JVC mininote laptop CDROM not working
richard kennedy
richard_s_k at yahoo.co.uk
Tue Jul 13 18:23:27 EDT 2004
Hi,
I'm running Fedora core 2 on a JVC mininote 7230
laptop with a pcmcia CDROM (JVC MP-CDX1) using a stock
kernel.org 2.6.7.
I have not been able to get the CDROM working on any
kernel version. Can you suggest how I can get this
working or anything else I should try or is there any
other info you need ?
I get the following in the log file on init of the
controller
kernel: Linux Kernel Card Services
kernel: options: [pci] [cardbus] [pm]
kernel: Yenta: CardBus bridge found at 0000:00:09.0
[1043:1674]
kernel: Yenta: ISA IRQ mask 0x0008, PCI irq 11
kernel: Socket status: 30000006
kernel: Yenta: CardBus bridge found at 0000:00:09.1
[1043:1674]
kernel: Yenta: ISA IRQ mask 0x0008, PCI irq 11
kernel: Socket status: 30000006
The mininote only has 1 card slot, but I guess from
the above the controller can handle 2 ?
inserting the card gives
kernel: cs: pcmcia_socket0: unable to apply power.
cardmgr[1949]: unsupported card in socket 0
cardmgr[1949]: product info: "KME", "KXLC005", "00"
cardmgr[1949]: manfid: 0x0032, 0x2904 function: 8
(SCSI)
The /etc/pcmcia/config did not have an entry for the
cd so I looked it up pcmcia.sourceforge project and
they use ide-cs.
Adding the entry for ide-cs and retrying gives ...
cardmgr[2015]: socket 0: JVC KXLC005
kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
cardmgr[2015]: get dev info on socket 0 failed: No
such device
kernel: ide-cs: GetNextTuple: No more items
I'm not sure what else to try, have I got the wrong
module ?
Below is lspci -vv
Thanks in advance for your help
Richard
/sbin/lspci -vv
00:00.0 Host bridge: Silicon Integrated Systems [SiS]
630 Host (rev 31)
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d4000000 (32-bit,
non-prefetchable)
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+
ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+
GART64- 64bit- FW- Rate=x2
00:00.1 IDE interface: Silicon Integrated Systems
[SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS]
SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16
Region 4: I/O ports at d800 [size=16]
00:01.0 ISA bridge: Silicon Integrated Systems [SiS]
SiS85C503/5513 (LPC Bridge) Control: I/O+ Mem+
BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 Ethernet controller: Silicon Integrated
Systems [SiS] SiS900 PCI Fast Ethernet (rev 82)
Subsystem: Asustek Computer, Inc.: Unknown
device 1455
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at d400
Region 1: Memory at d3800000 (32-bit,
non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=160mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:01.4 Multimedia audio controller: Silicon
Integrated Systems [SiS] SiS PCI Audio Accelerator
(rev 02)
Subsystem: Asustek Computer, Inc.: Unknown
device 1473
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin B routed to IRQ 7
Region 0: I/O ports at d000
Region 1: Memory at d3000000 (32-bit,
non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+
AuxCurrent=55mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97
Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Asustek Computer, Inc.: Unknown
device 1616
Control: I/O+ Mem- BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at b800
Region 1: I/O ports at b400 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:02.0 PCI bridge: Silicon Integrated Systems [SiS]
Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d2800000-d2ffffff
Prefetchable memory behind bridge:
d8000000-e7efffff
Expansion ROM at 0000a000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort-
>Reset- FastB2B-
00:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev
88)
Subsystem: Asustek Computer, Inc.: Unknown
device 1674
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 000de000 (32-bit,
non-prefetchable)
Bus: primary=00, secondary=02, subordinate=05,
sec-latency=176
Memory window 0: 10400000-107ff000
(prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort-
>Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:09.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev
88)
Subsystem: Asustek Computer, Inc.: Unknown
device 1674
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 10000000 (32-bit,
non-prefetchable)
Bus: primary=00, secondary=06, subordinate=09,
sec-latency=176
Memory window 0: 10c00000-10fff000
(prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort-
>Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:09.2 System peripheral: Ricoh Co Ltd: Unknown
device 0576
Subsystem: Asustek Computer, Inc.: Unknown
device 1674
Control: I/O- Mem- BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 10001000 (32-bit,
non-prefetchable) [disabled]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2
PME+
00:0a.0 FireWire (IEEE 1394): Texas Instruments
TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown
device 1677
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache
Line Size 08
Interrupt: pin A routed to IRQ 4
Region 0: Memory at d2000000 (32-bit,
non-prefetchable)
Region 1: Memory at d1800000 (32-bit,
non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME+
00:0f.0 USB Controller: NEC Corporation USB (rev 43)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown
device 0035
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), Cache
Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d1000000 (32-bit,
non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:0f.1 USB Controller: NEC Corporation USB (rev 43)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown
device 0035
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), Cache
Line Size 08
Interrupt: pin B routed to IRQ 7
Region 0: Memory at d0800000 (32-bit,
non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:0f.2 USB Controller: NEC Corporation USB 2.0 (rev
04) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown
device 00e0
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8500ns max), Cache
Line Size 08
Interrupt: pin C routed to IRQ 5
Region 0: Memory at d0000000 (32-bit,
non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
01:00.0 VGA compatible controller: Silicon Integrated
Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev
31) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown
device 1672
Control: I/O+ Mem+ BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
BIST result: 00
Region 0: Memory at d8000000 (32-bit,
prefetchable)
Region 1: Memory at d2800000 (32-bit,
non-prefetchable) [size=128K]
Region 2: I/O ports at a800 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+
ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+
GART64- 64bit- FW- Rate=x2
ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself http://uk.messenger.yahoo.com
More information about the linux-pcmcia
mailing list