AirPrime 5220 not detected on Sager 9860

[Scott R. Shinn]

I've got a Sager model 9860 (Alienware 7700, Clevo D9T) laptop I'm
trying to debug issues EVDO Airprime 5220 cards. The card works
correctly in windows XP, however it is not detected at all on 2.6.11, or
2.6.12.1 in lspci according to the documentation here
http://www.ka9q.net/5220.html. I've tried this with various
configurations on FC3, gentoo and knoppix without any success, so I
suspect that this is related to getting the right config.opts settings.


The following is my cardbus data from lspci:

0a:00.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0900
        Flags: bus master, medium devsel, latency 168, IRQ 18
        Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
        Memory window 0: 80400000-807ff000 (prefetchable)
        Memory window 1: 80800000-80bff000
        I/O window 0: 00004800-000048ff
        I/O window 1: 00004c00-00004cff
        16-bit legacy interface ports at 0001

cardctl status returns:
Socket 0:
  3.3V CardBus card
  function 0: [ready]

cardctl info:

PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255


cardctl ident:
Socket 0:
  no product info available

and finally the config.opts configurations Ive tried:
include port 0x100-0x4ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
include memory 0x40000000-0x40000fff
and
include port 0x4800-0x48ff, port 0x4c00-0x4cff
include memory 0x80400000-0x807ff000, memory 0x80800000-0x80bff000



-- 
Scott R. Shinn <scott at atomicrocketturtle.com>