Modem PC Card on Compaq nx6110: No serial port created
Pascal MALAISE
malaise at magic.fr
Wed Apr 5 16:23:36 EDT 2006
Dominik Brodowski wrote:
>>And serial_cs module is inserted. However, there is no ttyS0 registered.
>Is there another /dev/ttyS* with a different number which appears once you
>insert the card? I strongly doubt it, but...
No sorry. I have even tried ttyS0 to ttyS3 with minicom. There is
definitely no ttySx created, and, as far as I can see no trace from
serial_cs at all.
BTW, I have tried another card, a CardBus ethernet one. I get the
following messages, and the card works. So my problem seems to be
specific with PCMCIA serial cards.
Apr 5 22:13:58 localhost kernel: pccard: CardBus card inserted into slot 0
Apr 5 22:13:58 localhost kernel: 8139too Fast Ethernet driver 0.9.27
Apr 5 22:13:58 localhost kernel: PCI: Enabling device 0000:03:00.0
(0000 -> 0003)
Apr 5 22:13:58 localhost kernel: ACPI: PCI Interrupt 0000:03:00.0[A] ->
GSI 18 (level, low) -> IRQ 16
Apr 5 22:13:58 localhost kernel: eth1: RealTek RTL8139 at 0x3000,
00:40:f4:5d:7e:18, IRQ 16
Apr 5 22:13:58 localhost pci.agent[4789]: 8139too: loaded successfully
Apr 5 22:13:58 localhost kernel: 8139cp: 10/100 PCI Ethernet driver
v1.2 (Mar 22, 2004)
Apr 5 22:13:58 localhost pci.agent[4789]: 8139cp: loaded successfully
Apr 5 22:14:26 localhost kernel: eth1: link up, 100Mbps, full-duplex,
lpa 0x45E1
I can try any patch you suggest for my problem.
Thank's in advance.
Regards
--
Pascal MALAISE
(priv) mailto:malaise at magic.fr
(prof) mailto:pascal.malaise at thalesatm.com
More information about the linux-pcmcia
mailing list