "** DANGER *** unable to
remove socket power" I get when suspend-to-ram. After resume MiniPCI
wireless card disappears forever! The only way to get it back is to reboot
the computer. Before suspend wireless works fine. I read everything I could
find about this know problem, but nothing seems to
apply to my particular case.
I tried Slackware 11.0, newest 2.6 kernel - no luck. Same problem.
By the way, with 2.4 kernel wireless works fine (suspend/resume). But there
are a lot of other problems, so I'd really like to use 2.6.
I attach dmesg (kernel is built with PCI debug enabled) *** PART 1***.
lspci -vv, /proc/iomem, /proc/ioports, lsmod, pccardctl ident, pccardctl
info ***PART 2***.
 Please, let me know if you need an additional information.
Thank you!

------------dmesg----------------------
Linux version 2.6.16.21-0.25-default (geeko at buildhost) (gcc version 4.1.0
(SUSE Linux)) #7 Thu Nov 9 23:25:44 EST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
 BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
 BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffcc000 (usable)
 BIOS-e820: 000000001ffcc000 - 000000001ffd0000 (reserved)
 BIOS-e820: 000000001ffd0000 - 000000001ffe0000 (ACPI data)
 BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131020
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 126924 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 TOSHIB                                ) @ 0x000f0180
ACPI: RSDT (v001 TOSHIB 5200     0x20030327 TASM 0x04010000) @ 0x1ffd0000
ACPI: FADT (v002 TOSHIB 5200     0x20021230 TASM 0x04010000) @ 0x1ffd0058
ACPI: DBGP (v001 TOSHIB 5200     0x20030327 TASM 0x04010000) @ 0x1ffd00dc
ACPI: BOOT (v001 TOSHIB 5200     0x20030327 TASM 0x04010000) @ 0x1ffd0030
ACPI: DSDT (v001 TOSHIB 5200     0x20030327 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0xd808
Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x31a resume=/dev/hda3
splash=silent pci=assign-busses pci=routeirq
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2394.320 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513656k/524080k available (1662k kernel code, 9804k reserved, 540k
data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4794.47 BogoMIPS
(lpj=9588958)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00004400
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz stepping 07
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2199k freed
 not found!
ACPI: setting ELCR to 0200 (from 0af0)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfcf0c, last bus=4
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [8086/1a30] 000600 00
PCI: Calling quirk c01c18b0 for 0000:00:00.0
PCI: Calling quirk c023a490 for 0000:00:00.0
PCI: Calling quirk c023a5a0 for 0000:00:00.0
PCI: Calling quirk c023aa00 for 0000:00:00.0
PCI: Found 0000:00:01.0 [8086/1a31] 000604 01
PCI: Calling quirk c01c18b0 for 0000:00:01.0
PCI: Calling quirk c023a490 for 0000:00:01.0
PCI: Calling quirk c023a5a0 for 0000:00:01.0
PCI: Calling quirk c023aa00 for 0000:00:01.0
PCI: Found 0000:00:1e.0 [8086/2448] 000604 01
PCI: Calling quirk c01c18b0 for 0000:00:1e.0
PCI: Calling quirk c023a490 for 0000:00:1e.0
PCI: Calling quirk c023a5a0 for 0000:00:1e.0
PCI: Calling quirk c023aa00 for 0000:00:1e.0
PCI: Found 0000:00:1f.0 [8086/248c] 000601 00
PCI: Calling quirk c01c2010 for 0000:00:1f.0
