[PATCH] nvme: fix swapped ZRASF zone state values for full and read only

[Andreas Hindborg]

From: Karl Bonde Torp <k.torp at samsung.com>

The Zone Management Receive command Zone Receive Action Specific (ZRASF)
reporting option values for the Full and Read Only zone states are swapped
compared to the NVM Express Zoned Namespace Command Set Specification,
Revision 1.5, Figure 35:

- 5h lists the zones in the ZSF:Full state.
- 6h lists the zones in the ZSRO:Read Only state.

The nvmet ZNS backend uses these constants to map the ZRASF value received
from the host to a block layer zone condition when filtering zones in
Report Zones. Because of the swap, a host asking for full zones was given
the read only zones, and a host asking for read only zones was given the
full zones.

Swap the values of NVME_ZRASF_ZONE_STATE_FULL and
NVME_ZRASF_ZONE_STATE_READONLY to match the specification.

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Cc: stable at vger.kernel.org
Signed-off-by: Karl Bonde Torp <k.torp at samsung.com>
---
Signed-off-by: Andreas Hindborg <a.hindborg at kernel.org>
---
 include/linux/nvme.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 91ce434a7e8d..6248711784b3 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -1266,8 +1266,8 @@ enum {
 	NVME_ZRASF_ZONE_STATE_IMP_OPEN	= 0x02,
 	NVME_ZRASF_ZONE_STATE_EXP_OPEN	= 0x03,
 	NVME_ZRASF_ZONE_STATE_CLOSED	= 0x04,
-	NVME_ZRASF_ZONE_STATE_READONLY	= 0x05,
-	NVME_ZRASF_ZONE_STATE_FULL	= 0x06,
+	NVME_ZRASF_ZONE_STATE_FULL	= 0x05,
+	NVME_ZRASF_ZONE_STATE_READONLY	= 0x06,
 	NVME_ZRASF_ZONE_STATE_OFFLINE	= 0x07,
 	NVME_REPORT_ZONE_PARTIAL	= 1,
 };

---
base-commit: 72d3fcf802c45d00b300f25b848a93c3a2bd7c7e
change-id: 20260929-nvme-zns-fabrics-field-fix-506fa454e5aa

Best regards,
--  
Andreas Hindborg <a.hindborg at kernel.org>