AirPrime 5220 not detected on Sager 9860

[Scott R. Shinn]

No, nothing on this laptop heres the full list:

00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller
(rev 04)
00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
00:1b.0 Class 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High
Definition Audio Controller (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV41.8 (rev a2)
0a:00.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
0a:01.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
0a:02.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak
378/SATA 378) (rev 02)
0a:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
0a:05.0 Ethernet controller: Linksys, A Division of Cisco Systems
[AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)

on a different laptop (2.4 kernel, sager 5640) lspci -v shows the card
as:
06:00.0 USB Controller: Lucent Microelectronics USS-312 USB Controller
(rev 10) (prog-if 10 [OHCI])
        Subsystem: Lucent Microelectronics USS-312 USB Controller
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 



On Sat, 2005-06-25 at 10:24 -0700, David Hinds wrote:
> On Sat, Jun 25, 2005 at 04:35:16AM -0400, Scott R. Shinn wrote:
> > 
> > cardctl status returns:
> > Socket 0:
> >   3.3V CardBus card
> >   function 0: [ready]
> 
> The card appears to be detected correctly.
> 
> > cardctl ident:
> > Socket 0:
> >   no product info available
> 
> This is normal for many CardBus cards.
> 
> Does it show up in 'lspci'?
> 
> -- Dave
-- 
Scott R. Shinn <scott at atomicrocketturtle.com>