PCI quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region eec0-eeff claimed by ICH4 GPIO
PCI: Calling quirk c01c18b0 for 0000:00:1f.0
PCI: Calling quirk c023a490 for 0000:00:1f.0
PCI: Calling quirk c023a5a0 for 0000:00:1f.0
PCI: Calling quirk c023aa00 for 0000:00:1f.0
PCI: Found 0000:00:1f.1 [8086/248a] 000101 00
PCI: Calling quirk c01c18b0 for 0000:00:1f.1
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Calling quirk c0339d20 for 0000:00:1f.1
PCI: Calling quirk c023a490 for 0000:00:1f.1
PCI: Calling quirk c023a4e0 for 0000:00:1f.1
PCI: Calling quirk c023a5a0 for 0000:00:1f.1
PCI: Calling quirk c023aa00 for 0000:00:1f.1
PCI: Found 0000:00:1f.5 [8086/2485] 000401 00
PCI: Calling quirk c01c18b0 for 0000:00:1f.5
PCI: Calling quirk c023a490 for 0000:00:1f.5
PCI: Calling quirk c023a5a0 for 0000:00:1f.5
PCI: Calling quirk c023aa00 for 0000:00:1f.5
PCI: Found 0000:00:1f.6 [8086/2486] 000703 00
PCI: Calling quirk c01c18b0 for 0000:00:1f.6
PCI: Calling quirk c023a490 for 0000:00:1f.6
PCI: Calling quirk c023a5a0 for 0000:00:1f.6
PCI: Calling quirk c023aa00 for 0000:00:1f.6
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning behind PCI bridge 0000:00:1e.0, config 040200, pass 0
PCI: Scanning behind PCI bridge 0000:00:01.0, config 000000, pass 1
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [10de/031a] 000300 00
PCI: Calling quirk c01c18b0 for 0000:01:00.0
PCI: Calling quirk c023a490 for 0000:01:00.0
PCI: Calling quirk c023aa00 for 0000:01:00.0
Boot video device is 0000:01:00.0
PCI: Fixups for bus 0000:01
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:1e.0, config 000000, pass 1
PCI: Scanning bus 0000:02
PCI: Found 0000:02:06.0 [1033/0035] 000c03 00
PCI: Calling quirk c01c18b0 for 0000:02:06.0
PCI: Calling quirk c023a490 for 0000:02:06.0
PCI: Calling quirk c023aa00 for 0000:02:06.0
PCI: Found 0000:02:06.1 [1033/0035] 000c03 00
PCI: Calling quirk c01c18b0 for 0000:02:06.1
PCI: Calling quirk c023a490 for 0000:02:06.1
PCI: Calling quirk c023aa00 for 0000:02:06.1
PCI: Found 0000:02:06.2 [1033/00e0] 000c03 00
PCI: Calling quirk c01c18b0 for 0000:02:06.2
PCI: Calling quirk c023a490 for 0000:02:06.2
PCI: Calling quirk c023aa00 for 0000:02:06.2
PCI: Found 0000:02:07.0 [104c/8023] 000c00 00
PCI: Calling quirk c01c18b0 for 0000:02:07.0
PCI: Calling quirk c023a490 for 0000:02:07.0
PCI: Calling quirk c023aa00 for 0000:02:07.0
PCI: Found 0000:02:08.0 [8086/1031] 000200 00
PCI: Calling quirk c01c18b0 for 0000:02:08.0
PCI: Calling quirk c023a490 for 0000:02:08.0
PCI: Calling quirk c023a5a0 for 0000:02:08.0
PCI: Calling quirk c023aa00 for 0000:02:08.0
PCI: Found 0000:02:0a.0 [104c/ac50] 000607 02
PCI: Calling quirk c01c18b0 for 0000:02:0a.0
PCI: Calling quirk c023a490 for 0000:02:0a.0
PCI: Calling quirk c023aa00 for 0000:02:0a.0
PCI: Found 0000:02:0b.0 [1179/0617] 000607 02
PCI: Calling quirk c01c18b0 for 0000:02:0b.0
PCI: Calling quirk c023a490 for 0000:02:0b.0
PCI: Calling quirk c023aa00 for 0000:02:0b.0
PCI: Found 0000:02:0d.0 [1179/0805] 000880 00
PCI: Calling quirk c01c18b0 for 0000:02:0d.0
PCI: Calling quirk c023a490 for 0000:02:0d.0
PCI: Calling quirk c023aa00 for 0000:02:0d.0
PCI: Fixups for bus 0000:02
PCI: Transparent bridge - 0000:00:1e.0
PCI: Scanning behind PCI bridge 0000:02:0a.0, config 030302, pass 0
PCI: Scanning behind PCI bridge 0000:02:0b.0, config 040402, pass 0
PCI: Scanning behind PCI bridge 0000:02:0a.0, config 000000, pass 1
