ne2k clone only working with pcmcia-cs

[Dominik Brodowski]

Hi,

On Thu, Jul 28, 2005 at 11:04:02PM +0200, Arne Ahrend wrote:
> My old PCMCIA ne2k compatible ethernet card reported by pccard ident as
> 
> Socket 0:
>   product info: "Ethernet", "Adapter", "2.0", ""
>   manfid: 0x0149, 0xc1ab
>   function: 6 (network)
> 
> cannot be used with the kernel and hotplug based PCMCIA support
> under 2.6.13-rc3, but gives the following messages in
> dmesg (I loaded the pcmcia module with pc_debug=5 to
> coax more information out of it):

Thanks for this excellent bug report.

Please remove this line from /etc/pcmcia/config.opts
> exclude port 0x220-0x22f, port 0x300-0x307, port 0x388-0x38f, port 0x800-0x807

and try to run
/sbin/pcmcia-socket-startup 0
manually.

Then check whether there is content in
/sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io and _mem,
please.

Thanks,
	Dominik