ENE CB1410 - No Interrupts
dean ramsden
dean at deanramsden.ndo.co.uk
Thu Feb 24 01:14:44 EST 2005
Hi,
I am running Suse 9.2 and whenever I boot into linux I get a message that
says 'the kernel is disabling IRQ9'. I believe this is the ENE CB1410 cardbus
controller and explains why even though the WiFi card is configured correctly
I am unable to get power to the card.
Could anybody please tell me how to fix this as I am in completely over my
head here.
I have included dmesg, /proc/ioport & /proc/iomem.
dmesg:
weaner at linux:~> dmesg
Linux version 2.6.8-24.11-default (geeko at buildhost) (gcc version 3.3.4 (pre
3.3.5 20040809)) #1 Fri Jan 14 13:01:26 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data)
BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
128MB vmalloc/ioremap area available.
63MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 245744
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 16368 pages, LIFO batch:3
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e5010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x3bffcb80
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x3bfffaa0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x3bfffb90
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x3bfffbc0
ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x3bfffb30
ACPI: DSDT (v001 INSYDE K8N800 0x00001000 INTL 0x02002036) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=0x317 selinux=0 resume=/dev/hda2
desktop elevator=as splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1804.445 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 969156k/982976k available (2076k kernel code, 13224k reserved, 780k
data, 212k init, 65472k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3571.71 BogoMIPS (lpj=1785856)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 1172k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe88e4, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 14 15) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
TC classifier action (bugs to netdev at oss.sgi.com cc hadi at cyberus.ca)
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1109224450.4294967243:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.2, from 9 to 11
PCI: Via IRQ fixup for 0000:00:11.6, from 9 to 11
vesafb: framebuffer at 0xa4000000, mapped to 0xf8880000, using 6144k, total
65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:a15f
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007
bytes,<6>...found (1024x768, 21643 bytes, v3).
Console: switching to colour frame buffer device 127x43
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9808210A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY DVD RW DW-D56A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 151395072 sectors (77514 MB)
native capacity is 156301488 sectors (80026 MB)
hda: Host Protected Area disabled.
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 15
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio3
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda2
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
SBTN USB0 USB1 USB2 EHCI AC97 MC97 LAN0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block
18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 1052248k swap on /dev/hda2. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xe200, 00:40:d0:6a:ae:33, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
evdev_connect: evdev c187bec0 handle c187bedc name event0
evdev_connect: evdev c187d840 handle c187d85c name event1
evdev_connect: evdev c187d940 handle c187d95c name event2
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block
18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
subfs 0.9
NET: Registered protocol family 23
module via_ircc unsupported by SUSE/Novell, tainting kernel.
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:00:09.0 [1071:8399]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:09.0, mfunc 0x01021002, devctl 0x44
Yenta TI: socket 0000:00:09.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:00:09.0 no PCI interrupts. Fish. Please report.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: 64346c35
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 11, io base 00001200
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.11-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 10, io base 00001300
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24.11-default uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 11, io base 00001700
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24.11-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 7, pci mem f8866000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24.11-default ehci_hcd
usb usb4: SerialNumber: 0000:00:10.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Maximum main memory to use for agp memory: 878M
agpgart: AGP aperture is 256M @ 0xb0000000
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f760(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
Disabled Privacy Extensions on device f7938800(sit0)
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7679 buckets, 61432 max) - 336 bytes per conntrack
ip6_conntrack version 0.1 (7679 buckets, 61432 max) - 208 bytes per conntrack
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
NET: Registered protocol family 17
eth0: no IPv6 routers present
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Processor [CPU0] (supports C1 C2)
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x18 (950 mV)
powernow-k8: cpu_init done, current fid 0xa, vid 0x6
lp: driver loaded but no devices found
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
bootsplash: status on console 0 changed to on
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
cs: pcmcia_socket0: unsupported voltage key.
PCMCIA: socket f795802c: *** DANGER *** unable to remove socket power
irq 9: nobody cared!
[<c010868c>] __report_bad_irq+0x1c/0x70
[<c010875b>] note_interrupt+0x5b/0x80
[<c010894c>] do_IRQ+0xdc/0x120
[<c0106cd8>] common_interrupt+0x18/0x20
handlers:
[<c01f0bba>] (acpi_irq+0x0/0x14)
Disabling IRQ #9
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
weaner at linux:~>
/proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3bfeffff : System RAM
00100000-0030724c : Kernel code
0030724d-003ca37f : Kernel data
3bff0000-3bffffbf : ACPI Tables
3bffffc0-3bffffff : ACPI Non-volatile Storage
3c000000-3c000fff : 0000:00:09.0
3c000000-3c000fff : yenta_socket
3c400000-3c7fffff : PCI CardBus #02
3c800000-3cbfffff : PCI CardBus #02
a0000000-afffffff : PCI Bus #01
a4000000-a7ffffff : 0000:01:00.0
a4000000-a7ffffff : vesafb
b0000000-bfffffff : 0000:00:00.0
b0000000-bfffffff : aperture
e0000000-efffffff : PCI Bus #01
e1000000-e1ffffff : 0000:01:00.0
f0000000-f0001fff : 0000:00:0a.0
f0002000-f00020ff : 0000:00:10.3
f0002000-f00020ff : ehci_hcd
f0002100-f00021ff : 0000:00:12.0
f0002100-f00021ff : via-rhine
fff80000-ffffffff : reserved
/proc/ioport
0000-001f : dma1
0020-0021 : pic1
0022-0022 : PM2_CNT_BLK
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-107f : motherboard
1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1008-100b : PM_TMR
1010-1015 : ACPI CPU throttle
1020-1023 : GPE0_BLK
1100-110f : 0000:00:11.1
1100-1107 : ide0
1108-110f : ide1
1200-121f : 0000:00:10.0
1200-121f : uhci_hcd
1300-131f : 0000:00:10.1
1300-131f : uhci_hcd
1400-140f : motherboard
1600-167f : motherboard
1700-171f : 0000:00:10.2
1700-171f : uhci_hcd
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
c000-dfff : PCI Bus #01
e000-e0ff : 0000:00:11.5
e000-e0ff : VIA8233
e100-e1ff : 0000:00:11.6
e200-e2ff : 0000:00:12.0
e200-e2ff : via-rhine
Thanks in advance,
Dean
More information about the linux-pcmcia
mailing list