PCI: Scanning behind PCI bridge 0000:02:0b.0, config 000000, pass 1
PCI: Bus scan for 0000:02 returning with max=0a
PCI: Bus scan for 0000:00 returning with max=0a
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 5 (level, low) ->
IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKD] -> GSI 6 (level, low) ->
IRQ 6
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [LNKE] -> GSI 4 (level, low) ->
IRQ 4
ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 4 (level, low) ->
IRQ 4
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 10 (level, low) ->
IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
TC classifier action (bugs to netdev at vger.kernel.org cc hadi at cyberus.ca)
Setting up standard PCI resources
  got res [1000:10ff] bus [1000:10ff] flags 101 for BAR 0 of 0000:00:1f.5
PCI: moved device 0000:00:1f.5 resource 0 (101) to 1000
  got res [1400:14ff] bus [1400:14ff] flags 101 for BAR 0 of 0000:00:1f.6
PCI: moved device 0000:00:1f.6 resource 0 (101) to 1400
  got res [1800:187f] bus [1800:187f] flags 101 for BAR 1 of 0000:00:1f.6
PCI: moved device 0000:00:1f.6 resource 1 (101) to 1800
  got res [1880:18bf] bus [1880:18bf] flags 101 for BAR 1 of 0000:00:1f.5
PCI: moved device 0000:00:1f.5 resource 1 (101) to 1880
PCI: Failed to allocate mem resource #6:20000 at e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: fd000000-fdffffff
  PREFETCH window: d0000000-dfffffff
  got res [fce00000:fce03fff] bus [fce00000:fce03fff] flags 200 for BAR 1 of
0000:02:07.0
PCI: moved device 0000:02:07.0 resource 1 (200) to fce00000
  got res [fce04000:fce04fff] bus [fce04000:fce04fff] flags 200 for BAR 0 of
0000:02:0a.0
PCI: moved device 0000:02:0a.0 resource 0 (200) to fce04000
  got res [fce05000:fce05fff] bus [fce05000:fce05fff] flags 200 for BAR 0 of
0000:02:0b.0
PCI: moved device 0000:02:0b.0 resource 0 (200) to fce05000
  got res [fce06000:fce067ff] bus [fce06000:fce067ff] flags 200 for BAR 0 of
0000:02:07.0
PCI: moved device 0000:02:07.0 resource 0 (200) to fce06000
  got res [fce06800:fce069ff] bus [fce06800:fce069ff] flags 200 for BAR 0 of
0000:02:0d.0
PCI: moved device 0000:02:0d.0 resource 0 (200) to fce06800
  got res [fce06a00:fce06aff] bus [fce06a00:fce06aff] flags 200 for BAR 0 of
0000:02:06.2
PCI: moved device 0000:02:06.2 resource 0 (200) to fce06a00
PCI: Bus 3, cardbus bridge: 0000:02:0a.0
  IO window: 0000c000-0000c0ff
  IO window: 0000c400-0000c4ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 36000000-37ffffff
PCI: Bus 7, cardbus bridge: 0000:02:0b.0
  IO window: 0000c800-0000c8ff
  IO window: 0000cc00-0000ccff
  PREFETCH window: 32000000-33ffffff
  MEM window: 38000000-39ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: fce00000-fcefffff
  PREFETCH window: 30000000-33ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
  got res [fce04000:fce04fff] bus [fce04000:fce04fff] flags 200 for BAR 0 of
0000:02:0a.0
PCI: moved device 0000:02:0a.0 resource 0 (200) to fce04000
PCI: Enabling device 0000:02:0a.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 10 (level, low) ->
IRQ 10
PCI: Enabling bus mastering for device 0000:02:0a.0
PCI: Setting latency timer of device 0000:02:0a.0 to 64
  got res [fce05000:fce05fff] bus [fce05000:fce05fff] flags 200 for BAR 0 of
0000:02:0b.0
PCI: moved device 0000:02:0b.0 resource 0 (200) to fce05000
PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
PCI: Enabling bus mastering for device 0000:02:0b.0
