cs: pcmcia_socket1: unable to apply power.
HuamiSoft Hubert Sokolowski
h.sokolowski at huamisoft.com
Tue Jul 12 15:57:33 EDT 2005
HI!
I have a problem with AverMedia CardBus E-500 TV Tuner on a Gateway
Laptop. For the first time I plugged this card today it was detected but
now I only get this error 'cs: pcmcia_socket1: unable to apply power.'
I rebooted the computer but no difference.
Is there any known sollution to this problem?
Please send copy when you reply to me.
I am using ubuntu breezy with kernel 2.6.12.
the processor is intel centrino with 512MB of RAM
CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
lspci -vv output
lspci -vv
0000:00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02) Subsystem: Rioworks: Unknown
device 203a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz-
UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR-
<PERR- Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <available only to root>
0000:00:00.1 System peripheral: Intel Corporation 82852/82855
GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem:
Rioworks: Unknown device 203a Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- Latency: 0
0000:00:00.3 System peripheral: Intel Corporation 82852/82855
GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem:
Rioworks: Unknown device 203a Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- Latency: 0
0000:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
Integrated Graphics Device (rev 02) (prog-if 00 [VGA]) Subsystem:
Rioworks: Unknown device 203a Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable)
[size=512K] Region 2: I/O ports at 1800 [size=8]
Capabilities: <available only to root>
0000:00:02.1 Display controller: Intel Corporation 82852/855GM
Integrated Graphics Device (rev 02) Subsystem: Rioworks: Unknown
device 203a Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz-
UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Region 0: Memory at f0000000 (32-bit, prefetchable)
[size=128M] Region 1: Memory at e0080000 (32-bit,
non-prefetchable) [size=512K] Capabilities: <available only to
root>
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Rioworks: Unknown device 203a Control: I/O+
Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 4: I/O ports at 1820 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Rioworks: Unknown device 203a Control: I/O+
Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Rioworks: Unknown device 203a Control: I/O+
Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1860 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem:
Rioworks: Unknown device 203a Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin D routed to IRQ 3
Region 0: Memory at e0100000 (32-bit, non-prefetchable)
[size=1K] Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev
83) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC
Interface Bridge (rev 03) Control: I/O+ Mem+ BusMaster+
SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem:
Rioworks: Unknown device 203a Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable)
[size=1K]
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) Subsystem:
Rioworks: Unknown device 203a Control: I/O+ Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Rioworks: Unknown device 203a Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable)
[size=512] Region 3: Memory at e0100800 (32-bit,
non-prefetchable) [size=256] Capabilities: <available only to
root>
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00
[Generic]) Subsystem: Rioworks: Unknown device 2030
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at
2400 [size=256] Region 1: I/O ports at 2000 [size=128]
Capabilities: <available only to root>
0000:02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
Subsystem: Rioworks: Unknown device 203a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168 Interrupt: pin A routed to IRQ 11
Region 0: Memory at 20001000 (32-bit, non-prefetchable)
[size=4K] Bus: primary=02, secondary=03, subordinate=06,
sec-latency=176 Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+ 16-bit legacy interface ports at 0001
0000:02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
Subsystem: Rioworks: Unknown device 203a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168 Interrupt: pin B routed to IRQ 10
Region 0: Memory at 20002000 (32-bit, non-prefetchable)
[size=4K] Bus: primary=02, secondary=07, subordinate=0a,
sec-latency=176 Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt-
PostWrite+ 16-bit legacy interface ports at 0001
0000:02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394
Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Rioworks:
Unknown device 203a Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
>SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e0201000 (32-bit, non-prefetchable)
[size=2K] Capabilities: <available only to root>
0000:02:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10) Subsystem: Rioworks: Unknown
device 202d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz-
UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at e0201800 (32-bit, non-prefetchable)
[size=256] Capabilities: <available only to root>
0000:02:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG
(rev 05) Subsystem: Intel Corporation: Unknown device 2701
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 0x10 (64
bytes) Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0200000 (32-bit, non-prefetchable)
[size=4K] Capabilities: <available only to root>
I cannot compile cbdump so I cannot give the output of it.
the compiler says there is no pci/pci.h file. When I changed it to
<pci.h> and added a flag -I/usr/include/linux there are still errors
like
gcc -O2 -o cbdump cbdump.c -lpci -I/usr/include/linux
In file included from /usr/include/_G_config.h:44,
from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from cbdump.c:15:
/usr/include/gconv.h:72: error: parse error before "size_t"
/usr/include/gconv.h:88: error: parse error before "size_t"
/usr/include/gconv.h:97: error: parse error before "size_t"
/usr/include/gconv.h:174: error: parse error before "size_t"
/usr/include/gconv.h:177: error: parse error before '}' token
In file included from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from cbdump.c:15:
/usr/include/_G_config.h:47: error: field `__cd' has incomplete type
/usr/include/_G_config.h:50: error: field `__cd' has incomplete type
thanks in advance for any help.
--
HuamiSoft Hubert Sokolowski
http://www.huamisoft.com/
tel. (085) 7465779
kom. 501456743
More information about the linux-pcmcia
mailing list