[Bug 7427] yenta_socket error -12
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Thu Nov 2 07:45:40 EST 2006
http://bugzilla.kernel.org/show_bug.cgi?id=7427
------- Additional Comments From frederik.mattelaere at telenet.be 2006-11-02 04:31 -------
Hi,
Here is the information from that knoppix Live CD where the yenta socket not
fails!
Best Regards,
Frederik
aded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio4
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 1928.000 MB/sec
raid5: using function: pIII_sse (1928.000 MB/sec)
raid6: int32x1 531 MB/s
raid6: int32x2 675 MB/s
raid6: int32x4 402 MB/s
raid6: int32x8 402 MB/s
raid6: mmxx1 1175 MB/s
raid6: mmxx2 2015 MB/s
raid6: sse1x1 562 MB/s
raid6: sse1x2 1136 MB/s
raid6: using algorithm sse1x2 (1136 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
ACPI wakeup devices:
LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0
ACPI: (supports S0 S3 S4 S4bios S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
ntfs: version magic '2.6.11-kanotix-7 preempt 586 gcc-3.3' should be
'2.6.11-auditor-10 preempt 586 gcc-3.3'
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 288k freed
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (69 C)
ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [1025:001d]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000821
acx100: It looks like you've been coaxed into buying a wireless network card
acx100: that uses the mysterious ACX100/ACX111 chip from Texas Instruments.
acx100: You should better have bought e.g. a PRISM(R) chipset based card,
acx100: since that would mean REAL vendor Linux support.
acx100: Given this info, it's evident that this driver is still EXPERIMENTAL,
acx100: thus your mileage may vary. Reading README file and/or Craig's HOWTO is
recommended, visit http://acx100.sf.net in case of further
questions/discussion.
acx100: Compiled to use 32bit I/O access (faster, however I/O timing issues
might occur, such as firmware upload failure!) instead of 16bit access
Running on a little-endian CPU
acx_init_module: dev_info is: TI acx_pci
acx_init_module: TI acx_pci.o: Ver 0.2.0pre8 driver initialized, waiting for
cards to probe...
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
acx_probe_pci: WARNING: ACX111 support is quite experimental!
Found ACX111-based wireless network card at 0000:02:00.0, irq:11,
phymem1:0xf820000, phymem2:0xf800000, mem1:0xcf84c000, mem1_size:8192,
mem2:0xcff00000, mem2_size:131072
initial debug setting is 0x001b
acx_select_io_register_set: using ACX111 io resource addresses (size: 56)
hw_unavailable = 1
acx_probe_pci: TI acx_pci: Using IRQ 11
reset hw_unavailable++
acx_reset_mac: enable soft reset...
acx_reset_mac: disable soft reset and go to init mode...
cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x3000-0x7fff:<4>Requesting firmware image 'TIACX111.BIN'
clean.
No firmware image was provided. Check your hotplug scripts
Attention: no firmware directory specified via module parameter firmware_dir,
using default firmware directory /usr/share/acx
Reading firmware image '/usr/share/acx/TIACX111.BIN'
cs: IO port probe 0xa00-0xaff: clean.
Allocated 62772 bytes for firmware module loading.
not using auto increment for firmware loading
acx_write_fw: firmware written
acx_write_fw (firmware): 0, acx_validate_fw: 0
acx_reset_dev: boot up eCPU and wait for complete...
acx_reset_dev: Received signal that card is ready to be configured :) (the eCPU
has woken up)
acx_reset_dev: Clean up cmd mailbox access area
reset hw_unavailable--
acx100: allocated net device wlan0, driver compiled against wireless extensions
v17 and Linux 2.6.11-auditor-10
******************************************
************* acx_init_mac_1 *************
******************************************
==> Get the mailbox pointers from the scratch pad registers
CmdMailboxOffset = 1dd00
InfoMailboxOffset = 1de86
<== Get the mailbox pointers from the scratch pad registers
CommandParameters = [ 0xcff1dd04 ]
InfoParameters = [ 0xcff1de8a ]
Requesting firmware image 'RADIO16.BIN'
No firmware image was provided. Check your hotplug scripts
Reading firmware image '/usr/share/acx/RADIO16.BIN'
ERROR 2 trying to open firmware image file 'RADIO16.BIN': file not found - make
sure this EXACT filename is in eXaCtLy this directory!