Simple Boot Flag at 0x7c set to 0x1
audit: initializing netlink socket (disabled)
audit(1163115707.536:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered (default)
PCI: Calling quirk c01c2150 for 0000:00:00.0
PCI: Calling quirk c022d450 for 0000:00:00.0
PCI: Calling quirk c01c2150 for 0000:00:01.0
PCI: Calling quirk c022d450 for 0000:00:01.0
PCI: Calling quirk c01c2150 for 0000:00:1e.0
PCI: Calling quirk c022d450 for 0000:00:1e.0
PCI: Calling quirk c01c2150 for 0000:00:1f.0
PCI: Calling quirk c022d450 for 0000:00:1f.0
PCI: Calling quirk c01c2150 for 0000:00:1f.1
PCI: Calling quirk c022d450 for 0000:00:1f.1
PCI: Calling quirk c01c2150 for 0000:00:1f.5
PCI: Calling quirk c022d450 for 0000:00:1f.5
PCI: Calling quirk c01c2150 for 0000:00:1f.6
PCI: Calling quirk c022d450 for 0000:00:1f.6
PCI: Calling quirk c01c2150 for 0000:01:00.0
PCI: Calling quirk c022d450 for 0000:01:00.0
PCI: Calling quirk c01c2150 for 0000:02:06.0
PCI: Calling quirk c022d450 for 0000:02:06.0
PCI: Calling quirk c01c2150 for 0000:02:06.1
PCI: Calling quirk c022d450 for 0000:02:06.1
PCI: Calling quirk c01c2150 for 0000:02:06.2
PCI: Calling quirk c022d450 for 0000:02:06.2
PCI: Calling quirk c01c2150 for 0000:02:07.0
PCI: Calling quirk c022d450 for 0000:02:07.0
PCI: Calling quirk c01c2150 for 0000:02:08.0
PCI: Calling quirk c022d450 for 0000:02:08.0
PCI: Calling quirk c01c2150 for 0000:02:0a.0
PCI: Calling quirk c022d450 for 0000:02:0a.0
PCI: Calling quirk c01c2150 for 0000:02:0b.0
PCI: Calling quirk c022d450 for 0000:02:0b.0
PCI: Calling quirk c01c2150 for 0000:02:0d.0
PCI: Calling quirk c022d450 for 0000:02:0d.0
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 10240k, total
65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:e140
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76045
bytes,<6>...found (1280x1024, 33692 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
airo:  Probing for PCI adapters
airo:  Finished probing for PCI adapters
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
 LAN CBC0 USB2 USB3 USB4 AMDM PWRB  LID
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 144k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS726060M9AT00, ATA DISK drive
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
hdb: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
Probing IDE interface ide1...
hdc: HTE721060G9AT00, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63,
UDMA(100)
hdc: cache flushes supported
 hdc: hdc1
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (61 C)
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
Attempting manual resume
Replacing swsusp.
Suspend2 2.2.8: Swapwriter: Signature found.
Suspend2 2.2.8: Resuming enabled.
Suspend2 2.2.8: Normal swapspace found.
Suspend2 2.2.8: No image found.
Suspend2 2.2.8: Read image returned -61.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 10 (level, low) ->
IRQ 10
Yenta: CardBus bridge found at 0000:02:0a.0 [12a3:ab01]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0a.0, mfunc 0x01000002, devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 10
Socket status: 30000010
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
cs: IO port probe 0xc000-0xcfff: clean.
pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Yenta: ISA IRQ mask 0x0088, PCI irq 11
Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
cs: IO port probe 0xc000-0xcfff: clean.
pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKD] -> GSI 6 (level, low) ->
IRQ 6
ohci_hcd 0000:02:06.0: OHCI Host Controller
ohci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:02:06.0: irq 6, io mem 0xfceff000
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd
usb usb1: SerialNumber: 0000:02:06.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [LNKE] -> GSI 4 (level, low) ->
IRQ 4
ohci_hcd 0000:02:06.1: OHCI Host Controller
ohci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:02:06.1: irq 4, io mem 0xfcefe000
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xfce00000-0xfcefffff: excluding 0xfce00000-0xfce0ffff
0xfcef0000-0xfcefffff
pcmcia: registering new device pcmcia0.0
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd
usb usb2: SerialNumber: 0000:02:06.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
Linux agpgart interface v0.101 (c) Dave Jones
  got res [fce06a00:fce06aff] bus [fce06a00:fce06aff] flags 200 for BAR 0 of
0000:02:06.2
PCI: moved device 0000:02:06.2 resource 0 (200) to fce06a00
PCI: Enabling device 0000:02:06.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
PCI: Enabling bus mastering for device 0000:02:06.2
ehci_hcd 0000:02:06.2: EHCI Host Controller
PCI: Enabling Mem-Wr-Inval for device 0000:02:06.2
ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:02:06.2: irq 11, io mem 0xfce06a00
ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.21-0.25-default ehci_hcd
usb usb3: SerialNumber: 0000:02:06.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
usb 1-3: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 4 (level, low) ->
IRQ 4
e100: eth0: e100_probe: addr 0xfcefd000, irq 4, MAC addr 00:00:39:36:5E:EA
  got res [fce06000:fce067ff] bus [fce06000:fce067ff] flags 200 for BAR 0 of
0000:02:07.0
PCI: moved device 0000:02:07.0 resource 0 (200) to fce06000
  got res [fce00000:fce03fff] bus [fce00000:fce03fff] flags 200 for BAR 1 of
0000:02:07.0
PCI: moved device 0000:02:07.0 resource 1 (200) to fce00000
PCI: Enabling device 0000:02:07.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) ->
IRQ 11
PCI: Enabling bus mastering for device 0000:02:07.0
PCI: Setting latency timer of device 0000:02:07.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[fce06000-fce067ff]
Max Packet=[2048]  IR/IT contexts=[4/8]
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
PCI: Enabling bus mastering for device 0000:00:1f.5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
cs: IO port probe 0x100-0x3af: excluding 0x1e0-0x1e7
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x1e0-0x1e7
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xa00-0xaff: clean.
orinoco 0.15rc3 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
<proski at gnu.org>, et al)
orinoco_cs 0.15rc3 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel
Roskin <proski at gnu.org>, et al)
eth1: Hardware identity 0005:0004:0005:0000
eth1: Station identity  001f:0001:0008:000a
eth1: Firmware determined as Lucent/Agere 8.10
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:7D:51:0A
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 10, io 0xc100-0xc13f
nvidia: module license 'NVIDIA' taints kernel.
intel8x0_measure_ac97_clock: measured 62464 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 5 (level, low) ->
IRQ 5
NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04
PDT 2006
NVRM: PAT index 1 already configured for Write-Combining!
NVRM: Aborting, due to PAT already being configured
usb 1-3: new low speed USB device using ohci_hcd and address 3
hw_random: RNG not detected
usb 1-3: new device found, idVendor=06cb, idProduct=0008
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Synaptics WheelPad
usb 1-3: Manufacturer: Synaptics Inc.
usb 1-3: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00003900001dbc9d]
pccard: card ejected from slot 0
input: Synaptics USB touchpad as /class/input/input3
usbcore: registered new driver synaptics-usb
USB Synaptics touchpad Driver v1.4
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
eth1: Hardware identity 0005:0004:0005:0000
eth1: Station identity  001f:0001:0008:000a
eth1: Firmware determined as Lucent/Agere 8.10
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:7D:51:0A
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 10, io 0xc100-0xc13f
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel at redhat.com
loop: loaded (max 8 devices)
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.0.
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1163115841.844:2): AppArmor (version 2.0-19.43r6320) initialized

Adding 1919756k swap on /dev/hda3.  Priority:-1 extents:1 across:1919756k
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
audit(1163133846.123:3): REJECTING access to capability 'sys_tty_config'
(mdnsd(1946) profile /usr/sbin/mdnsd active /usr/sbin/mdnsd)
IA-32 Microcode Update Driver: v1.14 <tigran at veritas.com>
IA-32 Microcode Update Driver v1.14 unregistered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect
breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
for details.
acpi-cpufreq: CPU0 - ACPI performance management activated.
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth1: New link status: Disconnected (0002)
------------dmesg----------------------

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 




More information about the linux-pcmcia mailing list