[Bug 7706] New: PCMCIA bridge not working
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Mon Dec 18 13:21:39 EST 2006
http://bugzilla.kernel.org/show_bug.cgi?id=7706
Summary: PCMCIA bridge not working
Kernel Version: 2.6.18
Status: NEW
Severity: normal
Owner: linux-pcmcia at lists.infradead.org
Submitter: susemuse27 at gmx.de
Most recent kernel where this bug did *NOT* occur: 2.6.11
Distribution:SUSE 10.2
Hardware Environment: ASUS Laptop A4K, PCMCIA Modem Conceptronics
01:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: ASUSTeK Computer Inc. Asus A4K and Z81K notebooks, possibly
others ( mid-2005 machines )
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 177
Region 0: Memory at fd200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 60000000-61fff000 (prefetchable)
Memory window 1: fc600000-fd1ff000
I/O window 0: 0000c000-0000c0ff
I/O window 1: 0000c400-0000c4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Software Environment:SUSE 10.2
Problem Description:
Using standard boot options my cardbus bridge is "hidden behind...." :
...........
<4>PCI: Bus #03 (-#06) is hidden behind bridge #02 (-#03) (try 'pci=assign-busses')
<4>Please report the result to linux-kernel to fix this permanently
...........
so I added "pci=assign-busses" to the kernel boot line
var/log/boot.msg:
Inspecting /boot/System.map
Symbol table has incorrect version number.
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.18.2-34-default (geeko at buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000004ff40000 (usable)
<4> BIOS-e820: 000000004ff40000 - 000000004ff50000 (ACPI data)
<4> BIOS-e820: 000000004ff50000 - 0000000050000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<5>383MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 327488
<7> DMA zone: 4096 pages, LIFO batch:0
<7> Normal zone: 225280 pages, LIFO batch:31
<7> HighMem zone: 98112 pages, LIFO batch:31
<6>DMI 2.3 present.
<6>Using APIC driver default
<6>IO/L-APIC allowed because system is MP or new enough
<7>ACPI: RSDP (v000 ACPIAM ) @ 0x000f7550
<7>ACPI: RSDT (v001 A M I OEMRSDT 0x11000402 MSFT 0x00000097) @ 0x4ff40000
<7>ACPI: FADT (v001 A M I OEMFACP 0x11000402 MSFT 0x00000097) @ 0x4ff40200
<7>ACPI: MADT (v001 A M I OEMAPIC 0x11000402 MSFT 0x00000097) @ 0x4ff40390
<7>ACPI: OEMB (v001 A M I OEMBIOS 0x11000402 MSFT 0x00000097) @ 0x4ff50040
<7>ACPI: DSDT (v001 A4K-U A4K-U001 0x00000001 INTL 0x02002026) @ 0x00000000
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>ACPI: PM-Timer IO Port: 0x4008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 15:4 APIC version 16
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
<4>Detected 1795.355 MHz processor.
<4>Built 1 zonelists. Total pages: 327488
<5>Kernel command line: root=/dev/hda8 vga=0x317 pci=assign-busses
resume=/dev/hda5 splash=silent
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<7>spurious 8259A interrupt: IRQ7.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1291468k/1309952k available (1697k kernel code, 17188k reserved, 968k
data, 196k init, 392448k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 3593.14 BogoMIPS (lpj=7186298)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000
00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000
00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 1024K (64 bytes/line)
<7>CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 16k freed
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 2815k freed
<6>ACPI: Core revision 20060707
<4>CPU0: AMD Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 0a
<6>Total of 1 processors activated (3593.14 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
<6>Brought up 1 CPUs
<4>migration_cost=0
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:06:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC0] (gpe 37) interrupt mode.
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 17) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 19) *10
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *10
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 17) *11
<4>ACPI: PCI Interrupt Link [LUS0] (IRQs 20) *10
<4>ACPI: PCI Interrupt Link [LUS1] (IRQs 20) *11
<4>ACPI: PCI Interrupt Link [LUS2] (IRQs 20) *4
<4>ACPI: PCI Interrupt Link [LKLN] (IRQs 21) *0, disabled.
<4>ACPI: PCI Interrupt Link [LAUI] (IRQs 21) *5
<4>ACPI: PCI Interrupt Link [LKMO] (IRQs 20) *10
<4>ACPI: PCI Interrupt Link [LKSM] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LTID] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
<6>ACPI: Power Resource [GFAN] (off)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 13 devices
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
<3>PCI: Failed to allocate mem resource #10:2000000 at 0 for 0000:01:01.0
<4>PCI: Bus 2, cardbus bridge: 0000:01:01.0
<4> IO window: 0000c000-0000c0ff
<4> IO window: 0000c400-0000c4ff
<4> PREFETCH window: 60000000-61ffffff
<6>PCI: Bridge: 0000:00:0a.0
<6> IO window: c000-dfff
<6> MEM window: fba00000-feafffff
<6> PREFETCH window: 60000000-61ffffff
<6>PCI: Bridge: 0000:00:0b.0
<6> IO window: 9000-bfff
<6> MEM window: fb900000-fb9fffff
<6> PREFETCH window: db800000-eb7fffff
<7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) ->
IRQ 177
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<5>audit(1166375470.684:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total
65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: protected mode interface info at c000:563b
<6>vesafb: pmi: set display start = c00c56a9, set palette = c00c56e3
<6>vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749
bytes,<6>...found (1024x768, 46202 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LKMO] -> GSI 20 (level, low) ->
IRQ 185
<6>ACPI: PCI interrupt for device 0000:00:06.1 disabled
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Time: tsc clocksource has been installed.
