A big problem with pcmcia ...
David Andreoletti
david.andreoletti at gmail.com
Thu Feb 2 06:08:25 EST 2006
Good morning,
Since 4 months, i try to run my cardbus ( ENE CB 712/4 ) with a
netgear pcmcia card (WG511T revision C ).I think my cardbus is
recognise because dmeg says :
Yenta: CardBus bridge found at 0000:02:04.0 [1025:007a]
My madwifi drivers are compile and I think it works correctly :
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
wlan: 0.8.6.0 (EXPERIMENTAL)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
When I insert my pcmcia card, dmesg says me :
pccard: CardBus card inserted into slot 0
But when i try to get information about pcmcia card ,I have no information !
Howeover, I think the problem is here :
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please
expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
for details.
cs: IO port probe 0x100-0x4ff: excluding 0x3b0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
What do you think ?
Please help me !
NB : I am on Testing/Unstable with kernel 2.6.15 ( see file join )
I 'm sorry but english isn't my mother tong !
-------------- next part --------------
Module Size Used by
ipaq 30992 0
usbserial 27592 1 ipaq
sd_mod 17072 0
usb_storage 64864 0
nvidia 4088336 14
ipv6 221696 10
thermal 13416 0
fan 4580 0
button 6448 0
processor 22912 1 thermal
ac 4676 0
battery 9412 0
pcmcia 35708 2
nls_iso8859_1 3936 1
nls_cp437 5600 1
vfat 11584 1
fat 45980 1 vfat
ath_pci 69852 0
ath_rate_sample 13928 1 ath_pci
wlan 122972 2 ath_pci,ath_rate_sample
ath_hal 147984 2 ath_pci,ath_rate_sample
sr_mod 16260 0
sbp2 20996 0
ide_cd 36644 1
cdrom 33280 2 sr_mod,ide_cd
eth1394 18344 0
usbhid 32320 0
generic 4260 0 [permanent]
ahci 11844 0
i810_audio 31380 0
ac97_codec 17132 1 i810_audio
ipw2200 96140 0
ieee80211 29064 1 ipw2200
ieee80211_crypt 5344 1 ieee80211
joydev 8864 0
b44 22348 0
firmware_class 9696 2 pcmcia,ipw2200
yenta_socket 24972 3
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37872 3 pcmcia,yenta_socket,rsrc_nonstatic
mii 5056 1 b44
ohci1394 30164 0
ieee1394 88152 3 sbp2,eth1394,ohci1394
ehci_hcd 28904 0
ata_piix 8964 0
snd_intel8x0 29596 0
i2c_i801 7916 0
libata 51020 2 ahci,ata_piix
snd_intel8x0m 15788 0
snd_ac97_codec 82464 2 snd_intel8x0,snd_intel8x0m
snd_ac97_bus 2048 1 snd_ac97_codec
i2c_core 19280 1 i2c_i801
psmouse 32356 0
scsi_mod 125768 6 sd_mod,usb_storage,sr_mod,sbp2,ahci,libata
serio_raw 6468 0
rtc 11316 0
uhci_hcd 28016 0
intel_agp 20796 1
usbcore 113284 7 ipaq,usbserial,usb_storage,usbhid,ehci_hcd,uhci_hcd
snd_pcm 77576 3 snd_intel8x0,snd_intel8x0m,snd_ac97_codec
snd_timer 21316 1 snd_pcm
snd 48420 5 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
soundcore 8928 2 i810_audio,snd
snd_page_alloc 9928 3 snd_intel8x0,snd_intel8x0m,snd_pcm
agpgart 31400 2 nvidia,intel_agp
ext3 117768 2
jbd 48404 1 ext3
mbcache 8484 1 ext3
ide_disk 15712 5
ide_generic 1120 0 [permanent]
ide_core 112800 5 usb_storage,ide_cd,generic,ide_disk,ide_generic
evdev 8800 0
mousedev 10496 1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lspci-vvv
Type: application/octet-stream
Size: 15337 bytes
Desc: not available
Url : http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20060202/331dab10/lspci-vvv-0001.obj
-------------- next part --------------
bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515252k/524156k available (1425k kernel code, 8308k reserved, 530k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2995.58 BogoMIPS (lpj=1497794)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 1023k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe96c4, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: c0000000-cfffffff
PREFETCH window: 90000000-9fffffff
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0000a000-0000a0ff
IO window: 0000a400-0000a4ff
PREFETCH window: 80000000-81ffffff
MEM window: b2000000-b3ffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-bfff
MEM window: b0000000-bfffffff
PREFETCH window: 80000000-8fffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 169
audit: initializing netlink socket (disabled)
audit(1136922766.538:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 193
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
AZAL RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 ELAN MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 144k freed
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
input: AT Translated Set 2 keyboard as /class/input/input0
hdc: IC25N060ATMR04-0, ATA DISK drive
hdd: PIONEER DVD-RW DVR-K15RA, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 1024KiB
hdc: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 > hdc4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
hw_random: RNG not detected
usbcore: registered new driver usbfs
usbcore: registered new driver hub
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001200
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Real Time Clock Driver v1.12
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001220
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 217, io base 0x00001240
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001260
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1e.3 to 64
libata version 1.20 loaded.
