"unable to apply power" error

[David L. Martin]

On Mon, 2005-07-25 at 13:28 +0400, Ivan Kokshaysky wrote:
> On Sun, Jul 24, 2005 at 08:55:47PM +0100, Russell King wrote:
> > 00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 42) (prog-if 00 [Normal decode])
> > 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> 				       ^^^^^^^^^^^^^^
> The problem is here - configuration space of the cardbus card is
> inaccessible due to wrong subordinate bus number. Booting with the
> "pci=assign-busses" option should help.
Just tried it, same results.

Lets me give a few more observations.
If I insert the card (watching syslog), I see no change (nothing, it
doesn't seem to detect the card).

I then remove the card, same results ... nothing.

I insert the card again and get the "unable to apply power" error.

Two questions;
1. Is there anything else I can try (obvious).
2. Does anyone know how far back in versions I would have to go in order
to get this working again???