WARNING: no suitable radio module (RADIO16.BIN) found to load. No problem in
case of a combined firmware, FATAL when using a separated firmware (base
firmware / radio image).
acx111_init_packet_templates: Init max packet templates
acx111_create_dma_regions: set up acx111 queue memory configuration (queue
configs + descriptors)
dump queue head (from card):
len: 24
tx_memory_block_address: 17F60
rx_memory_block_address: 11660
rx1_queue address: FA54
tx1_queue address: 100D4
get_mask 0x00004182, set_mask 0x00000000
Don't know how to get sensitivity for radio type 0x16, please try to add that!
Got sensitivity value 0
Got antenna value 0x4A
Got regulatory domain 0x30
get_mask 0x00000000, set_mask 0x00000000 - after update
new ratevector: 82 84 0b 0c 12 16 18 24 2c 30 48 60 6c
setting RXconfig to 2000:0000
Beacon length:69
hw_unavailable--
acx100: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia),
EEPROM version 0x05. Uploaded firmware 'Rev 0.1.0.11' (0x03010101).
creating /proc entry driver/acx_wlan0
creating /proc entry driver/acx_wlan0_diag
creating /proc entry driver/acx_wlan0_eeprom
creating /proc entry driver/acx_wlan0_phy
acx_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 loaded successfully
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 11, io base 0x1200
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xf0000000, 00:c0:9f:1c:a1:f8, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 189M
agpgart: AGP aperture is 64M @ 0xa0000000
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xf0000000, 00:c0:9f:1c:a1:f8, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
input: PC Speaker
Adding 481908k swap on /dev/hda6. Priority:-1 extents:1
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1400 MHz.
mtrr: 0x90000000,0x1000000 overlaps existing 0x90000000,0x800000
NET: Registered protocol family 17
module count ++
OPENING DEVICE
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
ACX100 f/w ver >= 1.9.3.e or ACX111 --> using s/w timer
initial settings update on iface activation.
get_mask 0x00000000, set_mask 0x0037eefc
important setting has been changed --> need to update packet templates, too
Updating Tx fallback to 0 retries
Updating transmit power: 15 dBm
Updating antenna value: 0x4A
Updating Energy Detect (ED) threshold: 0
ACX111 doesn't support ED!
Updating Channel Clear Assessment (CCA) value: 0x00
ACX111 doesn't support CCA!
Updating channel: 6
Updating: enable Tx
Updating: enable Rx on channel: 6
Updating short retry limit: 7, long retry limit: 4
Updating Tx MSDU lifetime: 4096
Updating regulatory domain: 0x30
setting RXconfig to 2010:0fdd
Updating WEP key settings
Setting WEP key 0 as default.
Starting radio scan
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
<acx_sta_list_add> sta=00:04:e2:9b:3b:d2
found and registered station: ESSID "" on channel 6, BSSID 00:04:e2:9b:3b:d2,
Access Point, caps 0x0421, SIR 13, SNR 0
found and registered station: ESSID "" on channel 6, BSSID 00:04:e2:9b:3b:d2,
Access Point, caps 0x0421, SIR 13, SNR 0
Got Info IRQ: status 0x0001, type 0xd200: (unknown)
<Scan Table>: SSID="",CH=6,SIR=13,SNR=0
peer_cap 0x0421, needed_cap 0x0001
found station with empty or single-space (hidden) SSID, considering for assoc
attempt
acx_complete_dot11_scan: matching station found: 00:04:e2:9b:3b:d2, joining
acx_cmd_join_bssid rates_basic 0003, rates_supported 1fff
<acx_cmd_join_bssid> BSS_Type = 2
<acx_cmd_join_bssid> JoinBSSID MAC:00:04:e2:9b:3b:d2
Sending authentication1 request, awaiting response!
acx_set_status: Setting status = 2 (WAIT_AUTH)
<acx_set_timer> Elapse = 1500000
00:c0:49:d6:b6:e1 00:c0:49:d6:b6:e1 00:04:e2:9b:3b:d2 00:04:e2:9b:3b:d2
00:04:e2:9b:3b:d2
Algorithm is ok
acx_process_authen auth seq step 2
acx_set_status: Setting status = 3 (AUTHENTICATED)
<acx_set_timer> Elapse = 1500000
Sending association request, awaiting response! NOT ASSOCIATED YET.
association: requesting capabilities 0x0020
acx_set_status: Setting status = 4 (ASSOCIATED)
ASSOCIATED!
