pcmcia sram memory

[Pedro Burjack]

Hi, my name is Pedro

I'm using a Pretec SRAM 6MB in a distribuition called Conectiva 9 with 
kernel 2.4.
I only needed to install kernel-pcmcia-cs-3.2.3.rpm, modify 
/etc/pcmcia/config
inserting

card "Pretec"
    manfid 0x0000,0x0000
    bind "memory_cs"

and my card was reconized and I was using the kernel's module i82365 and 
device /dev/mem0c0b

Now I'm trying to use it in kernel 2.6.5 where I already compiled pcmcia 
support

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA_OBSOLETE=y
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=y
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y

When I try to up de service
#service pcmcia start
it shows the message
"Starting PCMCIA services: using yenta_socket instead of i82365.

and there is no device in /dev/mem0c0b.

Ah, I almost forgot I'm using pci cardbus
CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller

Thank you.

Pedro Burjack