ENE CB710 Bus

[Diego Martín]

Hi,

Do you say the SD/MMC cardreader lines or the wireless
pcmcia card I have inserted?

The pcmcia card does not appear in the lspci :( That's
the problem.

The lspci output:
0000:00:00.0 Host bridge: Intel Corporation Mobile
915GM/PM/GMS/910GML Express Processor to DRAM
Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corporation Mobile
915GM/PM Express PCI Express Root Port (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev
04)
0000:00:1d.1 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev
04)
0000:00:1d.2 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev
04)
0000:00:1d.3 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev
04)
0000:00:1d.7 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI
Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801
Mobile PCI Bridge (rev d4)
0000:00:1e.2 Multimedia audio controller: Intel
Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Audio Controller (rev 04)
0000:00:1e.3 Modem: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem
Controller (rev 04)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM
(ICH6M) LPC Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller
(rev 04)
0000:00:1f.3 SMBus: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
(rev 04)
0000:01:00.0 VGA compatible controller: ATI
Technologies Inc M24 1P [Radeon Mobility X600]
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies,
Inc. IEEE 1394 Host Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek
Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev
10)
0000:02:04.0 CardBus bridge: ENE Technology Inc
CB-710/2/4 Cardbus Controller
0000:02:04.1 FLASH memory: ENE Technology Inc ENE PCI
Memory Stick Card Reader Controller
0000:02:04.2 0805: ENE Technology Inc ENE PCI Secure
Digital Card Reader Controller


Thanks,

Diego


 --- Dominik Brodowski <linux at dominikbrodowski.net>
escribió:

> Hi,
> 
> On Fri, Mar 31, 2006 at 07:48:56PM +0200, Diego
> Martín wrote:
> > The lspcmcia -vv output:
> >  Socket 0 Bridge:        [yenta_cardbus]        
> (bus ID: 0000:02:04.0)
> >          Configuration:  state: suspended       
> ready: yes
> >                          Voltage: 3.3V Vcc: 3.3V
> Vpp: 3.3V
> >                          Available IRQs: 3, 5, 6,
> 10
> >                          Available iomem:       
> 0x00000100 - 0x0000016f
> >                                                 
> 0x00000178 - 0x0000036f
> >                                                 
> 0x00000378 - 0x000004cf
> >                                                 
> 0x000004d8 - 0x000004ff
> >                                                 
> 0x00000810 - 0x000008ff
> >                                                 
> 0x00000a00 - 0x00000aff
> >                                                 
> 0x00000c00 - 0x00000cff
> >                                                 
> 0x0000a000 - 0x0000bfff
> >                          Available ioports:     
> 0x000c0000 - 0x000fffff
> >                                                 
> 0x60000000 - 0x60ffffff
> >                                                 
> 0x80000000 - 0x8fffffff
> >                                                 
> 0xa0000000 - 0xa0ffffff
> >                                                 
> 0xb0000000 - 0xbfffffff
> >    CardBus card -- see "lspci" for more
> information
> >  
> > The lspci cardbus line:
> >  0000:02:04.0 CardBus bridge: ENE Technology Inc
> CB-710/2/4 Cardbus Controller
> 
> There should be another line in lspci -- please send
> me the full lspci
> output.
> 
> 	Dominik
> 



		
______________________________________________ 
LLama Gratis a cualquier PC del Mundo. 
Llamadas a fijos y móviles desde 1 céntimo por minuto. 
http://es.voice.yahoo.com