<6>Freeing unused kernel memory: 196k freed
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<3>ACPI: Invalid PBLK length [0]
<6>ACPI: Thermal Zone [THRM] (48 C)
<6>NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
<6>NFORCE3-150: chipset revision 165
<6>NFORCE3-150: not 100% native mode: will probe irqs later
<4>NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
<6>NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
<6> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: ST9120821A, ATA DISK drive
<6>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
<6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 512KiB
<6>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
<7>Probing IDE interface ide1...
<4>hdd: TSSTcorpCD/DVDW SN-S082D, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>ACPI: Fan [FN00] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda8, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
<6>lp0: using parport0 (interrupt-driven).
<6>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
<6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
<6>usbcore: registered new driver usbfs
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>agpgart: Detected AGP bridge 0
<6>agpgart: Setting up Nforce3 AGP.
<6>agpgart: AGP aperture is 128M @ 0xf0000000
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<4>PCI: Enabling device 0000:00:06.0 (0001 -> 0003)
<4>ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, low) ->
IRQ 193
<7>PCI: Setting latency timer of device 0000:00:06.0 to 64
<6>usbcore: registered new driver hub
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>hdd: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>intel8x0_measure_ac97_clock: measured 56196 usecs
<6>intel8x0: clocking to 47462
<4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) ->
IRQ 185
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
<6>ohci_hcd 0000:00:02.0: irq 185, io mem 0xfebfb000
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 3 ports detected
<4>ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, low) ->
IRQ 185
<7>PCI: Setting latency timer of device 0000:00:02.1 to 64
<6>ohci_hcd 0000:00:02.1: OHCI Host Controller
<6>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:02.1: irq 185, io mem 0xfebfc000
<6>sdhci: Secure Digital Host Controller Interface driver, 0.12
<6>sdhci: Copyright(c) Pierre Ossman
<7>ieee1394: Initialized config rom entry `ip1394'
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:02.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 3 ports detected
<4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) ->
IRQ 185
<7>PCI: Setting latency timer of device 0000:00:02.2 to 64
<6>ehci_hcd 0000:00:02.2: EHCI Host Controller
<6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
<6>ehci_hcd 0000:00:02.2: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.2
<6>ehci_hcd 0000:00:02.2: irq 185, io mem 0xfebfdc00
<6>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:02.2
<6>usb 1-3: new full speed USB device using ohci_hcd and address 2
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 6 ports detected
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
<6>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 19 (level, low) ->
IRQ 201
<6>skge 1.6 addr 0xfeaf8000 irq 201 chip Yukon-Lite rev 7
<6>skge eth0: addr 00:11:2f:db:29:b0
<6>ACPI: PCI Interrupt 0000:01:01.1[B] -> Link [LNKC] -> GSI 19 (level, low) ->
IRQ 201
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201] MMIO=[feaff000-feaff7ff]
Max Packet=[2048] IR/IT contexts=[4/4]
<6>sdhci: SDHCI controller found at 0000:01:01.2 [1180:0822] (rev 17)
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
<6>ACPI: PCI Interrupt 0000:01:01.2[C] -> Link [LNKD] -> GSI 17 (level, low) ->
IRQ 209
<6>mmc0: SDHCI at 0xfeaff800 irq 209 DMA
<6>Yenta: CardBus bridge found at 0000:01:01.0 [1043:1987]
<6>Yenta: ISA IRQ mask 0x0438, PCI irq 177
<6>Socket status: 30000410
<6>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
<6>cs: IO port probe 0xc000-0xdfff: clean.
<6>pcmcia: parent PCI bridge Memory window: 0xfba00000 - 0xfeafffff
<6>pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff
<5>pccard: PCMCIA card inserted into slot 0
<6>cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff
0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
<5>pcmcia: registering new device pcmcia0.0
<6>usb 3-5: new high speed USB device using ehci_hcd and address 4
<6>Adding 3502128k swap on /dev/hda5. Priority:-1 extents:1 across:3502128k
<6>usb 3-5: new device found, idVendor=0457, idProduct=0162
<6>usb 3-5: new device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 3-5: configuration #1 chosen from 1 choice
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000323050e]
<6>usb 3-6: new high speed USB device using ehci_hcd and address 5
<6>usb 3-6: new device found, idVendor=05e3, idProduct=0702
<6>usb 3-6: new device strings: Mfr=0, Product=1, SerialNumber=0
<6>usb 3-6: Product: USB TO IDE
<6>usb 3-6: configuration #1 chosen from 1 choice
<6>ohci_hcd 0000:00:02.1: wakeup
<5>SCSI subsystem initialized
<6>usb 2-1: new full speed USB device using ohci_hcd and address 2
<6>Initializing USB Mass Storage driver...
