pcmcia

[Luo, Lucy]

Thanks Russel. But I have a TI PCI1510 cardbus controller, when I inserted a
cardbus card, I'm reading 0xffs on all the card's config header regs. Where
should I go about the problem?

Lucy 

-----Original Message-----
From: Russell King [mailto:rmk+pcmcia at arm.linux.org.uk] 
Sent: Monday, October 11, 2004 4:37 PM
To: Luo, Lucy
Cc: linux-pcmcia at lists.infradead.org
Subject: Re: pcmcia

On Mon, Oct 11, 2004 at 03:39:17PM -0700, Luo, Lucy wrote:
> I'm new to pcmcia, have a general question on PCMCIA if anybody can help
me.
> How is the configuration space accessed on a card inserted into a
> PCI-cardbus bridge? With the bus/slot/func/reg combination as with devices
> on bus 0?

We hardly ever use the "physical" location of a device to access its
configuration space - we always have a struct pci_dev which contains
the necessary information.

> If power is not applied to the socket interface correctly, will you still
be
> able to read the cards config info?

Probably not.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core