IRQ problem PCMCIA to IDE adapter

[Dominik Brodowski]

Hi,

On Wed, Jun 21, 2006 at 07:30:19PM -0400, Xavier Douville wrote:
> Hi
> 
> I just bought a cheap 16 bit PCMCIA IDE adapter.
> On Linux 2.6.12 and pcmcia-cs, everything works fine.
> But on Linux 2.6.16 and pcmciautils, I get an IRQ error (IRQ 17)
> I tried "exclude irq 17" in my config.opts without success.
> I am running Debian GNU/Linux testing on an Asus Z71A laptop.
> 
> xavier at laid1:~$ cat /proc/interrupts
>             CPU0
>    0:   27738043    IO-APIC-edge  timer
>    1:       2348    IO-APIC-edge  i8042
>    8:          5    IO-APIC-edge  rtc
>    9:     200820   IO-APIC-level  acpi
>   12:      26508    IO-APIC-edge  i8042
>   14:      62513    IO-APIC-edge  ide0
>   16:       7243   IO-APIC-level  yenta, Intel ICH6
>   17:          0   IO-APIC-level  yenta, uhci_hcd:usb3
>   18:      18684   IO-APIC-level  uhci_hcd:usb4, eth0, i915 at pci:0000:00:02.0
>   19:          2   IO-APIC-level  ohci1394, uhci_hcd:usb2
>   20:      44707   IO-APIC-level  uhci_hcd:usb1, ehci_hcd:usb5

That's on 2.6.16, I assume? What's /proc/interrupts like on 2.6.12?

	Dominik