2.6.x kernels & PCI-to-PCMCIA bridges [again]

[jar]

Russell King wrote:

> It's still buggy.  Here's some further comments:
I see.

> Can someone provide me with the output of 'lspci' of a system using
> this cardbus bridge please?

[root at gw1 root]# lspci -vvvv
00:00.0 Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 01)
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
         Latency: 32

00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] 
(rev 01)
         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0

00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] 
(prog-if 80 [Master])
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32
         Region 4: I/O ports at e800 [size=16]

00:09.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] 
(rev 54) (prog-if 00 [VGA])
         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 0
         Region 0: Memory at e0000000 (32-bit, non-prefetchable)

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
         Subsystem: Allied Telesyn International AT-2500TX/ACPI
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (8000ns min, 16000ns max)
         Interrupt: pin A routed to IRQ 10
         Region 0: I/O ports at e000
         Region 1: Memory at df800000 (32-bit, non-prefetchable) [size=256]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME+

00:0b.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev 07)
         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort+ 
<TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 5
         Region 0: I/O ports at d800

Regards, Jar