pd6729: infinite eventloop in interrupt

[John Heim]

I just installed the debian pre-compiled 2.6.11 kernel on my Gateway 2000 
Solo laptop. I am getting a streem of messages that say "pd6729: infinite 
eventloop in interrupt".

I created the file /etc/pcmcia.conf and added the line:
PCIC_OPTS="irq_mode=0"

But that did not help. I captured the output from lspci -v and grepped 
/var/log/messages for pd6729.  This output is below:

Grepping the log produced these 2 lines:

Jun 23 17:53:39 daisy kernel: pd6729: Cirrus PD6729 PCI to PCMCIA Bridge at 
0x10
00 on irq 0
Jun 23 17:53:39 daisy kernel: pd6729: ISA irqs = 3,9,10,11  polling status 
chang
es.


from lspci -v :



  82438MX Data Path (MTDP) (rev 02)t
         Flags: bus master, medium devsel, latency 32EISA
pd6729: infinite eventloop in interruptCI B

0000:00:01.0 Bridge: Intel Corp. 430MX - 82371MX Mobile PCI I/O IDE 
Xcelerator (
pd6729: infinite eventloop in interrupt PCI slot
MPIIX) (rev 03)
80)
         Flags: bus master, stepping, slow devsel, latency 0
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
         I/O behind bridge: 00000000-00000fff
         Memory behind bridge: 00000000-000fffff

0000:00:13.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev ee)
         Flags: stepping, slow devsel
         I/O ports at fcfc [size=4]

0000:00:14.0 VGA compatible controller: Cirrus Logic GD 7548 (prog-if 00 [VGA])
         Flags: fast devsel
         Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
         Memory at fd000000 (32-bit, non-prefetchable) [size=16M]

0000:01:0a.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev ee)
         Flags: stepping, slow devsel
         I/O ports at 1000

daisy:~# pd6729: infinite eventloop in interrupt
pd6729: infinite eventloop in interrupt
pd6729: infinite eventloop in interrupt
pd6729: infinite eventloop in interrupt