<6>usb 2-1: new device found, idVendor=0763, idProduct=2006
<6>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: Transit USB
<6>usb 2-1: Manufacturer: M-Audio
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-2: new low speed USB device using ohci_hcd and address 3
<6>usb 2-2: new device found, idVendor=046d, idProduct=c016
<6>usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-2: Product: Optical USB Mouse
<6>usb 2-2: Manufacturer: Logitech
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 5
<7>usb-storage: waiting for device to settle before scanning
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new driver snd-usb-audio
<6>usbcore: registered new driver hiddev
<6>input: Logitech Optical USB Mouse as /class/input/input3
<6>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.1-2
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<5> Vendor: WDC WD80 Model: 0UE-00HCT0 Rev: 0811
<5> Type: Direct-Access ANSI SCSI revision: 00
<7>usb-storage: device scan complete
<5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
<4>sda: test WP failed, assume Write Enabled
<3>sda: assuming drive cache: write through
<5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
<4>sda: test WP failed, assume Write Enabled
<3>sda: assuming drive cache: write through
<6> sda: sda1
<5>sd 0:0:0:0: Attached scsi disk sda
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel at redhat.com
<6>loop: loaded (max 8 devices)
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>AppArmor: AppArmor initialized
<5>audit(1166375494.429:2): AppArmor initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sun Dec 17 17:11:14 2006
Trying manual resume from /dev/hda5
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading processor
Loading thermal
Loading amd74xx
Loading fan
Loading edd
Loading jbd
Loading mbcache
Loading ext3
Invoking userspace resume from /dev/hda5
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/hda5
Waiting for device /dev/hda8 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda8
/dev/hda8: clean, 125896/995520 files, 757188/1990044 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/hda8
Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Dec 17 18:11:19
2006
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
done
<notice>'boot.device-mapper start' exits with status 0
<notice>boot.md start
Starting MD Raid done
<notice>'boot.md start' exits with status 0
<notice>boot.lvm start
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
<notice>'boot.lvm start' exits with status 0
<notice>boot.localfs start
Checking file systems...
fsck 1.39 (29-May-2006)
/dev/hda1: clean, 105/122880 files, 58661/489948 blocks
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
/dev/hda3: 44378 files, 588081/1807433 clusters
/dev/hda6: clean, 221737/1205312 files, 1668702/2409742 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext2 (rw,acl,user_xattr)
/dev/hda3 on /xfer type vfat (rw,noexec,nosuid,nodev,umask=002,gid=100)
/dev/hda6 on /trans type ext3 (rw,noexec,nosuid,nodev,acl,user_xattr)
done<notice>'boot.localfs start' exits with status 0
<notice>boot.apparmor start
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
<notice>'boot.apparmor start' exits with status 0
<notice>boot.cleanup start
<notice>'boot.cleanup start' exits with status 0
<notice>boot.clock start
Setting up the hardware clockdone
<notice>'boot.clock start' exits with status 0
<notice>boot.klog start
Creating /var/log/boot.msg
done<notice>killproc: kill(869,29)
<notice>'boot.klog start' exits with status 0
<notice>boot.proc start
<notice>'boot.proc start' exits with status 0
<notice>boot.sysctl start
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
<notice>'boot.sysctl start' exits with status 0
<notice>boot.udev_retry start
<notice>'boot.udev_retry start' exits with status 0
<notice>boot.videobios start
<notice>'boot.videobios start' exits with status 0
<notice>boot.crypto start
<notice>'boot.crypto start' exits with status 0
<notice>boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>'boot.ipconfig start' exits with status 0
<notice>boot.localnet start
Setting up hostname 'linux-4ij6'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>'boot.localnet start' exits with status 0
<notice>boot.preload start
done
<notice>'boot.preload start' exits with status 0
<notice>boot.swap start
Activating remaining swap-devices in /etc/fstab...
done<notice>'boot.swap start' exits with status 0
<notice>SuSEfirewall2_init start
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning:
ip6tables does not support state matching. Extended IPv6 support disabled.
done
<notice>'SuSEfirewall2_init start' exits with status 0
<notice>boot.ldconfig start
<notice>'boot.ldconfig start' exits with status 0
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(869,3)
INIT:
Boot logging started on /dev/tty1(/dev/console) at Sun Dec 17 17:11:46 2006
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Entering runlevel: 5
Steps to reproduce:
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
More information about the linux-pcmcia
mailing list