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
acx_set_status: Setting status = 0 (STOPPED)
module count --
module count ++
OPENING DEVICE
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
ACX100 f/w ver >= 1.9.3.e or ACX111 --> using s/w timer
initial settings update on iface activation.
get_mask 0x00000000, set_mask 0x0006cebc
important setting has been changed --> need to update packet templates, too
Updating transmit power: 15 dBm
Updating antenna value: 0x4A
Updating Energy Detect (ED) threshold: 0
ACX111 doesn't support ED!
Updating Channel Clear Assessment (CCA) value: 0x00
ACX111 doesn't support CCA!
Updating channel: 6
Updating: enable Tx
Updating: enable Rx on channel: 6
Updating regulatory domain: 0x30
Updating WEP key settings
Setting WEP key 0 as default.
Starting radio scan
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
<acx_sta_list_add> sta=00:04:e2:9b:3b:d2
found and registered station: ESSID "" on channel 6, BSSID 00:04:e2:9b:3b:d2,
Access Point, caps 0x0021, SIR 13, SNR 0
Got Info IRQ: status 0x0001, type 0xd200: (unknown)
<Scan Table>: SSID="",CH=6,SIR=13,SNR=0
peer_cap 0x0021, needed_cap 0x0001
found station with empty or single-space (hidden) SSID, considering for assoc
attempt
acx_complete_dot11_scan: matching station found: 00:04:e2:9b:3b:d2, joining
acx_cmd_join_bssid rates_basic 0003, rates_supported 1fff
<acx_cmd_join_bssid> BSS_Type = 2
<acx_cmd_join_bssid> JoinBSSID MAC:00:04:e2:9b:3b:d2
Sending authentication1 request, awaiting response!
acx_set_status: Setting status = 2 (WAIT_AUTH)
<acx_set_timer> Elapse = 1500000
00:c0:49:d6:b6:e1 00:c0:49:d6:b6:e1 00:04:e2:9b:3b:d2 00:04:e2:9b:3b:d2
00:04:e2:9b:3b:d2
Algorithm is ok
acx_process_authen auth seq step 2
acx_set_status: Setting status = 3 (AUTHENTICATED)
<acx_set_timer> Elapse = 1500000
Sending association request, awaiting response! NOT ASSOCIATED YET.
association: requesting capabilities 0x0020
acx_set_status: Setting status = 4 (ASSOCIATED)
ASSOCIATED!
acx_timer: status = 4
root at 1[knoppix]# lspci -vvv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
80)
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 8
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: 90000000-9fffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 0f000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 0f400000-0f7ff000 (prefetchable)
Memory window 1: 0f800000-0fbff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev
10)
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1100 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1e) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 22
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1200 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97
Audio Controller (rev 40)
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e100 [size=4]
Region 2: I/O ports at e104 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97
Modem] (rev 20)
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e200 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
51)
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 2000ns max), Cache Line Size: 0x04 (16 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X
VGA Controller (TwisterK) (rev 01) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 001d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 0x04 (16 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at 90000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=x4
0000:02:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless
Interface
Subsystem: Unknown device 010e:16ec
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 0f820000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at 0f800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Commando /proc/iomemI could not ask from console! I did go manualy to the file
iomem under the
the directory proc/ and opend the file iomem with "vi"!!!!!!!!!!!!
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : System ROM
00100000-0efeffff : System RAM
00100000-003a75df : Kernel code
003a75e0-004ca37f : Kernel data
0eff0000-0effffbf : ACPI Tables
0effffc0-0effffff : ACPI Non-volatile Storage
0f000000-0f000fff : 0000:00:0a.0
0f000000-0f000fff : yenta_socket
0f400000-0f7fffff : PCI CardBus #02
0f800000-0fbfffff : PCI CardBus #02
0f800000-0f81ffff : 0000:02:00.0
0f800000-0f81ffff : ACX1xx_2
0f820000-0f821fff : 0000:02:00.0
0f820000-0f821fff : ACX1xx_1
90000000-9fffffff : PCI Bus #01
90000000-97ffffff : 0000:01:00.0
90000000-90eeffff : vesafb
a0000000-a3ffffff : 0000:00:00.0
e0000000-efffffff : PCI Bus #01
"iomem" [readonly] 27L, 901C
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
More information about the linux-pcmcia
mailing list