[RFC] [PATCH] pcmcia/yenta ti113x route irq to isa

[Dominik Brodowski]

Hi,

On Wed, Mar 15, 2006 at 10:14:56PM +0100, Jens.Kuenzer wrote:
> This is a patch for a old IBM Thinkpad 760ED notebook.
> The pci irq pin of the ti1130 pcmcia bridge is not connected.
> To use the cardbus, the irq has to be routed to an isa irq.
> This patch detects an valid irq and route cardbus interupts to isa instead 
> of pci.
> (If a valid pci irq is detected it should use it and not the isa irq.)
> 
> I have tested it in my laptop only. I tested a ethernet and a usb cardbus 
> card. Both OK
> I also inserted but don't realy used a old pcmcia modem card. It detected 
> the irq correct.
> 
> Maybe some of you can test this patch on other hardware.
> And please review the changes, especially those in yenta_socket.c
> I am not sure about these changes not breaking other ti pcmcia bridges.

Please add a proper Signed-off-by: line to your patch, then I'll put it into
pcmcia-2.6.git for testing in -mm.

	Dominik