trouble with TI PCI1410 on IBM G40 w/ 2.6.6
joshua reich
josh at i2pi.com
Thu May 27 07:49:33 EDT 2004
Thanks for all your help btw. :)
[snip]
>"lspci -v" used to show "Memory at 3f6fb000". I believe that area has
>shifted elsewhere because 0x3f700000-0x40000000 is now marked as reserved
>(which is a good thing).
>
>Please post the output of "lspci -v" for the bridge again, after booting
>with --no-mem-option and 1Gb of memory.
>
>Also please post the contents of /proc/iomem (you posted /proc/meminfo).
>
Booted with 1GB and no-mem-option:
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc800-000cdfff : Adapter ROM
000ce000-000cffff : reserved
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-0f6effff : System RAM
00100000-002ff97e : Kernel code
002ff97f-003cc5ff : Kernel data
0f6f0000-0f6fffff : reserved
0f700000-3f6effff : System RAM
3f6f0000-3f6f7fff : ACPI Tables
3f6f8000-3f6f9fff : ACPI Non-volatile Storage
3f6fa000-3f6fa3ff : 0000:00:1f.1
3f6fb000-3f6fbfff : 0000:02:01.0
3f6fb000-3f6fbfff : yenta_socket
3f700000-3fffffff : reserved
40000000-403fffff : PCI CardBus #03
40400000-407fffff : PCI CardBus #03
d0000000-d007ffff : 0000:00:02.0
d0080000-d00fffff : 0000:00:02.1
d0100000-d01003ff : 0000:00:1d.7
d0100000-d01003ff : ehci_hcd
d0100800-d01008ff : 0000:00:1f.5
d0100800-d01008ff : Intel 82801DB-ICH4 - Controller
d0100c00-d0100dff : 0000:00:1f.5
d0100c00-d0100dff : Intel 82801DB-ICH4 - AC'97
d0200000-d020ffff : 0000:02:00.0
e0000000-e7ffffff : 0000:00:02.0
e8000000-efffffff : 0000:00:02.1
ff800000-ffffffff : reserved
02:01.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
Subsystem: IBM: Unknown device 054e
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 3f6fb000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 40000000-403ff000 (prefetchable)
Memory window 1: 40400000-407ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
dmesg output just in case that helps:
Linux version 2.6.6 (root at laplap.i2pi.com) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #6 Wed May 26 13:22:19 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable)
BIOS-e820: 000000000f6f0000 - 000000000f700000 (reserved)
BIOS-e820: 000000000f700000 - 000000003f6f0000 (usable)
BIOS-e820: 000000003f6f0000 - 000000003f6f8000 (ACPI data)
BIOS-e820: 000000003f6f8000 - 000000003f6fa000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v002 IBM ) @ 0x000f7330
ACPI: XSDT (v001 IBM TP-1T 0x00001120 LTP 0x00000000) @ 0x3f6f23db
ACPI: FADT (v002 IBM TP-1T 0x00001120 IBM 0x00000001) @ 0x3f6f241f
ACPI: SSDT (v001 IBM TP-1T 0x00001120 MSFT 0x0100000d) @ 0x3f6f24d3
ACPI: ECDT (v001 IBM TP-1T 0x00001120 IBM 0x00000001) @ 0x3f6f7f87
ACPI: BOOT (v001 IBM TP-1T 0x00001120 LTP 0x00000001) @ 0x3f6f7fd8
ACPI: DSDT (v001 IBM TP-1T 0x00001120 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line:
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2390.620 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 906096k/917504k available (2046k kernel code, 10600k reserved, 819k data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4718.59 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd966, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
udf: registering filesystem
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
[drm] Initialized i810 1.4.0 20030605 on minor 0
[drm] Initialized i830 1.3.2 20021108 on minor 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23EA-40B, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: DW-224E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 72319989 sectors (37027 MB)
native capacity is 78140160 sectors (40007 MB)
hda: 72319989 sectors (37027 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: capability 0001 at 68
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem f8886000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
ehci_hcd 0000:00:1d.7: root hub device address 1
[ ... snip usb debug output ... ]
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
atkbd.c: Unknown key pressed (translated set 2, code 0x1d on isa0060/serio0).
atkbd.c: Use 'setkeycodes 1d <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x1d on isa0060/serio0).
atkbd.c: Use 'setkeycodes 1d <keycode>' to make it known.
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
intel8x0_measure_ac97_clock: measured 49330 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801DB-ICH4 at 0xd0100c00, irq 11
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost at snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 228k freed
uhci_hcd 0000:00:1d.0: suspend_hc
uhci_hcd 0000:00:1d.1: suspend_hc
uhci_hcd 0000:00:1d.2: suspend_hc
Adding 2426752k swap on /dev/hda4. Priority:-1 extents:1
Linux Kernel Card Services
options: [pci] [cardbus]
Yenta: CardBus bridge found at 0000:02:01.0 [1014:054e]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x011c1112, devctl 0x64
Yenta: socket->probe_status = 0. Returning 1
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 00200f00
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
mtrr: base(0xe0000000) is not aligned on a size(0x180000) boundary
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
--
joshua reich
josh!i2pi.com
Ph: +61 (0) 3 9415 9557
Mb: +61 (0) 408 355 788
More information about the linux-pcmcia
mailing list