Failure to detect card ins/rem with pd6729

[Mikhail Degtiarev (Michael)]

 Ok, /proc/interrupts file with pd6729 already in kernel and with one card in socket, 
but before starting cardmgr, looks like this :

           CPU0
  0:     191349          XT-PIC  timer
  1:        647          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:          1          XT-PIC  soundblaster
  9:          0          XT-PIC  pd6729
 12:         58          XT-PIC  i8042
 14:      14023          XT-PIC  ide0
NMI:          0
ERR:          0

after starting cardmgr, like this:

           CPU0
  0:     485800          XT-PIC  timer
  1:        890          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:          1          XT-PIC  soundblaster
  9:          0          XT-PIC  pd6729, 3c589_cs
 12:        100          XT-PIC  i8042
 14:      14543          XT-PIC  ide0
NMI:          0
ERR:          0

removing, inserting the first card and inserting the second does not change anything.
and finally after "cardctl insert 0" for second card, like this:

           CPU0
  0:     633033          XT-PIC  timer
  1:       1070          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:          1          XT-PIC  soundblaster
  9:          0          XT-PIC  pd6729, 3c589_cs, eth1
 12:        114          XT-PIC  i8042
 14:      14921          XT-PIC  ide0
NMI:          0
ERR:          0

so, no count increments, whatever that mean.
 Also, I tried to insert i82365 under 2.4.26 with irq_mode=1, and this one i got:
 
Sep 17 00:26:43 (none) kernel: Linux PCMCIA Card Services 3.2.8
Sep 17 00:26:43 (none) kernel:   kernel build: 2.4.26 #3 Sat Aug 7 04:36:18 YEKST 2004
Sep 17 00:26:43 (none) kernel:   options:  [pci] [cardbus] [apm]
Sep 17 00:26:43 (none) kernel: Intel ISA/PCI/CardBus PCIC probe:
Sep 17 00:26:43 (none) kernel:   Cirrus PD6729 rev 00 PCI-to-PCMCIA at slot 00:13, port 0x3e0
Sep 17 00:26:43 (none) kernel:     host opts [0]: [ring] [pci irq 9] [1/3/0] [1/9/0]
Sep 17 00:26:43 (none) kernel:     host opts [1]: [ring] [pci irq 9] [1/3/0] [1/9/0]
Sep 17 00:26:43 (none) kernel:     PCI card interrupts, PCI status changes

 but, no card insertion/removal events :), only after "cardctl insert" it was like:
   
Sep 17 00:30:08 (none) kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
Sep 17 00:30:08 (none) kernel: cs: IO port probe 0x0230-0x0387: clean.
Sep 17 00:30:08 (none) kernel: eth0: 3Com 3c562, io 0x300, irq 9, hw_addr 00:60:97:FF:B7:08
Sep 17 00:30:08 (none) kernel:   8K FIFO split 5:3 Rx:Tx, auto xcvr
Sep 17 00:30:08 (none) kernel: ttyS03 at port 0x02e8 (irq = 9) is a 16550A

card inherits controller irq here, ahh pci behaviour! :).
 I do want isa behaviour then! :).  Well, but if seriously im stuck. Seems like
no good olde i82365 under 2.6 now.