No power applied to wireless lan card?

[Marc McGuinness]

Hello,

I can't get my wireless orinoco gold card going. No live cds
(knoppix/ubuntu) in their latest versions could get it running. The LEDs
on the pcmcia card always stay switched off. Unfortunately I can't find
an error message regarding a power problem anywhere and it's the only
pcmcia card available for me. The card works fine on windows on the same
machine.

This is the output while the card is inserted into the notebook:

=========================================================================
# cardctl status
Socket 0:
   5V 16-bit PC Card
   function 0: [ready]
=========================================================================
# lspci -vv -s 00:0a.0
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
         Subsystem: Elitegroup Computer Systems: Unknown device b732
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 168, Cache Line Size: 0x20 (128 bytes)
         Interrupt: pin A routed to IRQ 9
         Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
         Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
         Memory window 0: 20400000-207ff000 (prefetchable)
         Memory window 1: 20800000-20bff000
         I/O window 0: 00004000-000040ff
         I/O window 1: 00004400-000044ff
         BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
PostWrite+
         16-bit legacy interface ports at 0001
=========================================================================
# cat /proc/interrupts
            CPU0
   0:    7760683          XT-PIC  timer
   1:       4263          XT-PIC  i8042
   2:          0          XT-PIC  cascade
   4:      37007          XT-PIC  eth0
   5:     455013          XT-PIC  radeon at PCI:1:0:0
   7:          2          XT-PIC  parport0
   8:          1          XT-PIC  rtc
   9:          8          XT-PIC  yenta, ohci1394
  10:          2          XT-PIC  ohci_hcd, SiS 7012, SiS SI7013 Modem,
ehci_hcd
  11:      14186          XT-PIC  acpi, ohci_hcd, ohci_hcd
  12:         66          XT-PIC  i8042
  14:      24626          XT-PIC  ide0
  15:         22          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0
=========================================================================
# dmesg | grep Yenta
Yenta: CardBus bridge found at 0000:00:0a.0 [1019:b732]
Yenta: adjusting diagnostic: 40 -> 60
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x000c1002, devctl 0x44
Yenta: ISA IRQ mask 0x0000, PCI irq 9
=========================================================================
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
04d0-04d1 : pnp 00:0b
0778-077a : parport0
0cf8-0cff : PCI conf1
1000-100f : 0000:00:02.5
   1000-1007 : ide0
   1008-100f : ide1
1080-10ff : 0000:00:02.6
   1080-10ff : SiS SI7013 Modem
1400-14ff : 0000:00:02.6
   1400-14ff : SiS SI7013 Modem
1800-18ff : 0000:00:02.7
   1800-18ff : SiS 7012
1c00-1c7f : 0000:00:02.7
   1c00-1c3f : SiS 7012
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
8000-808f : motherboard
   8000-807f : motherboard
     8000-8003 : PM1a_EVT_BLK
     8004-8005 : PM1a_CNT_BLK
     8008-800b : PM_TMR
     8020-8023 : GPE0_BLK
     8030-8033 : GPE1_BLK
8090-80ff : motherboard
   80ff-80ff : pnp 00:0b
8100-811f : 0000:00:02.1
   8100-811f : pnp 00:0b
9000-9fff : PCI Bus #01
   9000-90ff : 0000:01:00.0
e000-e0ff : 0000:00:04.0
   e000-e0ff : sis900
fe00-fe00 : motherboard
=========================================================================
# cat /proc/iomem
00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cefff : Video ROM
000d0000-000d7fff : reserved
000d8000-000e1fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1fdeffff : System RAM
   00100000-002bdddc : Kernel code
   002bdddd-003a66ff : Kernel data
1fdf0000-1fdfafff : ACPI Tables
1fdfb000-1fdfffff : ACPI Non-volatile Storage
1fe00000-1fffffff : reserved
20000000-20000fff : 0000:00:0a.0
   20000000-20000fff : yenta_socket
20400000-207fffff : PCI CardBus #02
20800000-20bfffff : PCI CardBus #02
a0000000-a0000fff : pcmcia_socket0
e0000000-e7ffffff : 0000:00:00.0
e8000000-e8000fff : 0000:00:02.3
   e8000000-e80007ff : ohci1394
e8001000-e8001fff : 0000:00:03.0
   e8001000-e8001fff : ohci_hcd
e8002000-e8002fff : 0000:00:03.1
   e8002000-e8002fff : ohci_hcd
e8003000-e8003fff : 0000:00:03.2
   e8003000-e8003fff : ohci_hcd
e8004000-e8004fff : 0000:00:03.3
   e8004000-e8004fff : ehci_hcd
e8005000-e8005fff : 0000:00:04.0
   e8005000-e8005fff : sis900
e8100000-e81fffff : PCI Bus #01
   e8100000-e810ffff : 0000:01:00.0
f0000000-f7ffffff : PCI Bus #01
   f0000000-f7ffffff : 0000:01:00.0
     f0000000-f02fffff : vesafb
fff80000-ffffffff : reserved
=========================================================================

Any ideas?

Marc