Compaq Armada V300, *** DANGER *** unable to remove socket power
Jarkko Haapalainen
johaapa at mail.student.oulu.fi
Tue May 10 15:35:05 EDT 2005
Hi!
I'm trying to resolve problem with my pcmcia network card (SMC). I have had read
known problems from http://kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
and have tried different kernel parameters like:
reserve=41100000,0x5000
reserve=41180000,0x5000
pci=noacpi
pci=routeirq,noacpi
.with no luck. When I put my network card to pcmcia slot I get "... *** DANGER
*** unable to remove socket power" error to kernel log.
My laptop is Compaq Armada V300 and I'm using SuSE Professional 9.3. Kernel is
default suse's kernel.
Can anyone help me with this? I'm not on the mailing list so please send copy of
your reply to me directly. Thanks!
Below are "dmesg", "/proc/iomem" and "lspci -vv" outputs.
Best regards,
Jarkko Haapalainen
Finland
DMESG
Linux version 2.6.11.4-20a-default (geeko at buildhost) (gcc version 3.3.5 20050117
(prerelease) (SUSE Linux)) #1 Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff3800 (reserved)
BIOS-e820: 0000000007ff3800 - 0000000008000000 (ACPI NVS)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32752
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28656 pages, LIFO batch:6
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ RSDTBL 0x00000001 CPQ 0x00000001) @ 0x07ff4800
ACPI: FADT (v001 COMPAQ CPQB151 0x20010721 CPQ 0x00000001) @ 0x07ff4828
ACPI: DSDT (v001 COMPAQ ARMADAE7 0x00010000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x5008
ACPI: local apic disabled
Allocating PCI resources starting at 08000000 (gap: 08000000:f8000000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x314 selinux=0 splash=silent
resume=/dev/hda1 reserve=0x3f6fb000,0x5000 showopts
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 8192 bytes)
Detected 465.597 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 124796k/131008k available (1865k kernel code, 5668k reserved, 659k data,
204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 921.60 BogoMIPS (lpj=460800)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Mendocino) stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1305k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI-0275: *** Warning: Unknown GPE method type: C16A (name not of form _Lxx
or _Exx)
ACPI-0275: *** Warning: Unknown GPE method type: C135 (name not of form _Lxx
or _Exx)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C005] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT]
ACPI: Power Resource [C129] (on)
ACPI: Power Resource [C0DB] (on)
ACPI: PCI Interrupt Link [C142] (IRQs *11)
ACPI: PCI Interrupt Link [C148] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [C149] (IRQs *11)
ACPI: PCI Interrupt Link [C14A] (IRQs *11)
ACPI: Power Resource [C15F] (off)
ACPI: Power Resource [C161] (off)
ACPI: Power Resource [C163] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev at oss.sgi.com cc hadi at cyberus.ca)
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x800-0x87f has been reserved
pnp: 00:0c: ioport range 0x4000-0x400f has been reserved
pnp: 00:0c: ioport range 0x5000-0x5063 could not be reserved
pnp: 00:0c: ioport range 0x6004-0x6005 could not be reserved
pnp: 00:0c: ioport range 0xf000-0xf0cf has been reserved
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1115673981.356:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0x40000000, mapped to 0xc8880000, using 3750k, total
4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:5074
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 39926
bytes,<6>...found (800x600, 25182 bytes, v3).
Console: switching to colour frame buffer device 99x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:C0D8,PNP0f0e:C0D9] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
PM: Checking swsusp image.
PM: Resume from disk failed.
ACPI wakeup devices:
C005 C0AE C14B C057 C16B
ACPI: (supports S0 S1 S3 S4 S4bios S5)
Freeing unused kernel memory: 204k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.1
Sensor: 22
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3420-0x3427, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: TOSHIBA MK6014MAP, ATA DISK drive
hdb: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 11733120 sectors (6007 MB), CHS=12416/15/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2
hdb: ATAPI 24X CD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
PM: Resume from disk failed.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
reiserfs: disabling flush barriers on hda2
ReiserFS: hda2: Using r5 hash to sort names
ReiserFS: hda2: Removing [50007 71729 0x0 SD]..done
ReiserFS: hda2: Removing [50007 71728 0x0 SD]..done
ReiserFS: hda2: There were 2 uncompleted unlinks/truncates. Completed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 248968k swap on /dev/hda1. Priority:42 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
hdb: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdb: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
cdrom: open failed.
Capability LSM initialized
ieee1394: Initialized config rom entry `ip1394'
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
smc9194: unsupported module, tainting kernel.
ACPI: PCI Interrupt Link [C149] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
es1968: clocking to 48000
parport: PnPBIOS parport detected.
pnp: Device 00:04 disabled.
