cs: pcmcia_socket0: unable to apply power

Philip Hemptenmacher philip at hemptenmacher.de
Sun Jul 10 16:29:47 EDT 2005 

Dominik Brodowski wrote:

>Hi,
>
>On Mon, Jul 04, 2005 at 03:40:01PM +0200, Philip Hemptenmacher wrote:
>  
>
>>Hi, thanks for reply.
>>My system is a old Sony Vaio Laptop with a PIII on a 2.6.11-10 Kernel
>>and a Ricoh RL5c476 bridge.
>>    
>>
>
>Please post the output of dmesg, /proc/ioports and /proc/iomem
>
>	Dominik
>
>_______________________________________________
>Linux PCMCIA reimplementation list
>http://lists.infradead.org/mailman/listinfo/linux-pcmcia
>
>  
>
Hi!
Here is some more information about my system as requested.


-------------- next part --------------
Linux version 2.6.12-mm2 (root at petruschka) (gcc version 3.3.5) #2 Sun Jul 10 18:29:54 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
 BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
 BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
 BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable)
 BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65408
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61312 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6c90
ACPI: RSDT (v001 SONY   C0       0x20020815 PTL  0x00000000) @ 0x0fefa69d
ACPI: FADT (v001   SONY       C0 0x20020815 PTL  0x01000000) @ 0x0fefef64
ACPI: BOOT (v001   SONY       C0 0x20020815 PTL  0x00000001) @ 0x0fefefd8
ACPI: DSDT (v001   SONY       C0 0x20020815 PTL  0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 10000000 (gap: 10000000:ef800000)
Built 1 zonelists
Initializing CPU#0
Kernel command line: BOOT_IMAGE=Linux_2.6.12p ro root=305
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 861.807 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254596k/261632k available (2534k kernel code, 6392k reserved, 990k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1724.96 BogoMIPS (lpj=3449923)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) III Mobile CPU       866MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Simple Boot Flag at 0x36 set to 0x1
inotify device minor=63
Initializing Cryptographic API
vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, using 3072k, total 16320k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:52a4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
cn_fork is registered
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
hostap_crypt: registered algorithm 'NULL'
hostap_crypt: registered algorithm 'WEP'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK23CA-15, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 29498112 sectors (15103 MB) w/512KiB Cache, CHS=29264/16/63, UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2 < hda5 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 1.11 loaded.
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
Using IPI Shortcut mode
ACPI wakeup devices: 
PWRB USB1 USB2 USB3  LAN  EC0 COMA MODE 
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
input: PS/2 Generic Mouse on isa0060/serio1
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 180k freed
Adding 506008k swap on /dev/hda1.  Priority:-1 extents:1
Intel ISA PCIC probe: not found.
Device 'i82365.0' does not have a release() function, it is broken and must be fixed.
Badness in device_release at drivers/base/core.c:83
 [<c020a498>] kobject_cleanup+0x98/0xa0
 [<c020a4a0>] kobject_release+0x0/0x10
 [<c020aef5>] kref_put+0x45/0xd0
 [<c020a4cf>] kobject_put+0x1f/0x30
 [<c020a4cf>] kobject_put+0x1f/0x30
 [<c020a4a0>] kobject_release+0x0/0x10
 [<d08683a6>] init_i82365+0x1b6/0x1cc [i82365]
 [<c0135318>] sys_init_module+0x148/0x1f0
 [<c01031f5>] syscall_call+0x7/0xb
Databook TCIC-2 PCMCIA probe: not found.
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
Yenta: CardBus bridge found at 0000:02:05.0 [104d:80e7]
Yenta: ISA IRQ mask 0x0c38, PCI irq 9
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x403f
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
Yenta: CardBus bridge found at 0000:02:05.1 [104d:80e7]
Yenta: ISA IRQ mask 0x0c38, PCI irq 9
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x403f
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2044 buckets, 16352 max) - 212 bytes per conntrack
