Help on a texas instruments pci7420 cardbus
Mårten Thomasson
marten.thomasson at bredband.net
Tue Sep 27 20:01:13 EDT 2005
Hello, I'd really appreciate some help...I've been working on this for days
and nights now, and its driving me crazy! I have recently bought a Proxim
Orinoco Gold 802.11 b/g pcmcia card, based on the atheros chipset, and I'm
trying to get it work on fedora core 4 2.6.12...
To get this working, I've tried the Madwifi drivers, but no matter how much
I try, I can't get the card to appear.
When I perform an lspci, its not listed. The same goes for iwconfig and
ifconfig.
I've cecked out many (too many!) sites, and tried to follow the advice, but
nothing works. Please, if someone here knows what to do...
I include the output from dmesg and lspci and /etc/pcmcia/config.opts, and
apologize for thereby creating a long mail.
Regards,
Marten
-----------------------------------------------------------------------
#
# Output from lspci
#
#----------------------------------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express
Root Port (rev 03)
00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 1 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge
(rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon
Mobility X600]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast
Ethernet Controller (rev 10)
06:00.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
06:00.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI
Two-Port PHY/Link-Layer Controller
06:00.3 Unknown mass storage controller: Texas Instruments PCI7420/PCI7620
Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port
PHY/Link-Layer Cont. an
06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
-----------------------------------------------------------------------
#
#/etc/pcmcia/config.opts
#
#----------------------------------------------------------------------
include port 0xfe00-0xfeff, memory 0xdb000-0xdbfff
exclude irq 10
device "ath_pci"
class "network"
module "ath_pci"
card "Orinoco Gold"
function network_adapter
bind "ath_pci"
-----------------------------------------------------------------------
#
# Output from dmesg
#
-----------------------------------------------------------------------
Linux version 2.6.12-1.1456_FC4 (bhcompile at tweety.build.redhat.com) (gcc
version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Thu Sep 22 02:11:40 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
BIOS-e820: 000000001fe90000 - 000000001fe9a000 (ACPI data)
BIOS-e820: 000000001fe9a000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
510MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 130704
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126608 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f65b0
ACPI: RSDT (v001 PTLTD HunterWD 0x06040000 LTP 0x00000000) @ 0x1fe90d57
ACPI: FADT (v001 LGE HunterWD 0x06040000 LGE 0x0000005f) @ 0x1fe99e88
ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1fe99efc
ACPI: HPET (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1fe99f64
ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1fe99f9c
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fe99fd8
ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20030224) @ 0x1fe915bd
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1fe91178
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1fe90fb8
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1fe90d9f
ACPI: DSDT (v001 LGE HUNTER 0x06040000 INTL 0x20030224) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ acpi=on rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c0459000 soft=c0458000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512804k/522816k available (2518k kernel code, 9388k reserved, 694k
data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 0ns tick, 3 64-bit timers
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1995.012 MHz processor.
Using hpet for high-res timesource
Calibrating delay loop... 3948.54 BogoMIPS (lpj=1974272)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000
00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000
00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000180
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c80)
checking if image is initramfs... it is
Freeing initrd memory: 1083k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=6
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [CTHT] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
Simple Boot Flag at 0x39 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1127871688.539:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1AA05E49AF1DE883
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 7 (level, low) ->
IRQ 7
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: Fan [FAN0] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (40 C)
ACPI: Thermal Zone [TZ2] (44 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 7 (level, low) ->
IRQ 7
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: FUJITSU MHT2080AH, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-L632B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 150095294 sectors (76848 MB)
native capacity is 156301488 sectors (80026 MB)
hda: Host Protected Area disabled.
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 > hda4
hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
LID0 PWRB AZAL RP01 PXS1 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 PCIB MPCI
MODM PS2K
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 184k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
floppy0: no floppy controllers found
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt 0000:06:02.0[A] -> Link [LNKC] -> GSI 7 (level, low) ->
IRQ 7
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
snd_hda_intel: Unknown parameter `'
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: no AFG node found
hw_random: RNG not detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb8004000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 7 (level, low) ->
IRQ 7
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 7, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
Yenta: CardBus bridge found at 0000:06:00.0 [1854:000e]
yenta 0000:06:00.0: Preassigned resource 0 busy, reconfiguring...
yenta 0000:06:00.0: Preassigned resource 1 busy, reconfiguring...
Yenta: ISA IRQ mask 0x0078, PCI irq 10
Socket status: 30000006
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins at debian.org>
ACPI: PCI Interrupt 0000:06:00.2[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[c4004000-c40047ff]
Max Packet=[2048]
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: string descriptor 0 read error: -32
input,hiddev96: USB HID v1.01 Keyboard [043e:9802] on usb-0000:00:1d.3-2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[56a0942500e09104]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03e6a40(lo)
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [AC] (on-line)
Using generic hotkey driver
ACPI: Battery Slot [CMB0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: Using generic hotkey driver
toshiba_acpi: Using generic hotkey driver
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
EXT3 FS on hda5, internal journal
Adding 2048248k swap on /dev/hda6. Priority:-1 extents:1
cs: IO port probe 0xfe00-0xfeff: clean.
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
application mixer_applet2 uses obsolete OSS audio interface
More information about the linux-pcmcia
mailing list