linux-image-2.6.15-1-686: no eth0 at all

Philippe Bourcier buffalo.phil at free.fr
Wed Feb 15 10:31:04 EST 2006


Package: linux-image-2.6.15-1-686
Version: 2.6.15-6
Severity: important


  I never got my system full usable since 2.6...
see #303550 and #321419 (pcmcia related problems)
now, let's try to go forward: I don't have any network


dmesg:

Linux version 2.6.15-1-686 (Debian 2.6.15-6) (fs at debian.org) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #1 Fri Feb 10 15:49:07 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e801: 0000000000100000 - 0000000008000000 (usable)
0MB HIGHMEM available.
128MB LOWMEM available.
On node 0 totalpages: 32768
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 28672 pages, LIFO batch:7
  HighMem zone: 0 pages, LIFO batch:0
DMI not present.
Allocating PCI resources starting at 10000000 (gap: 08000000:f8000000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro 
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01101000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 300.787 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 122548k/131072k available (1425k kernel code, 8012k reserved, 530k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 602.13 BogoMIPS (lpj=301068)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4387k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xeb080, last bus=0
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
PnPBIOS: PnP BIOS version 1.0, entry 0xec000:0x3d18, dseg 0xec000
PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1400-140f claimed by PIIX4 SMB
PIIX4 devres C PIO at 0398-0399
PIIX4 devres E PIO at 0800-0807
PIIX4 devres I PIO at 0200-0201
PIIX4 devres J PIO at 0388-038b
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
pnp: 00:01: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:01: ioport range 0x3f3-0x3f3 has been reserved
pnp: 00:01: ioport range 0x3f7-0x3f7 has been reserved
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
PCI: Bus 1, cardbus bridge: 0000:00:03.0
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 10000000-11ffffff
  MEM window: 12000000-13ffffff
PCI: Bus 5, cardbus bridge: 0000:00:03.1
  IO window: 00002000-000020ff
  IO window: 00002400-000024ff
  PREFETCH window: 14000000-15ffffff
  MEM window: 16000000-17ffffff
PCI: Found IRQ 11 for device 0000:00:03.0
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Found IRQ 11 for device 0000:00:03.1
PCI: Setting latency timer of device 0000:00:03.1 to 64
audit: initializing netlink socket (disabled)
audit(1140010665.559:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xc0000000, mapped to 0xc8880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:7648
vesafb: pmi: set display start = c00c76aa, set palette = c00c76f3
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000f300
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
usb 1-1: new full speed USB device using uhci_hcd and address 2
hda: IBM-DBCA-206480, ATA DISK drive
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.3: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: new full speed USB device using uhci_hcd and address 4
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-1.3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hda: max request size: 128KiB
hda: 12685680 sectors (6495 MB) w/420KiB Cache, CHS=13424/15/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input2
PCI: Found IRQ 11 for device 0000:00:03.0
Yenta: CardBus bridge found at 0000:00:03.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.0, mfunc 0xcba97543, devctl 0x62
Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000010
PCI: Found IRQ 11 for device 0000:00:03.1
Yenta: CardBus bridge found at 0000:00:03.1 [0000:0000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.1, mfunc 0xcba97543, devctl 0x62
Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000010
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
pccard: PCMCIA card inserted into slot 0
pccard: PCMCIA card inserted into slot 1
irda_init()
NET: Registered protocol family 23
input: PS/2 Logitech TouchPad 3 as /class/input/input3
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Real Time Clock Driver v1.12
Floppy drive(s): fd0 is 1.44M
floppy0: Floppy io-port 0x03f2 in use
gameport: NS558 PnP Gameport is pnp00:14/gameport0, io 0x201, speed 662kHz
mice: PS/2 mouse device common for all mice
cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x388-0x38f
cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x388-0x38f
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia1.0
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
pcmcia: registering new device pcmcia0.0
SCSI subsystem initialized
aha152x: resetting bus...
aha152x0: vital data: rev=1, io=0x340 (0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=100, extended translation=disabled
aha152x0: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 2.7 $
Adding 249440k swap on /dev/hda1.  Priority:-1 extents:1 across:249440k
EXT3 FS on hda2, internal journal
sb: Init: Starting Probe...
sb: Probing legacy card with io=220, irq=5, dma=3, dma16=5
SB 3.01 detected OK (220)
ESS chip ES1879 detected
sb: Turning on MPU
sb: Init: Done
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
ip_tables: (C) 2000-2002 Netfilter core team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (1024 buckets, 8192 max) - 232 bytes per conntrack
ipt_recent v0.3.1: Stephen Frost <sfrost at snowman.net>.  http://snowman.net/projects/ipt_recent/
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver


lshw:

ile.bourcier.hd.free.fr
    description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 1
          size: 128MB
     *-cpu
          product: Pentium II (Deschutes)
          vendor: Intel Corp.
          physical id: 2
          bus info: cpu at 0
          version: 6.5.2
          size: 300MHz
          width: 32 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
        *-cache:0
             description: L1 cache
             physical id: 0
             size: 32KB
        *-cache:1
             description: L2 cache
             physical id: 1
             size: 512KB
     *-pci
          description: Host bridge
          product: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled)
          vendor: Intel Corporation
          physical id: 0
          bus info: pci at 00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
        *-display
             description: VGA compatible controller
             product: ViRGE/MX+MV
             vendor: S3 Inc.
             physical id: 2
             bus info: pci at 00:02.0
             logical name: /dev/fb0
             version: 03
             size: 64MB
             width: 32 bits
             clock: 33MHz
             capabilities: vga bus_master cap_list fb
             configuration: depth=16 frequency=75.69Hz mode=1024x768 visual=truecolor xres=1024 yres=768
             resources: iomemory:c0000000-c3ffffff
        *-pcmcia:0
             description: CardBus bridge
             product: PCI1250
             vendor: Texas Instruments
             physical id: 3
             bus info: pci at 00:03.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pcmcia bus_master cap_list
             configuration: driver=yenta_cardbus
             resources: iomemory:18010000-18010fff irq:11
           *-pccard UNCLAIMED
                description: APA-1460 SCSI Host Adapter
                vendor: Adaptec, Inc.
                physical id: 0
                version: Version 0.01
                slot: Socket 0
                resources: irq:3
        *-pcmcia:1
             description: CardBus bridge
             product: PCI1250
             vendor: Texas Instruments
             physical id: 3.1
             bus info: pci at 00:03.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pcmcia bus_master cap_list
             configuration: driver=yenta_cardbus
             resources: iomemory:18011000-18011fff irq:11
           *-network
                description: Megahertz 3CXEM556 B
                vendor: 3Com
                physical id: 0
                version: LAN + 56k Modem
                slot: Socket 1
        *-isa UNCLAIMED
             description: ISA bridge
             product: 82371AB/EB/MB PIIX4 ISA
             vendor: Intel Corporation
             physical id: 7
             bus info: pci at 00:07.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
        *-ide
             description: IDE interface
             product: 82371AB/EB/MB PIIX4 IDE
             vendor: Intel Corporation
             physical id: 7.1
             bus info: pci at 00:07.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master
             configuration: driver=PIIX_IDE
             resources: ioport:3000-300f
           *-ide:0
                description: IDE Channel 0
                physical id: 0
                bus info: ide at 0
                logical name: ide0
                clock: 33MHz
              *-disk
                   description: ATA Disk
                   product: IBM-DBCA-206480
                   vendor: IBM
                   physical id: 0
                   bus info: ide at 0.0
                   logical name: /dev/hda
                   version: BC4OA87F
                   serial: HR0HRN20036
                   size: 6194MB
                   capacity: 6194MB
                   capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos
                   configuration: apm=off mode=udma2 smart=on
                 *-volume:0
                      description: Linux swap / Solaris partition
                      physical id: 1
                      bus info: ide at 0.0,1
                      logical name: /dev/hda1
                      capacity: 243MB
                      capabilities: primary nofs
                 *-volume:1
                      description: Linux filesystem partition
                      physical id: 2
                      bus info: ide at 0.0,2
                      logical name: /dev/hda2
                      capacity: 5950MB
                      capabilities: primary bootable
           *-ide:1
                description: IDE Channel 1
                physical id: 1
                bus info: ide at 1
                logical name: ide1
                clock: 33MHz
              *-cdrom
                   description: IDE CD-ROM
                   product: TOSHIBA CD-ROM XM-1802B
                   vendor: Toshiba
                   physical id: 0
                   bus info: ide at 1.0
                   logical name: /dev/hdc
                   version: 1119
                   capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio
                 *-disc
                      physical id: 0
                      logical name: /dev/hdc
        *-usb
             description: USB Controller
             product: 82371AB/EB/MB PIIX4 USB
             vendor: Intel Corporation
             physical id: 7.2
             bus info: pci at 00:07.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd
             resources: ioport:f300-f31f irq:11
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.15-1-686 uhci_hcd
                physical id: 1
                bus info: usb at 1
                logical name: usb1
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
              *-usb
                   description: USB hub
                   product: USB2.0 Hub Controller
                   vendor: NEC Corporation
                   physical id: 1
                   bus info: usb at 1:1
                   version: 1.00
                   capabilities: usb-2.00
                   configuration: driver=hub maxpower=100mA slots=4 speed=12.0MB/s
                 *-usb:0
                      description: Mouse
                      product: USB-PS/2 Optical Mouse
                      vendor: Logitech
                      physical id: 3
                      bus info: usb at 1:1.3
                      version: 20.00
                      capabilities: usb-2.00
                      configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
                 *-usb:1 UNCLAIMED
                      description: Generic USB device
                      product: CanoScan
                      vendor: Canon
                      physical id: 4
                      bus info: usb at 1:1.4
                      version: 1.00
                      capabilities: usb-1.00
                      configuration: maxpower=500mA speed=12.0MB/s
        *-bridge
             description: Bridge
             product: 82371AB/EB/MB PIIX4 ACPI
             vendor: Intel Corporation
             physical id: 7.3
             bus info: pci at 00:07.3
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: bridge
             configuration: driver=piix4_smbus
             resources: irq:9
  *-scsi
       physical id: 1
       bus info: scsi at 0
       logical name: scsi0
       capabilities: scsi-host
       configuration: driver=aha152x