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1e.2 to 64
usb 3-1: new low speed USB device using uhci_hcd and address 2
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 201, io mem 0x30000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ieee1394: Initialized config rom entry `ip1394'
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
usb 3-1: new low speed USB device using uhci_hcd and address 3
input: SynPS/2 Synaptics TouchPad as /class/input/input1
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
intel8x0_measure_ac97_clock: measured 50438 usecs
intel8x0: clocking to 48000
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 209
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
Intel 810 + AC97 Audio, version 1.01, 09:56:13 Jan 3 2006
ATA: abnormal status 0x7F on port 0x1F7
ata1: disabling port
scsi0 : ata_piix
ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 193
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[b0004000-b00047ff] Max Packet=[2048]
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Yenta: CardBus bridge found at 0000:02:04.0 [1025:007a]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
b44.c:v0.97 (Nov 30, 2005)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 233
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0f:b0:62:c8:66
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 50
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Yenta: ISA IRQ mask 0x0c78, PCI irq 169
Socket status: 30000020
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
cs: IO port probe 0xa000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xbfffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8fffffff
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pccard: CardBus card inserted into slot 0
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f54714012ca]
eth1394: $Rev: 1312 $ Ben Collins <bcollins at debian.org>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Adding 361420k swap on /dev/hdc6. Priority:-1 extents:1 across:361420k
EXT3 FS on hdc4, internal journal
hdd: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
wlan: 0.8.6.0 (EXPERIMENTAL)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0x100-0x4ff: excluding 0x3b0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005
usb 5-1: new high speed USB device using ehci_hcd and address 3
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 1 port detected
usb 5-1.1: new high speed USB device using ehci_hcd and address 4
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Corsair Model: Flash Voyager Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off
sda: Mode Sense: 00 26 00 00
sda: assuming drive cache: write through
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off
sda: Mode Sense: 00 26 00 00
sda: assuming drive cache: write through
sda: sda1
sd 1:0:0:0: Attached scsi removable disk sda
usb 2-1: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
ipaq 2-1:1.0: PocketPC PDA converter detected
usb 2-1: PocketPC PDA converter now attached to ttyUSB0
usbcore: registered new driver ipaq
usb 2-1: USB disconnect, address 2
ipaq ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0
ipaq 2-1:1.0: device disconnected
usb 2-1: new full speed USB device using uhci_hcd and address 3
ipaq 2-1:1.0: PocketPC PDA converter detected
usb 2-1: PocketPC PDA converter now attached to ttyUSB0
usb 2-1: USB disconnect, address 3
ipaq ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0
ipaq 2-1:1.0: device disconnected
usb 2-1: new full speed USB device using uhci_hcd and address 4
ipaq 2-1:1.0: PocketPC PDA converter detected
usb 2-1: PocketPC PDA converter now attached to ttyUSB0
usb 2-1: USB disconnect, address 4
ipaq ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0
ipaq 2-1:1.0: device disconnected
psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
More information about the linux-pcmcia
mailing list