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device c033d600(lo)
IPv6 over IPv4 tunneling driver
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: AGP aperture is 64M @ 0x50000000
ip6_tables: (C) 2000-2002 Netfilter core team
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
load_module: err 0xffffffef (dont worry)
load_module: err 0xffffffef (dont worry)
ACPI: PCI Interrupt Link [C142] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b121]
Yenta: ISA IRQ mask 0x0450, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:00:04.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:04.1 [0e11:b121]
Yenta: ISA IRQ mask 0x0450, PCI irq 11
Socket status: 30000006
load_module: err 0xffffffef (dont worry)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [C14A] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0x3400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1023 buckets, 8184 max) - 248 bytes per conntrack
SCSI subsystem initialized
st: Version 20041025, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Disabled Privacy Extensions on device c500ec00(sit0)
hdb: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdb: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
cdrom: open failed.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Non-volatile memory driver v1.2
ACPI: AC Adapter [C0F6] (on-line)
ACPI: Battery Slot [C0FE] (battery absent)
ACPI: Battery Slot [C0FF] (battery absent)
ACPI: Battery Slot [C100] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C057]
ACPI: Lid Switch [C16B]
ACPI: Fan [C15D] (off)
ACPI: Fan [C160] (off)
ACPI: Fan [C162] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [C0B4] (supports 8 throttling states)
ACPI: Thermal Zone [C15E] (55 C)
powernow: This module only works with AMD K7 CPUs
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
PCMCIA: socket c5829c2c: *** DANGER *** unable to remove socket power
unloading Kernel Card Services
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b121]
Yenta: ISA IRQ mask 0x0450, PCI irq 11
Socket status: 30000010
ACPI: PCI interrupt 0000:00:04.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:04.1 [0e11:b121]
yenta 0000:00:04.1: Preassigned resource 3 busy, reconfiguring...
Yenta: ISA IRQ mask 0x0450, PCI irq 11
Socket status: 30000006
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
PCMCIA: socket c5cd8c2c: *** DANGER *** unable to remove socket power
PCMCIA: socket c5cd8c2c: *** DANGER *** unable to remove socket power
PCMCIA: socket c5cd8c2c: *** DANGER *** unable to remove socket power
PCMCIA: socket c5cd8c2c: *** DANGER *** unable to remove socket power
PCMCIA: socket c5cd8c2c: *** DANGER *** unable to remove socket power
PCMCIA: socket c5cd8c2c: *** DANGER *** unable to remove socket power
usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using uhci_hcd and address 3
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: SanDisk Model: Cruzer Micro Rev: 0.2
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
subfs 0.9
/PROC/IOMEM
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-002d277e : Kernel code
002d277f-0037737f : Kernel data
07ff0000-07ff37ff : reserved
07ff3800-07ffffff : ACPI Non-volatile Storage
08000000-083fefff : PCI CardBus #02
08400000-087fefff : PCI CardBus #02
08800000-08bfefff : PCI CardBus #06
08c00000-08ffefff : PCI CardBus #06
3f6fb000-3f6fffff : reserved
40000000-410fffff : PCI Bus #01
40000000-40ffffff : 0000:01:00.0
40000000-403fffff : vesafb
41000000-41000fff : 0000:01:00.0
41100000-41101fff : 0000:00:04.0
41100000-41101fff : yenta_socket
41180000-41181fff : 0000:00:04.1
41180000-41181fff : yenta_socket
41200000-412000ff : 0000:00:09.0
50000000-53ffffff : 0000:00:00.0
LSPCI -VV
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
Subsystem: Compaq Computer Corporation Armada M700/E500
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+
<MAbort+ >SERR- <PERR+
Latency: 64
Region 0: Memory at 50000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3-
Rate=x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 40000000-410fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
0000:00:04.0 CardBus bridge: Unknown device 004c:ac1c (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device b121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 168, cache line size 20
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 41100000 (32-bit, non-prefetchable) [size=8K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 08000000-083fe000 (prefetchable)
Memory window 1: 08400000-087fe000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:00:04.1 CardBus bridge: Unknown device 004c:ac1c (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device b121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 168, cache line size 20
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 41180000 (32-bit, non-prefetchable) [size=8K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 08800000-08bfe000 (prefetchable)
Memory window 1: 08c00000-08ffe000
I/O window 0: 00004c00-00004cff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort+ <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 3420 [size=16]
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 3400 [size=32]
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
0000:00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev
10)
Subsystem: Compaq Computer Corporation Armada M700/E500
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Communication controller: Agere Systems (former Lucent
Microelectronics) WinModem 56k (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device b14e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 41200000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 3430 [size=8]
Region 2: I/O ports at 3800 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M
AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation Armada E500
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at 41000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW-
AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
More information about the linux-pcmcia
mailing list