kernel 2.6.15 - no high memory space available
Thomas Moritz
thm_ml at thmoritz.de
Tue Feb 21 06:41:37 EST 2006
Hello,
I have send a mail at 09.02.2006. Now I will send more info
about my problem.
Follow cards are running successful:
ModemCard 33.6
ISDNCard
IDE-Card 16MB
My SRamCard without filesystem, I can't to respond.
Could you please help me?
Regards Th. Moritz
/var/log/messages
-----------------
kernel: pccard: PCMCIA card inserted into slot 0
kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
kernel: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x903fffff
kernel: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
kernel: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
kernel: cs: warning: no high memory space available!
modinfo pcmcia
--------------
filename: /lib/modules/2.6.15-1-686/kernel/drivers/pcmcia/pcmcia.ko
author: David Hinds <dahinds at users.sourceforge.net>
description: PCMCIA Driver Services
license: GPL
alias: ds
vermagic: 2.6.15-1-686 686 gcc-4.0
depends: pcmcia_core,firmware_class
parm: io_speed:int
lsmod | grep pcmcia
-------------------
pcmcia 35708 0
firmware_class 9696 2 pcmcia,ipw2200
pcmcia_core 37872 3 pcmcia,yenta_socket,rsrc_nonstatic
pccardctl status
----------------
Socket 0:
5.0V 16-bit PC Card
Socket 1:
no card
lspci -vv
---------
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=03, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90000000-903fffff
Prefetchable memory behind bridge: 20000000-23ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:01:06.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
Subsystem: Hewlett-Packard Company: Unknown device 08bc
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 90180000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-21fff000 (prefetchable)
Memory window 1: 26000000-27fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:01:06.1 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
Subsystem: Hewlett-Packard Company: Unknown device 08bc
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 22000000-23fff000 (prefetchable)
Memory window 1: 28000000-29fff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:01:06.3 Mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an
Subsystem: Hewlett-Packard Company: Unknown device 08bc
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 90280000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
More information about the linux-pcmcia
mailing list