TI1510 again

[Warren Melnick]

I grabbed a fresh 2.4.26 and applied the pcmcia-ti-routing-9_v24.patch
to it.  I compiled everything into the kernel itself.

This is in the dmesg:
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 5 for device 00:0b.0
PCI: Sharing IRQ 5 with 00:10.3
Yenta TI: socket 00:0b.0, mfunc 0x00c01002, devctl 0x66
Yenta TI: socket 00:0b.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 00:0b.0 falling back to parallel PCI interrupts
Yenta TI: socket 00:0b.0 no PCI interrupts. Fish. Please report.

and when I insert a wireless card the system freezes.

Again the chip is a TI 1510.  Any help here would be appreciated,
including anything that I might be able to send back to the company that
designed the motherboard to tell them why this is happening and how they
can rewire things to fix it.

lspci shows:
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
00:0b.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus
Controller
00:0c.0 Multimedia controller: Sigma Designs, Inc.: Unknown device 8475
(rev 03)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97
Audio Controller (rev 50)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03)

Thanks,
Warren