lspci -vv:

0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32
	Region 0: Memory at <unassigned> (32-bit, prefetchable)

0000:00:02.0 VGA compatible controller: S3 Inc. ViRGE/MX+MV (rev 03) (prog-if 00 [VGA])
	Subsystem: S3 Inc. ViRGE/MX+MV
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (1000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
	Expansion ROM at 18000000 [disabled] [size=64K]
	Capabilities: <available only to root>

0000:00:03.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 18010000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
	Memory window 0: 10000000-11fff000 (prefetchable)
	Memory window 1: 12000000-13fff000
	I/O window 0: 00001800-000018ff
	I/O window 1: 00001c00-00001cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:00:03.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 18011000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
	Memory window 0: 14000000-15fff000 (prefetchable)
	Memory window 1: 16000000-17fff000
	I/O window 0: 00002000-000020ff
	I/O window 1: 00002400-000024ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 4: I/O ports at 3000 [size=16]

0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at f300 [size=32]

0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9


cat /proc/interrupts:

           CPU0       
  0:    1234984          XT-PIC  timer
  1:       1069          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  3:         19          XT-PIC  aha152x
  5:          3          XT-PIC  soundblaster
  7:          4          XT-PIC  parport0
  8:          4          XT-PIC  rtc
 11:       8369          XT-PIC  uhci_hcd:usb1, yenta, yenta
 12:        100          XT-PIC  i8042
 14:      11275          XT-PIC  ide0
 15:      10189          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0


hexdump /proc/bus/pci/00/03.0:

0000000 104c ac16 0007 0210 0002 0607 a808 0082
0000010 0000 1801 00a0 0200 0100 b004 0000 1000
0000020 f000 11ff 0000 1200 f000 13ff 1800 0000
0000030 18fc 0000 1c00 0000 1cfc 0000 010b 05c0
0000040 0000 0000 0001 0000 0000 0000 0000 0000
0000050 0000 0000 0000 0000 0000 0000 0000 0000
*
0000080


hexdump /proc/bus/pci/00/03.1:

0000000 104c ac16 0007 0210 0002 0607 a808 0082
0000010 1000 1801 00a0 0200 0500 b008 0000 1400
0000020 f000 15ff 0000 1600 f000 17ff 2000 0000
0000030 20fc 0000 2400 0000 24fc 0000 020b 05c0
0000040 0000 0000 0001 0000 0000 0000 0000 0000
0000050 0000 0000 0000 0000 0000 0000 0000 0000
*
0000080


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=fr_FR.UTF-8 at euro (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)

Versions of packages linux-image-2.6.15-1-686 depends on:
ii  initramfs-tools [linux-initra 0.51       tools for generating an initramfs
ii  module-init-tools             3.2.2-2    tools for managing Linux kernel mo
ii  yaird [linux-initramfs-tool]  0.0.12-3   Yet Another mkInitRD

Versions of packages linux-image-2.6.15-1-686 recommends:
ii  libc6-i686                    2.3.6-1    GNU C Library: Shared libraries [i

-- debconf information:
  linux-image-2.6.15-1-686/preinst/abort-install-2.6.15-1-686:
  linux-image-2.6.15-1-686/preinst/abort-overwrite-2.6.15-1-686:
  linux-image-2.6.15-1-686/preinst/bootloader-initrd-2.6.15-1-686: true
  linux-image-2.6.15-1-686/prerm/would-invalidate-boot-loader-2.6.15-1-686: true
  linux-image-2.6.15-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.15-1-686/preinst/lilo-initrd-2.6.15-1-686: true
  linux-image-2.6.15-1-686/postinst/old-initrd-link-2.6.15-1-686: true
  linux-image-2.6.15-1-686/postinst/old-dir-initrd-link-2.6.15-1-686: true
  linux-image-2.6.15-1-686/preinst/overwriting-modules-2.6.15-1-686: true
  linux-image-2.6.15-1-686/postinst/depmod-error-initrd-2.6.15-1-686: false
* linux-image-2.6.15-1-686/preinst/already-running-this-2.6.15-1-686:
  linux-image-2.6.15-1-686/preinst/initrd-2.6.15-1-686:
  linux-image-2.6.15-1-686/postinst/depmod-error-2.6.15-1-686: false
  linux-image-2.6.15-1-686/postinst/bootloader-error-2.6.15-1-686:
  linux-image-2.6.15-1-686/postinst/bootloader-test-error-2.6.15-1-686:
  linux-image-2.6.15-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.15-1-686/postinst/create-kimage-link-2.6.15-1-686: true
  linux-image-2.6.15-1-686/prerm/removing-running-kernel-2.6.15-1-686: true
  linux-image-2.6.15-1-686/preinst/failed-to-move-modules-2.6.15-1-686:
  linux-image-2.6.15-1-686/preinst/elilo-initrd-2.6.15-1-686: true
  linux-image-2.6.15-1-686/postinst/old-system-map-link-2.6.15-1-686: true

-- 
                                           /             \
                                          ((__-^^-,-^^-__))
 .''`.          Philippe BOURCIER          `-_---' `---_-'  .-.
: :' :  http://bourcier.philippe.online.fr  `--|o` 'o|--'   /V\
`. `'                                          \  `  /     // \\
  `-   Linux Counter registered user #290012    ): :(     /(   )\
                                                :o_o:      ^^-^^
                                                 "-"



More information about the linux-pcmcia mailing list