pcmciautils works with hotplug, but not udev

[John H.]

hmm, it seems to work now.  however, if i remove pcmcia card, and put
it back in, it does not show up ... only after boot?

On 9/28/05, John H. <mistamaila at gmail.com> wrote:
> i will have to check, but I am assuming all pcmcia modules were
> loaded, as yenta-socket was loaded, as well as the wlan drivers for
> pcmcia.
>
> did not try pcmcia-socket-startup
>
> On 9/28/05, Dominik Brodowski <linux at dominikbrodowski.net> wrote:
> > Hi,
> >
> > Was also "pcmcia" loaded? And what about
> >
> > > > "pcmcia-socket-startup"
> >
> > ?
> >
> >         Dominik
> >
>