Yenta TI: socket 0000:00:0c.0 probing PCI interrupt failed on ARM Integrator/AP

[Itzhak Ben-Akiva]

Hi all,

Already one week that I have been working hard to make my pcmcia
bluetooth card to work on an ARM Integrator/AP Board. I have "googled"
all around, but I haven't found no solution/clue etc that helped me
solving my problem. I copied below the error I get from Yenta. I tried
kernels 2.6.12-5 and 2.6.13-rc7 with identical results.

I have no idea how to solve this. Therefore, I appreciate any help that
could help me to solve this damned problem quickly.

PCI: enabling device 0000:00:0c.0 (0140 -> 0143)
Yenta: CardBus bridge found at 0000:00:0c.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001c02, devctl 0x62
Yenta TI: socket 0000:00:0c.0 probing PCI interrupt failed, trying to
fix
Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: ffffffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x4fffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5fffffff


many thanks,
Itzhak