FW: TI1510 probelm - can you help direct me?

[Russell King]

On Thu, May 06, 2004 at 07:28:45PM -0400, Pavel Roskin wrote:
> On Thu, 6 May 2004, Pavel Roskin wrote:
> 
> > In my case, I have found that the I/O window at 0x4000-0x40ff should not
> > be used by cardbus.  It can be achieved by adding "reserve=0x4000,0x100"
> > to the kernel command line.
> 
> I enabled CONFIG_PNPBIOS in the kernel and found what uses that range.
> >From lspnp output (lspnp utility is included with pcmcia-cs):
> 
> 0a PNP0a03 bridge controller: PCI
>         io 0x0294-0x0297
>         io 0x04d0-0x04d1
>         io 0x0cf8-0x0cff
>         io 0x0480-0x048f
>         io 0x4000-0x40f7

Can you dump the PCI numeric IDs of your host bridge please?

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core