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw at saw.sw.com.sg> and others
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
eth0: 0000:02:08.0, 08:00:46:43:CB:0D, IRQ 9.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 47448 usecs
intel8x0: clocking to 48000
hw_random hardware driver 1.0.0 loaded
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801CA/CAM USB (Hub #2)
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801CA/CAM USB (Hub #3)
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840
usb 1-2: new low speed USB device using uhci_hcd and address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
input: Microsoft Microsoft Wheel Mouse Optical® on usb-0000:00:1d.0-2
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  Vendor: Sony      Model: MSC-U02           Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
sda: Unit Not Ready, sense:
: Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
Device  not ready.
Device  not ready.
Device  not ready.
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08 
sd: Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
sda: Write Protect is on
sda: Mode Sense: 00 6a 11 80
sda: assuming drive cache: write through
sda: Unit Not Ready, sense:
: Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
Device  not ready.
Device  not ready.
Device  not ready.
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08 
sd: Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
sda: Write Protect is on
sda: Mode Sense: 00 6a 11 80
sda: assuming drive cache: write through
ioctl_internal_command: <0 0 0 0> return code = 8000002
   : Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
sda: Unit Not Ready, sense:
: Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
Device  not ready.
Device  not ready.
Device  not ready.
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08 
sd: Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
sda: Write Protect is on
sda: Mode Sense: 00 6a 11 80
sda: assuming drive cache: write through
 sda:<3>Buffer I/O error on device sda, logical block 0
Buffer I/O error on device sda, logical block 0
 unable to read partition table
ioctl_internal_command: <0 0 0 0> return code = 8000002
   : Current: sense key=0x0
    ASC=0x0 ASCQ=0x0
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
usb-storage: device scan complete
mtrr: no more MTRRs available
mtrr: no more MTRRs available
PCI: Failed to allocate mem resource #0:2000 at d0260000 for 0000:07:00.0
ndiswrapper version 1.2 loaded (preempt=yes,smp=no)
ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
PCI: Device 0000:07:00.0 not available because of resource collisions
ndiswrapper (ndiswrapper_add_pci_device:192): couldn't enable PCI device: ffffffea
ndiswrapper: probe of 0000:07:00.0 failed with error -22
-------------- next part --------------
00000000-0009e7ff : System RAM
0009e800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000d8000-000dffff : reserved
000f0000-000fffff : System ROM
00100000-0feeffff : System RAM
  00100000-0037995e : Kernel code
  0037995f-0047137f : Kernel data
0fef0000-0fefefff : ACPI Tables
0feff000-0fefffff : ACPI Non-volatile Storage
0ff00000-0ff7ffff : System RAM
0ff80000-0fffffff : reserved
10000000-103fffff : PCI CardBus #03
10400000-107fffff : PCI CardBus #07
d0204000-d0204fff : eepro100
d0206000-d0206fff : yenta_socket
d0207000-d0207fff : yenta_socket
d8000000-d8feffff : vesafb
ff800000-ffbfffff : reserved
fffffc00-ffffffff : reserved
-------------- next part --------------
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03e0-03e1 : $Ā
É4$‹D$$‰D$è0ÿÿÿ1Ò
ÀtÜ‹º€
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
  1000-107f : motherboard
    1000-1003 : PM1a_EVT_BLK
    1004-1005 : PM1a_CNT_BLK
    1008-100b : PM_TMR
    1020-1020 : PM2_CNT_BLK
    1028-102b : GPE0_BLK
    102c-102f : GPE1_BLK
1180-11bf : 0000:00:1f.0
  1180-11bf : motherboard
1800-181f : uhci_hcd
1820-183f : uhci_hcd
1840-185f : uhci_hcd
1860-1867 : ide0
1868-186f : ide1
18c0-18ff : Intel 82801CA-ICH3
1c00-1cff : Intel 82801CA-ICH3
4000-403f : eepro100
fe00-fe01 : motherboard
fe10-fe17 : motherboard

More information about the linux-pcmcia mailing list