[PATCH] nvme: do not reset controllers in NVME_CTRL_NEW state

[Keith Busch]

On Tue, Sep 15, 2026 at 11:58:27AM +0200, Maurizio Lombardi wrote:
> During NVMe controller creation, the controller is exposed to sysfs via
> nvme_add_ctrl() while it is still in the NVME_CTRL_NEW state.
> This creates a narrow race window where a userspace process can write to
> the reset_controller sysfs node before the initialization thread
> transitions the state to NVME_CTRL_CONNECTING.
> 
> If a reset is triggered during this window, the state machine allows the
> transition from NVME_CTRL_NEW to NVME_CTRL_RESETTING, and the reset work
> is queued. However, the original creation thread continues its execution,
> subsequently moving the state to NVME_CTRL_CONNECTING and finally to
> NVME_CTRL_LIVE.
> 
> When the delayed reset work finally executes, it attempts to tear down
> the controller and transition the state to NVME_CTRL_CONNECTING. Because
> the state is now NVME_CTRL_LIVE, this transition fails, triggering a
> WARN_ON in the reset work.
> 
> Fix this by removing NVME_CTRL_NEW from the allowed prior states for
> the NVME_CTRL_RESETTING transition.

Thanks, applied to nvme-7.3.